39 Reviews View type:
I machined a lot of the suspension to install it. It took a long time and was hard work,
but I was very satisfied after installing this.
Because the performance came out as I hoped.
The motorcycle is...Read More- Since the suspension is originally soft, we installed it without orifice and pre-road as it is.Cushioning has increased considerably when driving the OffRoad course.Even in the case of a series of sma...Read More
- Fits:
- KAWASAKI Z250SL 14-17
- KAWASAKI NINJA2 Helmet50RSL 15-16
Ninja250SL/The OEMFork of the Z250SL is not the most comfortable to ride on the street, as it is soft and has a thrust to it that comes back to you during cornering. Still, the light weight of the veh...Read More - Fits:
- KAWASAKI Z250SL 14-17
- KAWASAKI NINJA2 Helmet50RSL 15-16
I was interested in the PD Valve because the OEMFork of the Z250SL is too soft and it comes back undulating during cornering, but I was hesitant because orifice machining and cutting of the color seem...Read More - Fits:
- YAMAHA NMAX 155 15-21
The shape of the Initial Adjuster is completely different from the picture, and there is no Level for adjustment, so it was difficult to adjust.In the photo, there is a Level line with Plus screw. In ...Read More - Fits:
- SUZUKI GSX-R150 17-
Purchased for GSX-R125Circuit Running.The rear suspension was too stiff and didn't stoke at all, so I replaced it with a YSS kit.Although I haven't run it yet, I can see the change just from the feeli...Read More - Fits:
- YAMAHA SR400 FI
I installed it on SR400.The F suspension of SR400 sinks down at once when FBrake is applied strongly.Control was low and there was a fear that the bottom might fall out.I thought about changing the oi...Read More - I changed the spring to a DRC spring to get rid of the OEM's soft, uncontrolled, sloppy legs, butIt's a bit easier to apply the load than before, but it's still floppy due to the lack of pressure side...Read More
- Fits:
- HONDA SUPER CUB 110i 14-17
It's a bit expensive for CUB Parts, but I installed it on my JA44.With the disc brake, it has been converted to FFork of WAVE, but the end cap is the structure which is held with C-ring, and the inner...Read More - Fits:
- SUZUKI GSX-R150 17-
Basically, I agree with kamayan27, and I'll limit myself to talking about it in Race use.Brake initial behavior is good, which cannot be handled by changing oil viscosity or oil level.The lack of spri...Read More - Wearing a NINJA400 (2020, 2BL-EX400G), POSH Used in conjunction with Initial AdjusterType2When I put the PD Fork Valve on the NINJA2 Helmet 50SL, the thrust is reduced and the valve is not as strong a...Read More
- Fits:
- YAMAHA NMAX 155 15-21
The ride quality is much better than the ride without damping force of NORMAL, it's a big difference!Installation is done in the Instruction Manual (mine is the English version) and The content was di...Read More - Fits:
- HONDA REBEL500
Installed on REBEL250Before the exchange, it was bouncing and undulating at Corner, and Front at the last second to stop at the light I'm going to pull it out or something, and while I don't feel any ...Read More - It is used in Z400GPIt is used in conjunction with the external product Fork Spring, which is in the genus With Spring The free length can be secured without processing in combinationThe feeling of us...Read More
- Fits:
- HONDA PCX150 18-20
PCXFront fork still has no goods at allSo I installed it as a new product from YSS, although it's only for SpringTo be honest, I think the recoil is still a nice touch, but I have no idea what it look...Read More - Fits:
- HONDA REBEL500
When entering a corner, the Brake is slowed down by the fluffy Normal fork with a soft Caphica I introduced the Kit as soon as it was sold because I sometimes find it difficult to ride itIf you have u...Read More - Fits:
- SUZUKI GSX-R150 17-
First of all, we are installing it on the 125, not the GSX-R150 This is an in-play on thatGSX-R125 has a thin Fork, and if you focus on the stiffness of the Front It's just not dependableIt may be unn...Read More - Fits:
- SUZUKI GSX-R150 17-
I was a little concerned about the viscosity of the recommended Oil, but I installed it and drove it, and it was Big LiIn NORMAL, I'm even considering introducing something like Steering damper or Stu...Read More - The oil viscosity is the same, but the oil surface is the same as the OEM standardIn the instruction manual of the English version, there are instructions to drill a hole in the piston rod Translation...Read More
- The current PD Valve does not require processing of DamperROD and the installation itself is fine, but the initial operation within legal speed hanghang.So, I am witnessing by adding holes in the init...Read More
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING