- Fits:
- MONTESA Cota 4RT
- MONTESA 4RIDE
- HONDA HRC RTL-F.RTL300R
Very specialized product for Montesa 250 clutch. The product is very well done and fits perfectely in the cluth. Delivery was fast and accurate,Read More - Used for plate Screw with OEMFront master cylinder cap.I thought about replacing it with a stainless bolt, but I was worried about the electrical corrosion of the aluminum cylinder, so I decided to go...Read More
- Fits:
- YAMAHA YZ125X 16-23
- YAMAHA SRX600
- YAMAHA TZR250R 3XV
- YAMAHA TT250R
- YAMAHA SRX400
- ...and more.
Purchased because it improves Clutch cutting.The Clutch is stable and cuts at the same position as the previous reputation.The points connected to all clutch grip sides can now be adjusted.Easier to o...Read More - Fits:
- YAMAHA YZ125X 16-23
- YAMAHA SRX600
- YAMAHA TZR250R 3XV
- YAMAHA TT250R
- YAMAHA SRX400
- ...and more.
I assembled it with two washers, and the lever felt light and easy to grip. The connection and the breakage of the wire is so tight that it is hard to believe how different it is from the other two. I...Read More - Fits:
- YAMAHA YZ125X 16-23
- YAMAHA SRX600
- YAMAHA TZR250R 3XV
- YAMAHA TT250R
- YAMAHA SRX400
- ...and more.
It was a little weird to remove the rear brake, but after that, it was easy to replace it.Read More - Fits:
- YAMAHA YZ125X 16-23
- YAMAHA SRX600
- YAMAHA TZR250R 3XV
- YAMAHA TT250R
- YAMAHA SRX400
- ...and more.
Clutch operation has been lightened. The position of the half-clutch is easy to find and convenient for long tours without tiring.Read More - Fits:
- HONDA Rebel300
- HONDA CB300R
- HONDA CRF250L -20 *Not available after 21 years
- HONDA CRF250M -20
- HONDA CRF250RALLY -20 *Not available after 21 years
- ...and more.
真的很贵,只是一个螺母螺丝还有垫片,就卖到了上百的价格,也许是平摊开模的费用吧,但是已经换了305CC的SP武川扩缸套件,必须要加强。
共有5个螺母、5个螺丝、10个垫片,每个螺丝搭配1个螺母和2个垫片使用。目前很少骑,期待后面的长途测试后的反馈,虽然装上看不见,但是很漂亮的红色。
Really expensive, just a nut screw and gasket, it is s...Read More - Fits:
- HONDA CB250F 15-17
- HONDA CB250R 18-19
- HONDA CBR250R 11-17
- HONDA CRF250L 13-19
- HONDA CRF250M 13-17
- ...and more.
The Clutch connection will be a sputtering connection.You won't have that wobbly feeling when the OEM is half-clutching.Read More - Fits:
- HONDA HORNET250
- HONDA JADE
- HONDA CBR250RR MC22
- HONDA CBR250 MC14.17.19.22
- HONDA CBR250FOUR MC14
- ...and more.
It was hard to get it into Neutral, but by replacing it, I was able to get it in easily.If the connection surface is old when removing the cover, powder will come out and get into the engine, so it ma...Read More - Fits:
- YAMAHA YZ125X 16-23
- YAMAHA SRX600
- YAMAHA TZR250R 3XV
- YAMAHA TT250R
- YAMAHA SRX400
- ...and more.
To be honest, I didn't put much faith in these custom parts, but I found the product to be very effective. First of all, it made it easier to drive willy. I used to have a hard time getting the front ...Read More - Fits:
- YAMAHA SEROW225
- YAMAHA TW200
- YAMAHA TW225
[How is it used?Installed on SEROW225 which is used for forest road play.Recently, I had a strange feeling about the connection of the clutch and decided to replace the clutch. If you want to replace ...Read More - Fits:
- YAMAHA SEROW225
- YAMAHA TW200
- YAMAHA TW225
Used for SEROW225.It changes the way Clutch is connected.It's like the vague connection is connected to Span.The number of Washer was set to two at first, but it is not possible to set it to Quantity....Read More - Fits:
- YAMAHA WR450F
- YAMAHA SR500
- YAMAHA YZ450F
- YAMAHA YZ250
- YAMAHA YZ250X
- ...and more.
[How is it used?Was the one you received as per Image?The product and Quality was exactly what I expected.Was the installation difficult?It's not difficult if you have a Kill. If you follow the Manual...Read More - Fits:
- HONDA HONDA genuine lifter plate 22361-437-000 Model used
- HONDA XR230
- HONDA XL200R
- HONDA XL125R
- HONDA TLR200
- ...and more.
[How is it used?I decided to buy this product when I heard that this product would be released from Kobo Kitamura with the same Timing as the change to Reinforced Clutch for xr230.Was the one you rece...Read More - Fits:
- YAMAHA YZ125X 16-23
- YAMAHA SRX600
- YAMAHA TZR250R 3XV
- YAMAHA TT250R
- YAMAHA SRX400
- ...and more.
[How is it used?Installed in the family vehicleWas the one you received as per Image?No problem.Was the installation difficult?I asked the shop to do it for me.How was your experience with it?It may h...Read More - Fits:
- YAMAHA WR450F
- YAMAHA SR500
- YAMAHA YZ450F
- YAMAHA YZ250
- YAMAHA YZ250X
- ...and more.
I was wondering if I could do something about my carburetorSR clutch which is said to be heavy, and found this.It is MAJOR to put in the clutch spring of the fI car, but because my SR is tuned so much...Read More - Fits:
- HONDA Rebel300
- HONDA CB300R
- HONDA CRF250L -20 *Not available after 21 years
- HONDA CRF250M -20
- HONDA CRF250RALLY -20 *Not available after 21 years
- ...and more.
Used on a '14 MC41 CBR250RSecond Type Model.This product is designed to improve the stability of the spring by replacing the bolt washer that holds the clutch spring, and to improve the direct feeling...Read More - Fits:
- YAMAHA WR450F
- YAMAHA SR500
- YAMAHA YZ450F
- YAMAHA YZ250
- YAMAHA YZ250X
- ...and more.
I bought a Clutch spring retainer from Koubou Kitamura.Yamaha's RZ250R also fits, so I installed it.When I held the Clutch lever, it was very smooth.When I dropped the GEAR by one step while driving, ...Read More - Fits:
- YAMAHA YZ125X 16-23
- YAMAHA SRX600
- YAMAHA TZR250R 3XV
- YAMAHA TT250R
- YAMAHA SRX400
- ...and more.
Was the one you received as per Image? It came in a rather small bag, with no instructions.Was the installation difficult? I didn't want to tlove it later, so I had a Motorcycle shop replace the Gaske...Read More - Fits:
- YAMAHA YZ125X 16-23
- YAMAHA SRX600
- YAMAHA TZR250R 3XV
- YAMAHA TT250R
- YAMAHA SRX400
- ...and more.
Even for a beginner, it's easy to put on, looks good quality, and I'm looking forward to driving it!Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING