31 Reviews View type:
- Fits:
- HONDA gyro canopy (Not available for current 4-stroke vehicles)
I bought this tire because it is dangerous for MINI cars with wide tires to have contact with the cargo bed and tires at the corner. The rear end of the car was raised by about 10 cm, while the suspen...Read More - Fits:
- HONDA CB1000 SF (Big One) 92-97 SC30
- HONDA CB1300 SF 98-13 SC40
- HONDA CB1300 SF 98-13 SC54
- HONDA CB400SUPER BOLDOR 05-08 NC39
- HONDA NC750S 12-13 ABS
- ...and more.
I had to replace the OEM footpeg because it broke off at the base due to a standing error in XELVIS.Aluminum casting parts are not very tenacious, so when they break, they break easily.This one from a...Read More - Fits:
- HONDA MONKEY 2.6PS(6V) Z50J-12000171510400
- HONDA MONKEY 3.1PS(6V) Z50J-16000081805927
- HONDA GORILLA 3.1PS(6V) Z50J-16000081805927
- HONDA MONKEY (12V) AB27-1000001
- HONDA MONKEY (12V) Z50J-2000001
- ...and more.
I thought about looking for an OEM product, but I didn't think it would be this inaccurate, so I tried The footpegs were unnecessary because they were replaced with ones made by Takekawa, but they wer...Read More - Fits:
- HONDA CB1000 SF (Big One) 92-97 SC30
- HONDA CB1300 SF 98-02 SC40
- HONDA CB1300 SF 03-08 SC54
- HONDA CB1300SUPER BOLDOR 03-08 SC54
- HONDA CB400SF 99-08 V Revo NC39
- ...and more.
I bent the footpeg when I stood up and mangled it, so I replaced itIt is installation in CB400SB of 2012 MODELThe shape is slightly shorter on the Knee Slider, but the rest is the same look as the OEM...Read More - Fits:
- HONDA CB1000 SF (Big One) 92-97 SC30
- HONDA CB1300 SF 98-02 SC40
- HONDA CB1300 SF 03-08 SC54
- HONDA CB1300SUPER BOLDOR 03-08 SC54
- HONDA CB400SF 99-08 V Revo NC39
- ...and more.
It was listed as inspected, but the knee slider is wobbly!Either the Screw hole was thicker or the Bolt was thinner, and it was in the bag in spotted form!I applied screw lock agent and installed it, ...Read More - Fits:
- HONDA MONKEY 2.6PS(6V) Z50J-12000171510400
- HONDA MONKEY 3.1PS(6V) Z50J-16000081805927
- HONDA GORILLA 3.1PS(6V) Z50J-16000081805927
- HONDA MONKEY (12V) AB27-1000001
- HONDA MONKEY (12V) Z50J-2000001
- ...and more.
When I opened it up, I found that the footpegs were both angled quite high! It took quite some time to cut with File and to make it satisfactory When it installs, Left Side seems to have gone out a li...Read More - Fits:
- HONDA TODAY All years AF67
- HONDA TODAY All years AF61
The cheap ones made in foreign countries have a thin bellows part that tears easily It was This is a low price, but the build quality is very solid The look and feel of the bike has been refreshed and...Read More - Fits:
- HONDA CB1000 SF (Big One) 92-97 SC30
- HONDA CB1300 SF 98-02 SC40
- HONDA CB1300 SF 03-08 SC54
- HONDA CB1300SUPER BOLDOR 03-08 SC54
- HONDA CB400SF 99-08 V Revo NC39
- ...and more.
Previously, I turned on with CB 750I lost footpeg of CB 1300 this time - -The OEM is crisp and high. (Large pattern)This Manufacturer is also good in quality and good looking. It is cheap.Good product...Read More - Fits:
- YAMAHA TMAX530 B232 [SJ12J]
- YAMAHA TMAX530 59CX [SJ12J]
- YAMAHA TMAX530 59CW [SJ12J]
- YAMAHA TMAX530 59CV [SJ12J]
- YAMAHA TMAX530 59CL [SJ12J]
- ...and more.
There is no Instruction Manual! Bush can not enter unless you extend the hole for installation!. Spreading too much will make it idle. Clumsy person is cautioned for installation.Read More - Fits:
- KAWASAKI GPZ1100 95-99
- KAWASAKI GPZ1100 95-99 ABS
- KAWASAKI Z750 (water-cooled) 07-08
- KAWASAKI ZR-7/S 99-05
- KAWASAKI ZR-7/S 99-05
- ...and more.
The width of the attachment part is wide, it does not enter as it is and it does not move. By the way, since the pin hole is not perpendicular to the face, Pin does not pass even if it is cut until it...Read More - Fits:
- HONDA FUSION MF02 ALL MODEL
thanks for the great wheel set and also the
Repeat Customer Appreciation Point.everything is were awesome .want to order everything you stock
Read More - Fits:
- HONDA CB1000 SF (Big One) 92-97 SC30
- HONDA CB1300 SF 98-02 SC40
- HONDA CB1300 SF 03-08 SC54
- HONDA CB1300SUPER BOLDOR 03-08 SC54
- HONDA CB400SF 99-08 V Revo NC39
- ...and more.
I bent the Normal step and checked the OEM Parts Number, so it was quite a good priceIf you look for Wae Big, get to this item, Standard Type and Wide (Wide) TypeI bought two kinds.Quantity : Even if ...Read More - Fits:
- HONDA MONKEY 2.6PS(6V) Z50J-12000171510400
- HONDA MONKEY 3.1PS(6V) Z50J-16000081805927
- HONDA GORILLA 3.1PS(6V) Z50J-16000081805927
- HONDA MONKEY (12V) AB27-1000001
- HONDA MONKEY (12V) Z50J-2000001
- ...and more.
I think whether it is problematic whether it attaches to price or not.In my case I attached nothing without problems.Let's buy OEM if you are uneasy.Let's give up even if you buy it cheaply.Th...Read More - Fits:
- HONDA MONKEY
- HONDA GORILLA *Process is required for 10 inch length
Until now, when I was looking for Front fork to make 10 inc in Size up, it was FTire 8 inch, so I happened to purchase for 10-inchesInverted Front Fork, so I bought it. If you have experience of disas...Read More - Fits:
- SUZUKI ADDRESSV125 CF46A CF4EA CF4MA
I think that it is very excellent in COSPA.Wheel bearing I was worried was accurately press fitted. The product itself had SmallWound at the time of storage, but I did not mind.Weight difference with ...Read More - Fits:
- YAMAHA MAJESTY250(SG03J)
In order to change the height and angle of Rear suspension, I tried using it although the model is different, but after all it did not go well.Some people attached it with a similar feeling.I think th...Read More - Fits:
- HONDA Support for CHALY
- HONDA DAX 4 Spoke support
Very pleased with purchase! Parts came as described with great finish! Great price for a hard to find item. Shipped on time,would purchase again.Read More - Fits:
- SUZUKI ADDRESSV125 CF46A CF4EA CF4MA
I bought i Net's Plating Fan Cover and I was satisfied with the price and the product in large change so I decided to purchase I Net 's Front fork cover again this time.Installation is very ea...Read More - Fits:
- HONDA MONKEY
- HONDA GORILLA
Very happy with these tires althought they are lower profile then i had expected. They appear to be good quality and make the bike look sharp! they are also DOT approved and this is stamped right on ...Read More - Fits:
- HONDA MONKEY 2.6PS(6V) Z50J-12000171510400
- HONDA MONKEY 3.1PS(6V) Z50J-16000081805927
- HONDA GORILLA 3.1PS(6V) Z50J-16000081805927
- HONDA MONKEY (12V) AB27-1000001
- HONDA MONKEY (12V) Z50J-2000001
- ...and more.
Is there an individual difference? In my case it was attached without problem.I did not expect much for texture because it is inexpensive, but I think it's good enough.Material may be soft, but it...Read More
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING