(0)33 Reviews View type:
- Fits:
- HONDA CBR250RR (MC22) 90-
Although it is a part that does not need to be installed, I did not expect such a drastic change in impression with such a simple installation. I can say with confidence that the parenthesis is too go...Read More - Fits:
- SUZUKI GSX-R150
- SUZUKI GSX-R125
The OEM Product is small and does not have the length in the back direction, so the Fender Eliminator KIT is replaced and the mud splatter is noticeable, but this Fender has good length and shape, and...Read More - Fits:
- SUZUKI GSX-R150
- SUZUKI GSX-R125
It took me about three weeks to receive this product.
I was happy to receive it a little earlier than the expected delivery date.
The packaging of the product was also very good.
However, It is ...Read More - Fits:
- YAMAHA YZF-R25
- YAMAHA YZF-R3
Installed on a 2019 YZF-R25Installation was as simple as removing the OEM Chain Guard and fitting it in thereThe texture is very good and the accuracy of the installation is also very good is coming o...Read More - Fits:
- YAMAHA YZF-R25
- YAMAHA YZF-R3
MT-03 is not compatible, but it can be installedI was looking for the longest possible Fender length and came up with this productIf you have a NORMAL rear brake, you can use the Bracket for fixing th...Read More - Fits:
- HONDA VTR250 98- (MC33)
- HONDA VTR250 98- (MC33)
Since the rear suspension was replaced, I installed it to prevent contaminationAs the title suggests, it looks like a Gal arm and Parenthesis is goodIt has a Chain Guard and of course a Sprocket Guard...Read More - Fits:
- YAMAHA YZF-R6 17-21
The installation accuracy is the worst..I divert OEM's Rubber and Screw,As it is, the gap between the product and Swingarm is quite free.It is a rather disappointing finish just because the textur...Read More - Fits:
- HONDA HORNET250
I installed it in HORNET 250. Black Gel As it is, I think that it can be used without problems until it fades. The installation was easy without having to remove the Tire. However, since Brake hose in...Read More - Fits:
- HONDA VTR250 98- (MC33)
- HONDA VTR250 98- (MC33)
I purchased from the other Manufacturer 's Under Cowl that it was made for a long time.If you remove Tire, it will be easier...I installed it with lining clothes because it is a pain..When the car...Read More - Fits:
- HONDA X4
Purchased along with Fender Eliminator after 10 years or more after purchasing Motorcycle.I thought as to what the price would be only for the price, but with Fender Eliminator there was a problem of ...Read More - Fits:
- HONDA NSR80
- HONDA NSR50
- HONDA NSR50
- HONDA NSR80
It is for NSR 50, but it can be installed with KIJIMA 's Plating Tie Wrap to N - Craft' s NSR Linkless Type Swingarm Monoshock Triple Square with Stabilizer 0 cm Long.Be careful as it will int...Read More - Fits:
- HONDA CBR250RR (MC22) 90-
Fender about OEM's Battery cover In rainy day Seat Back and underbody were dirty so it looked good for mudguard so I bought it.Since it interferes with Chain as it is, it will not interfere if the...Read More - Fits:
- HONDA VTR250 98- (MC33)
【What made you decide the purchase?】 Cool Design【How was it actually used?】 Rear suspension - Dirt on the back of Rear has been reduced.【Was it difficult to install? (Hard parts case)】 It is a little ...Read More - Fits:
- HONDA VTR250 98- (MC33)
- HONDA VTR250 98- (MC33)
Installation is simple. Remove the original Guard and stop Brake hose If you also remove Screw, just put on it. Easy to remove.The appearance is cool, and the dirt under Seat has also been improved so...Read More - Fits:
- HONDA CBR250R 11-
As for what I care about with Rear Fender of STD Shape, it is a joint with Swingarm. The feeling of taking - - -.Arm itself is a corner Pipe after all, so I can not do anything to be poor, but if I at...Read More - Fits:
- HONDA NSR80
- HONDA NSR50
- HONDA NSR50
- HONDA NSR80
I decided to installed this part by looking at customer reviews. About the part finishing; the surface of inner portion, hitting the arm, was really rough, so I filed it to make smoother. Moreover, ...Read More - Fits:
- HONDA NSR80
- HONDA NSR50
- HONDA NSR50
- HONDA NSR80
I installed it to my APE100 although this is for NSR50/80 originally. I have the OEM fender but it'll be removed and I wanted to prevent dirt to the shock portion, so I decided to install this rear f...Read More - Fits:
- KAWASAKI NINJA1000 (Z1000SX)
It is used for Ninja1000.
attachment does not have the necessity for processing, either and was attached simply.
Dirt of after [ attachment ] of a sheet flesh side also decreases, and appearance al...Read More - Fits:
- KAWASAKI NINJA1000 (Z1000SX)
Ninja1000 is equipped.
It became somewhat longer than a pure Fender, and appearance also became stylish touch.
Although the Clearance in particular of attachment was also satisfactory, a Rear brake ...Read More - Fits:
- KAWASAKI NINJA1000 (Z1000SX)
[Webike Monitor] Although it wavered with the product made from a Striker at the beginning, , cheap a little but, and since the Lowdown was carried out, it decided here the point more than in which ...Read More
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING