Introducing recommended products from ENDURANCE, a long-established Honda parts manufacturer! A must-see for Honda Minimoto owners!

• CT125 Hunter Cub
• DAX125
• GROM

• 
• 
• 

If you own a Honda, you've likely heard of them. Here, we would like to introduce a parts manufacturer called ENDURANCE. Recently, they have been focusing on aftermarket parts for touring minimoto Honda bikes, but they are a brand with a long history that was originally born in the world of racing. Their history dates back to 1983, and many bikes sporting their exhaust systems can be seen on the mini circuit. Even today, they supply parts to Astemo Honda Dream SI Racing, who participate in the All Japan Road Race Championships, as well as being involved in the development of MotoGP machines as an HRC OFFICIAL SPONSOR. Their high-precision parts produced with the technology cultivated in the racing world are loved not only by racers but also by many touring riders. They've got the knowhow for both racing and touring, so here are some of our most recommended products from their diverse lineup.

Rear Rack & Box

The DAX125 is the newest addition to Honda's minimoto lineup, and ENDURANCE was quick to release a rear rack and box for it. The DAX125 is good for quick spontaneous trips, but it doesn't have any carrying capacity. It's a hassle to wear a backpack all the time, but with this rack and box attached you can ride free and comfortably. This is exactly what you need to solve the problem of worrying about how much you can carry back with you from a shopping trip.

They also offer a set that includes the rack and box. There are two capacities available: 30L and 50L. As a rough guide, 30L can hold one helmet, and 50L can hold two helmets. Personally, I think 30L is enough if you do not plan to put a lot of things in it.

Grip Heater

It may not be well known, but ENDURANCE also offers grip heaters. This is a relatively recent product, and it is designed with the user's opinions in mind as only a latecomer can. What is particularly good about it is that there is no clutter around the handlebars. Other than the grip itself, there is only a very slim switch and indicator light, so you can warm up in style. What's more, it also functions as a voltmeter. It displays the voltage in 5 levels when the key is turned on.

Since it is a universal product, it can be used for various models. The grip diameter is 34mm, which is only a few millimeters thicker than the stock grip, and the price is less than 10,000 JPY, so it's very cost-effective. We recommend this grip heater for anyone, so why not give it a try this winter?

Handle Crossbar

Handlebar crossbar for the CT125 Hunter Cub. This is not just a dress-up part. By installing it, vibrations transmitted from the handlebar will be reduced. In addition, the center part is the same 22.2mm diameter as the handlebar, so it is possible to attach a smartphone holder. With its various advantages, this Handle Crossbar is the No. 1 selling ENDURANCE product at Webike.

Fender Eliminator Kit

There are many fender eliminator kits for the 5-speed GROM, but we recommend ENDURANCE. The reason is their perfect balance of ease of installation, high precision, and low price. Since the GROM already has a sporty image, it will look even cooler when you eliminate the fender. When it comes to custom parts for Honda 4-Minis, you can't go wrong if you choose ENDURANCE.

Reinforced Side Stand Bracket

This reinforced side stand bracket is for the CT125 Hunter Cub. It prevents the center of gravity from moving backward and the front tire from lifting when the rear rack is loaded. Installing the bracket changes the position of the side stand to prevent lifting. This is something that riders who go on camping tours will want. An important note is that it is exclusive to the Hunter Cub. With parts from other manufacturers, the side stand switch gets canceled because you have to replace the side stand itself, and they can be difficult to install since they are not model exclusive. We recommend this product for campers who always carry a lot of stuff with them.

Racing Seat for GROM

This is a racing seat that fits the JC75 GROM, but can actually be used on the street by transplanting the pillion belt from the stock seat. Why are we introducing racing parts in the first place? It's because the stock seat of the JC75 GROM is designed with two levels, perhaps with pillion riding in mind, and when riding alone, it hinders a free riding position. This racing seat is beneficial not only for racers, but also for your average rider. Some riders who have installed this seat have asked why it was not used from the beginning. If you have a GROM2 with the stock seat, please try this seat and experience the joy of a free riding position.

If you're looking for custom parts for a Honda bike, go with ENDURANCE!

As a manufacturer founded on endurance racing, ENDURANCE offers a wide range of highly reliable products. In fact, many of their products are designed for touring, so much so that not many people think of them as a racing company anymore. However, I would like you to know that they are actually a manufacturer full of racing spirit. I myself use ENDURANCE cowls and sprocket guards on the racetrack, and the price and precision are excellent. If you are a Honda owner, I would recommend ENDURANCE's products first and foremost.