(0)
(0)48 Reviews View type:
- Fits:
- HONDA ADV150 All KF38 models
I bought this because it was hard to get the Helmet into the compartment under the Seat.Installation is easyBecause of the low mounting position, the Helmet is closer to the ground.Read More - Fits:
- Others Installed Handlebar Diameter:φ22.2Pipe Handlebar
Mirror mounting hole:M10 Standard Thread Screw Universal
On all the Motorcycles I've ridden recently, I've always put a Helmet holder in this position.So I bought and installed it on the for GPZ900R again.The CB400SB was the same, but with a motorcycle with...Read More - Others Installed Handlebar Diameter:φ22.2Pipe Handlebar
- Fits:
- YAMAHA NMAX (SE86J) 2DS2
- YAMAHA NMAX (SED6J) BV35
- YAMAHA NMAX 155 (SG50J) BV43
Basically, I put the Helmet under the Seat, but if you go shopping or something, this holder is very useful.It was easy to installIt may not be a good idea to leave the Helmet attached to the Holder.Read More - Fits:
- Others Universal
I was able to easily install and remove it from both the Jet and AGB Full face types of Bell and AGB with one touch. Apart from being a bit heavy, it's well worth buying.Read More - Fits:
- HONDA ADV150 All KF38 models
It is easy to install and fits perfectly because it is only for ADV150This motorcycle has a small Helmet in, so it's hard to store the Helmet since things tend to happenThe Helmet holder is very usefu...Read More - Fits:
- SUZUKI GSX-R125 (DL33B All models)
- SUZUKI GSX-S125 (DL32B All models)
The helmet holder is in the Rear Sets, but to be honest, it is difficult to use, so I bought it It wasIt takes a little bit of effort to support it because it is sandwiched between the Frame and Tande...Read More - Fits:
- SUZUKI GSX250R 17-21 lc6dn11az all models
In the GSX250R and NINJA, you can remove the Tandem seat and use the Seat lock It's a way of securing a helmetIn Touring and so on, you can't use it if you put a Back on it, it's going to be a Large w...Read More - Matching CB250R for printing (MC52) is the CBR205RR in the photo (MC51) You will see and feel uneasyI don't know how it feels to install it as I haven't installed it yet, but it will be installed as p...Read More
- Fits:
- YAMAHA YZF-R25 1DW2
- YAMAHA YZF-R3
The Helmet holder on the back of the OEM Seat is completely uselessI'd love to see this one adopted as an OEMIt opens from the top when you unlock itNot applicable, but I have it on my MT-03Read More - Fits:
- HONDA CB125R JC79 (all models)
- HONDA CB250R MC52(all models)
- HONDA CBR125R JC50 (all models)
- HONDA CT125CT110 HUNTER CUB JA55 (all models)
- HONDA PCX125 JF28(all models)
- ...and more.
I'm using it on my MONKEY125 (OEM is too deep because it's assumed to use auxiliary wire)Clutch lever attached to the side, because the Handlebar Lock cuts to Left It's a hindrance, but it's also a ha...Read More - Fits:
- SUZUKI GSX-R125 (DL33B All models)
- SUZUKI GSX-S125 (DL32B All models)
This product uses two bolts which are holding the tandem seat footrest. These bolts are really stubborn so you might need some equipment for that. And if you once loosen them you better use some Threa...Read More - Fits:
- Others Installed Handlebar Diameter:φ22.2Pipe Handlebar
Mirror mounting hole:M10 Standard Thread Screw Universal
The position of the Mirror Holder changes when replacing the Master Cylinder I bought it because I've been using the same type of Helmet holder for a while now I used to use a helmet holder of the sam...Read More - Others Installed Handlebar Diameter:φ22.2Pipe Handlebar
- It is better not to interfere with footpeg because the position where Helmet is applied is behind.It does not get in the way even when used in conjunction with Tandem Footpeg.The place where Bracket c...Read More
- There are options of KITACO, KIJIMA, Babyface and 3 Manufacturer place, but I think that there is no difference in function. So, what will you choose as a standard? Although this 3Manufacturer install...Read More
- Fits:
- HONDA CB125R JC79 (all models)
- HONDA CB250R MC52(all models)
- HONDA CBR125R JC50 (all models)
- HONDA CT125CT110 HUNTER CUB JA55 (all models)
- HONDA PCX125 JF28(all models)
- ...and more.
经常来Webike买东西，商品多，头盔锁也多，但我还是首选了我最喜欢的KITACO。这个头盔锁同样没有让我失望，整体做工很扎实，这个金色不会显得老土，而且关键头盔锁不仅仅可以锁头盔，还可以锁其他贵重物品！赞！
I often come to Webike to buy things, there are many goods, and there are many helmet locks, b...Read More - Fits:
- YAMAHA NMAX (SE86J) 2DS2
- YAMAHA NMAX (SED6J) BV35
- YAMAHA NMAX 155 (SG50J) BV43
Since I can not fit Helmet under Seat, I bought it. Although I thought after installing, I think that it is weak for the theft or mischief because it is a structure that can be easily removed from Scr...Read More - Fits:
- YAMAHA YZF-R25 1DW2
- YAMAHA YZF-R3
Installation etc etc. There is not a difficult point every.About a year after starting to use, I feel that deterioration of the Black part due to sunburn is a little early. Waxetc. I should have paint...Read More - Fits:
- HONDA CB125R JC79 (all models)
- HONDA CB250R MC52(all models)
- HONDA CBR125R JC50 (all models)
- HONDA CT125CT110 HUNTER CUB JA55 (all models)
- HONDA PCX125 JF28(all models)
- ...and more.
The OEMHelmet holder is equipped in the Left Side under the Seat, but I wanted to relocate this around the Handlebar and purchased this product.1) Since OEMBolt of XT250X can not be used, we also prep...Read More - Fits:
- HONDA CB125R JC79 (all models)
- HONDA CB250R MC52(all models)
- HONDA CBR125R JC50 (all models)
- HONDA CT125CT110 HUNTER CUB JA55 (all models)
- HONDA PCX125 JF28(all models)
- ...and more.
First buy in webike, there is many helmet lock in webike, i choose kitaco since it has color and it is a japan famous brand in motocycle, it is very beautiful when i receive it, and it is very useful....Read More
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING