- Fits:
- HONDA Trail125 21-
- HONDA CT125 20-21 Applicable model:JA55
Ordered for ct 125, prefered zeta brand to be fitted on supercub 125 but too bad they dont make for supercub, so i had it modified. It looks good...Read More - Fits:
- HONDA CRF250L 12-18
I was quite disappointed that it weighs practically the same as the factory one. I have to clarify that I bought the optional part so that it had the same height as the original one. Regarding the f...Read More - Fits:
- HONDA CRF250 RALLY 17-20
The parking lot of the house is slightly tilted.The installation of an Aluminum Rear box.Due to the above two points, there was a concern that the product would topple over to the Right Side when park...Read More - CRF250RALLY5019StandardBy MOTARDizationI could get rid of my standing position!I'm glad I bought itRead More
- I wanted to shorten the STAND because it was too lowdown and lost its tilt, so I installed this -25mm one.It was a very good thing with a reassuring inclination.Read More
- Fits:
- YAMAHA WR250R 08-17
- YAMAHA WR250X 08-17
I am using XWheel to make MOTARD, but the OEM length of X is a little too long for my vehicle, so I have replaced it with a +15mm tip.It's not that much lighter than OEM, but it looks better, so it's ...Read More - Fits:
- HONDA CRF250 RALLY 17-20
Not RALLY50StandardLDOnly the LINK is installed in the replacement car, 2cm down, and the seat is removed 4cm.Front fork2.4cm stickerWith the above Spec.The body is leaning a little too much, but BMWs...Read More - Fits:
- YAMAHA Cerro 250 05-21
Since I raised the height of the car, I was worried that the motorcycle would fall over because of the large tilt when it was parked, and I was also worried that it would take up too much space in the...Read More - Fits:
- KAWASAKI KLX230R 20-23
- KAWASAKI KLX250 98-20
- KAWASAKI KLX150BF 16-18
- KAWASAKI KLX230 20-22
- KAWASAKI KLX230 S 22
- ...and more.
The product is exactly as you see it.My KLX125 is Lifted up and wearing LongSTAND.Wearing this product will also increase the STAND length by 6mm.(About 6mm at the most Large of the Nut part that came...Read More - Fits:
- YAMAHA WR250R 08-17
- YAMAHA WR250X 08-17
The ground contact part of the STAND can be rotated and fixed, so you can set the best STAND ground contact position according to your motorcycle's parking position. I'm happy with the way it looks.Read More - Fits:
- HONDA Trail125 21-
- HONDA CT125 20-21 Applicable model:JA55
I bought this to increase the stability of the OEMSTAND because I was worried that the ground surface was too small.There are cheaper products made by Large land in other NetShop, but I think this pro...Read More - Fits:
- HONDA Trail125 21-
- HONDA CT125 20-21 Applicable model:JA55
When I loaded the bike with luggage, it became unstable when I put Side Stand on it, but by putting this geta on it, the stability increased a lot. Because the ground contact area becomes wide, there ...Read More - Fits:
- YAMAHA Cerro 250 05-21
I decided to replace it to help with light weight. But I couldn't fit it because I needed a T-socket wrench. It looks like it's about 1cm lower than the original product. I think it's just right to en...Read More - Fits:
- HONDA CRF250 RALLY 17-20
May not be right
I was worried, but it’s not
It's well-sized and more inclined, so my precious bike doesn't fall over. And
It is easy to raise the stand even when ridingRead More - Fits:
- YAMAHA WR250R 08-17
- YAMAHA WR250X 08-17
If you are looking for a lighter, non-rusting adjustable side stand then this is it. It looks good too which is possibly one of the real factors I've taken into account for the purchase. It also accep...Read More - Fits:
- KAWASAKI KLX230 20-21
I'm wearing a beet Lowdown Link in terms of leg length.It's 25mm shorter than the standard STAND, so it's easier to get over the motorcycle when STAND is applied.You can also expect a slight weight re...Read More - Fits:
- YAMAHA YZ125X 17-22
- YAMAHA YZ250X 16-22
- YAMAHA YZ250FX 15-19
- YAMAHA YZ450FX 16-18
- YAMAHA WR250F 07-19
- ...and more.
When the WR250F was converted to MOTARD, the ride height was slightly lowered, almost like a vertical I bought it to make it tilt as it isThe result is a standard tilt, and it doesn't feel too much of...Read More - Fits:
- HONDA CRF250 RALLY 17-20
The hardest thing I had to do when I bought my HONDA CRF250Rally was Side Stand Height. It was Not so much on rough roads, but on public roads and on road inclination when parking, I was very careful....Read More - Fits:
- YAMAHA WR250R 08-17
- YAMAHA WR250X 08-17
Installed on WR250RLower the lower part of the rear shock and adjust the spring position At -25mm, it tilts quite a bit at -25mm, both front and back are DRCSpringSoft..Apparently, replacing it with Z...Read More - Fits:
- YAMAHA WR250R 08-17
- YAMAHA WR250X 08-17
Really a nice addition. As soon as I saw this product I was excited and hoped it performed as good as it looked. It does. The fit was very good, it works smooth and uses the stock bolt, sidestand swit...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING