Lawson Modification with Clip-ons: Z1000R Custom

• Z1000R

• 
• 
• 

BULL DOCK's Z1000R

Most GT-M (Genuine Tuning Machine, a complete custom-built bike by Bull Dock) are equipped with 17-inch wheels, but this recent Lawson replica the Kawasaki Z1000R is equipped with 18-inch wheels and clip-on handlebars. The standing figure with a low stance and a raised tail is beautiful. This is supported not only by the dimension settings and the original construction, but also by the settings.

The parts are set up considering the weight of the bike, the balance between front and rear, and the movements. Respecting the owner's ideals, Bull Dock try to make sure that looks and function are well balanced. When taking an order and tailoring it from the frame, that element is also incorporated. Every version of the GT-M looks beautiful and runs well.

Handle

The bikini cowl is McCoy brand, and the STACK tachometer/fuel gauge, motogadget speedometer, and indicator lights are laid out in a balanced layout inside it. The left and right masters are Brembo Radials, with McCoy steering stem and clip-on handlebars. The mirrors are carbon products made by Magical Racing.

Electrical

The front side Active blinkers are laid out on both sides of the oil cooler. Even a bike equipped with a bikini cowl can create a comfortable look as shown in the overall photo.

Rear side blinkers are based on carbon license plate holder and are placed on both sides of the license plate. In addition to the looks, the rear end can be organized in a lightweight manner and is highly visible.

Engine

The engine was converted to 1135cc with forged pistons by Pistal Racing and Yoshimura ST-1 camshafts. Internal combustion engine processing is done in-house at Bull Dock.

Intake & Exhaust

The carburetor is Yoshimura TMR-MJN Φ36mm. For the exhaust system to be combined, Win Mccoy full titanium is chosen, including the silencer.

Bodyworks

Steps are Mccoy. In addition to the beautiful design, the product is designed to ensure rigidity and to avoid any impact on driving in the event of a fall.

Chassis

The front forks are Ohlins RWU Φ43mm, and the front brakes are a combination of Brembo 4-piston calipers and Sunstar discs.

The swingarms are Mccoy aluminum in black, and the rear shocks are Ohlins Legend Twin. The front and rear wheels are forged aluminum Lavorante, with sizes 2.75-18/4.50-18 inches, and the wheel color selected is gold, which suits the Z1000R well.

Gallery

Specifications

Part	Details
Engine	PISTAL RACING Φ73 Forged Pistons YOSHIMURA ST-L1 Camshaft
Carb / Intake	YOSHIMURA MIKUNI TMR36 Carburetor
Exhaust	BULL DOCK Win Mccoy Full Exhaust System
Frame	BULL DOCK ULTIMATE Mccoy Stem Kit BULL DOCK ULTIMATE Mccoy Swingarm
Brake	Brembo Racing Radial Brake Master Cylinder (19×18) Brembo Brake Caliper P4 30 / 34 40mm Brembo Brake Caliper P4 30/34 40mm SUNSTAR Custom Type Discs (Front) Brembo P2-RS84 Rear Brake Caliper P2 34 84mm SUNSTAR Premium Racing Disc (Rear) BULL DOCK ULTIMATE Mccoy Caliper Bracket
Wheels	BULL DOCK ULTIMATE LAVORANTE Legenda 2.75-18 (Front) BULL DOCK ULTIMATE LAVORANTE Legenda 4.50-18 (Rear)
Suspension	Ohlins RWU Upright Front Forks OHLINS Rear Suspension Legend-Twin
Steps	BULL DOCK Mccoy Rearsets
Drive System	BULL DOCK Outboard BULL DOCK Sprocket RK Standard Series Chain 520X-XW
Handle / Steering	Magical Racing NK1 Mirror TYPE-1 YOSHIMURA PRO-GRESS2 Multi-temp Meter Brembo 17RCS Radial Clutch Master Cylinder STACK ST200 Clubman Tachometer RADICAL Moto Gadget Moto Scope Mini Multi Function Meter BULL DOCK Front Cowl
Electrical	ACTIVE LED License Plate Side Blinker Straight

About BULL DOCK

We have also released an article on BULL DOCK to our "BWK" series, so check the links below.

BULL DOCK brand page

Original Source of this Article

Heritage & Legends