- Fits:
- KAWASAKI Z900RS SE 18-23
- KAWASAKI Z900RS CAFE 18-23
- KAWASAKI Z900RS 18-23
I used to use OEM high seats and had no complaints, but when I saw the RCMConcept car on the siteI liked the Sharp shape and decided to purchase it after much consideration.I like it the best of all t...Read More - It was just the right size for attaching to the back of the top panel of the Top case.The storage area with a fastener can hold a large size of the vehicle inspection book.It may not work for Seat, a ...Read More
- Fits:
- KAWASAKI ZRX1200R 03 [ZR1200] [Frame No.] ZRT20A-025001 or later
- KAWASAKI ZRX1200 Daeg 16 [ZR1200] [Frame No.] ZRT20D-022001- or later
- KAWASAKI ZRX1200 Daeg 15 [ZR1200] [Frame No.] ZRT20D-019001 or later
- KAWASAKI ZRX1200 Daeg 14 [ZR1200] [Frame No.] ZRT20D-016001 to 019000
- KAWASAKI ZRX1200 Daeg 12 [ZR1200] [Frame No.] ZRT20D-010001 to 013000
- ...and more.
I bought it from Webig and used it for 3 years and 4 months. Although there is some sagging of the Seat Cover, I think it is a great Seat with no loss of external shape and no rattling when removing a...Read More - Fits:
- KAWASAKI GPZ750R 84 [Frame No.] ZX750G-000001 or later
- KAWASAKI GPZ750R 85 Frame No.] ZX750G-007801 or later
- KAWASAKI GPZ750R 86 Frame No.] ZX750G-010101 or later
- KAWASAKI GPZ900R 00 [Frame No.] ZX900A
- KAWASAKI GPZ900R 01 [Frame No.] ZX900A
- ...and more.
My NINJA is an A2 model, so it is almost 40 years old. 10 years ago, it was submerged in a typhoon, so I disassembled and replaced the Seat with a new one. I was not able to remove the wrinkle from th...Read More - Fits:
- KAWASAKI Z900RS 18-21
- KAWASAKI Z900RS CAFE 18-21
Even if the lock is securely locked, the lock will disengage when a load is applied during driving, which can be dangerous.Read More - Fits:
- KAWASAKI GPZ750R 84 [Frame No.] ZX750G-000001 or later
- KAWASAKI GPZ750R 85 Frame No.] ZX750G-007801 or later
- KAWASAKI GPZ750R 86 Frame No.] ZX750G-010101 or later
- KAWASAKI GPZ900R 00 [Frame No.] ZX900A
- KAWASAKI GPZ900R 01 [Frame No.] ZX900A
- ...and more.
Purchased for SeatRepair of the day, Bond, Tucker and Pliers to pull out the old Tucker needle. (Remover) The following is a list of the most important factors that must be taken into consideration wh...Read More - ManufacturerHP recommended L Size, but if you apply the dimensions It's a little big, isn't it?" After much thought and consideration, MSize was chosen.As a result, this is the Large correct answer!Is...Read More
- Fits:
- HONDA Rebel 1100 21 SC83
- HONDA Rebel1100 DCT 21 8BL-SC83
- HONDA Rebel1100 DCT 21 SC83
- HONDA Rebel 1100 21 8BL-SC83
The installation was easy, but the belt on the OEM product could not be exposed, so it had to be covered. It's a pity.Read More - Fits:
- KAWASAKI Z900RS 18-21
- KAWASAKI Z900RS CAFE 18-21
When I was using STD Handlebar and Normal seat, I had a bad leg position and my back was sore when touring, so I bought this Seat to improve the leg position.Thanks to the slightly lower seat height, ...Read More - The S size is used on Z900RS. The manufacturer's website showed the M size, but I chose the S size because it seemed to be hard to put in and out on the sloping part.The female Velcro is sewn to the B...Read More
- Fits:
- YAMAHA SR400 10-17 (RH03J)
With the change to Stinky Seat.I had no problem with it as OEM.Because the Battery is a little bit under Seat, it is a little bit out of control.Installed to align.The fit is very good. Cushion includ...Read More - Fits:
- YAMAHA
- YAMAHA RZ350 80-82
- YAMAHA RZ350 80-82
I purchased this for re-covering for the second time.I was depressed to find a few wrinkles when I checked the base after putting it up, because it had been scraped off.It's MY construction. It tastes...Read More - Fits:
- KAWASAKI Z750FX D2/D3
- KAWASAKI
Cannot be used for z1000st. Processing requiredRead More - Fits:
- HONDA CB1100 typeII 10-17 SC65 *Not available for 18-20.
- HONDA CB1100 typeI 10-17 SC65 *Not available for 18-20.
- HONDA CB1100 RS 17 SC65 *Not available for 18-20 as not tested.
- HONDA CB1100 EX 17 SC65 *Not available for 18-20 as not tested.
- HONDA CB1100 EX 14-16 SC65 *Not available for 18-20.
- ...and more.
The look turned out better than I expected.The texture is not cheap, and the cushion is not bad for a Seat that was designed with an emphasis on appearance, according to the manufacturer.Disappointmen...Read More - Fits:
- YAMAHA SR400 10-17 fe
- YAMAHA SR400 80-08
- YAMAHA SR500 80-08
The look and feel is better, and it's easier to ride;Read More - Fits:
- KAWASAKI GPZ750R 84 [Frame No.] ZX750G-000001 or later
- KAWASAKI GPZ750R 85 Frame No.] ZX750G-007801 or later
- KAWASAKI GPZ750R 86 Frame No.] ZX750G-010101 or later
- KAWASAKI GPZ900R 00 [Frame No.] ZX900A
- KAWASAKI GPZ900R 01 [Frame No.] ZX900A
- ...and more.
Repair the Seat of GPz900R, which has been used for more than 20 years and has become decrepit.Seat cover is dimpled to look and function (Cleat) is also Customized.Unlike OEM, Sponge is also chunky a...Read More - Fits:
- HONDA CB1100 typeII 10-17 SC65 *Not available for 18-20.
- HONDA CB1100 typeI 10-17 SC65 *Not available for 18-20.
- HONDA CB1100 RS 17 SC65 *Not available for 18-20 as not tested.
- HONDA CB1100 EX 17 SC65 *Not available for 18-20 as not tested.
- HONDA CB1100 EX 14-16 SC65 *Not available for 18-20.
- ...and more.
Other sites stated that the RSTank would have a Wrinkle, but when I installed it, it was Exactly and no Wrinkle was inserted.Read More - Fits:
- HONDA NC750X 14-15
- HONDA NC700 12-13
At the age of 50, I obtained a Large 2-wheel license (ReturnRider).I bought an NC750X tepeLD DCT to enjoy touring…Initially, after 30 minutes of riding, my calves hurt from the Right knee…I notice tha...Read More - Fits:
- HONDA NC750X 14-15
- HONDA NC700 12-13
I've been ride with this seat 5 months and i can tell this seat is softer than stock seat and helpful for flat foot.
And the price is pretty good.Read More - Fits:
- KAWASAKI W800 15 [ej800a] [frame no.]ej800a-023001 or later
- KAWASAKI W800 16 [EJ800A] [Frame No.]EJ800A-026001 or later
- KAWASAKI W800 14 [EJ800A] [Frame No.]EJ800A-018001 or later
- KAWASAKI W800 12 [EJ800A] [Frame No.] EJ800A-008001 to 015000
- KAWASAKI W800 13 [EJ800A] [Frame No.]EJ800A-015001 or later
- ...and more.
The W800 Normal seat is narrower in the front, so it is not so bad. cozySeat is wider in the front, so it is uncomfortable in the crotch. The cozySeat is wider in the front part and makes the crotch u...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING