suzuki_gsxr750_Iidaracingfactory_1.jpg?v=1662350288 CUSTOM
  • facebook.png
  • twitter.png
  • reddit.png

Suzuki GSX-R750 Custom by IidaRacingFactory

  • facebook.png
  • twitter.png
  • reddit.png
 7 min read

Japanese Custom Culture

Here is an original series "JCC" stands for "Japan Custom culture" written by Webike Japan. There is no doubt that Japan has one of the best and unique custom parts and its culture in the motorcycle industry, but the language barrier has led to the closure of JDM motorcycle culture to the outside of Japan. Through this JCC contents, we present you one of a kind custom and mods bikes by professional craftmen and enthusiasts who just can't stop loving motorcycle.

IidaRacingFactory's GSX-R750


Around 1985, when oil-cooled machines first appeared in Japan, there was a boom in racer replicas, and the Suzuki GSX-R750 was at the core of this boom. The owner of this vehicle, Mr. Hashimoto, is one such person, and he says that when the '88 GSX-R750 (J-type) was introduced, it was a big shock to him.


As you can see, the stock styling, including the stock Suzuki racing colors, was utilized while souped up the necessary parts. The Cyclone exhaust, rearset, etc, are all selected from Yoshimura products which is royal road-going style, and the specifications, such as the white 17-inch wheels (here, the rear wheels have been replaced with GSX-R1100 wheels) are AMA style as they are. The front forks were modified with new inner springs, the rear with an Ohlins unit for the GSX-R750RK, and the carburetors were changed to TMR-MJN with direct ignition to strengthen and modernize the ignition. The cooling system is also equipped with a self-made line. A sub oil cooler converted from the water-cooled GSX-R1100 was also added to the cooling system.



Based on the '88 GSX-R750 (J), the only short-stroke model in the series, the exterior and frame are stock, including the single seat cover. The stickers that are not present on each part of the machine have been made by the owner, but even when viewed up close, the finish is clean and unmarked.



The instrument panel is made of carbon and has the same layout as the stock one, with Yoshimura's digital multimeter added in the upper left corner for a centralized layout. Clip-on handlebars were made by Battle Factory. The high throttle and switches were changed accordingly.



The engine is an '88 model Φ77 x 43.7mm (Φ70 x 48.7mm for other years), and an oil catch tank was added inside the left rear of the cowl. The sub oil cooler is a water-cooled GSX-R1100 model, and the owner rebuilt this line several times to complete it. The ignition system is also converted to direct ignition.


The TMR-MJN φ36mm carburetor was used as opposed to the stock BST36. The funnel cover is installed in the same way as the '88 DAYTONA, which is also desirable.



According to the owner, Mr. Hashimoto, the chassis was stock for this J-type with Φ43mm forks and 17-inch front and rear, so there was no difficulty in tire selection. Nevertheless, the front forks were built with WP springs, and the front and rear brake discs were souped-up with Sunstar brake discs.


The rear shocks are Ohlins for the '89 GSX-R750RK, similar in dimension to the J-type R750. The drive chain was also changed to RK's 520X XW.


The front and the rear wheels were originally 3.50/4.50 wide, and the rear wheel was converted to the modern standard 3.50/5.50 width by replacing them with 5.50 width for the GSX-R1100 (L~). Tires are Michelin POWER CUP in 120/70ZR17 and 180/55ZR17 sizes. The exhaust system and rearsets are Yoshimura product. The torque rods have also been shortened.


suzuki_gsxr750_Iidaracingfactory_1.jpg suzuki_gsxr750_Iidaracingfactory_2.jpg suzuki_gsxr750_Iidaracingfactory_3.jpg
suzuki_gsxr750_Iidaracingfactory_4.jpg suzuki_gsxr750_Iidaracingfactory_5.jpg suzuki_gsxr750_Iidaracingfactory_6.jpg
suzuki_gsxr750_Iidaracingfactory_7.jpg suzuki_gsxr750_Iidaracingfactory_8.jpg suzuki_gsxr750_Iidaracingfactory_9.jpg


Part Details
Exhaust YOSHIMURA Cyclone Exhuast
Brake SUNSTAR Custom Type Front Disc Rotor
Suspension WP Spring
OHLINS Rear Suspension S46HR1C1L
Drive System RK Standard Series Chain 520X-XW
Handle / Steering BATTLE FACTORY Aluminum Welding Handlebar Φ50
Electrical YOSHIMURA Multi Degital Temp Meter

About IidaRacingFactory

A custom parts specialty store operating in Kawasaki, Japan. The company offers a variety of services, including motorcycle maintenance as well as orders for one-off parts production.


Original Source of this Article

Heritage & Legends




A foreigner who rides in Japan, Japanese call this "Gaijin Rider". Third year in the Webike global team. He feels and shares the real bike life in Japan then presents you how interesting Japanese customs are.