- Fits:
- YAMAHA
- YAMAHA XMAX250BG6 domestic specification 18-21
- YAMAHA XMAX300B74 Australia specifications 17-
- YAMAHA XMAX300B74 UK specifications 17-
- YAMAHA XMAX300B74 European specifications 17-
- ...and more.
我是第二次购买KN Planning 碳纤维花纹后土除,之前买的是NMAX155的版本,使用效果非常不错。这款后土除安装比较复杂一点,需要拆除排气和后刹车卡钳才能安装,如果没有动手能力最好去专业的车行进行安装,安装完效果还是不错的,可以避免泥水甩到发动机。Read More - Fits:
- YAMAHA Cygnus X Type 1 [5UA] Domestic
- [5TY] Taiwan
- YAMAHA BW'S 125 [5S9] Taiwan
- YAMAHA Cygnus X Type 2 [28S] Domestic
- [4C6
- ...and more.
CYGNUS X (Taiwan Type 2 se44jEngine) It is used forSince CYGNUS is made with OEM Mounting Tire of 120/70-12 and Tire house of Clearance of Limit, the Tire size of 120/80-12 of BT601 or tt93gpetc. will...Read More - Fits:
- YAMAHA Cygnus X Type 3 Domestic specifications [1YP].
- YAMAHA Cygnus X Type 3 Taiwan specifications [1MS].
- YAMAHA Cygnus X Type 2 Domestic specification [28S].
- YAMAHA Cygnus X Type 2 Taiwan specifications [4C6
- 1CJ].
- ...and more.
It required some modification of the mounting area and a bit of brute force, but I was able to get the Michelin Power pure [120/70-12] I was not able to get any interference with the Tire on the With ...Read More - Fits:
- YAMAHA
- YAMAHA XMAX250BG6 domestic specification 18-21
- YAMAHA XMAX300B74 Australia specifications 17-
- YAMAHA XMAX300B74 UK specifications 17-
- YAMAHA XMAX300B74 European specifications 17-
- ...and more.
XMAX does not have a rear fender, so I installed it as a countermeasure against mud splash. I spent a lot of time to install it while looking at the installation information on Net.After installation,...Read More - Fits:
- YAMAHA
- YAMAHA XMAX250BG6 domestic specification 18-21
- YAMAHA XMAX300B74 Australia specifications 17-
- YAMAHA XMAX300B74 UK specifications 17-
- YAMAHA XMAX300B74 European specifications 17-
- ...and more.
I've been looking for an Inner fender because I'm concerned about a lot of mud splashing under the Trunk.There was no setting for TRICITY300.So I installed this inexpensive one for XMAX on my TRICITY ...Read More - Fits:
- YAMAHA CYGNUS X Type 5 Taiwanese specification (BJ2)
- YAMAHA CYGNUS X Model 5 Domestic (B8S)
- YAMAHA CYGNUS X Model 4 domestic specification (BF9)
- YAMAHA CYGNUS X Type 4 Taiwanese version (2UB)
- YAMAHA BW'S R Type 2 Taiwan specification (2JS)
- ...and more.
I replaced the ugly OEMRear Fender with the Fender Eliminator.Looks like Refreshing.The mud splatter is a charm.Read More - Fits:
- YAMAHA
- YAMAHA
- YAMAHA
我的摩托是YAMAHA NMAX155,我在webike上购买了这款KN后挡泥板,NMAX155原车是不带后挡泥板的,雨天或者路面湿滑的情况会甩泥很脏,有了这款挡泥板好太多了,挡泥板的外观是仿碳纤维的非常的帅,webike购物发货快体验不错。
----------------------------------------------
My motorcycle is YAMAHA N...Read More - Fits:
- YAMAHA
- YAMAHA
- YAMAHA
I installed it on BirdCity155, which is BlueCoreENG, which is common with N-MAX. I cut the rear fender so that I can replace the rear suspension. I've installed it, for Replacement 20mmBolt is not inc...Read More - Fits:
- YAMAHA
- YAMAHA XMAX250BG6 domestic specification 18-21
- YAMAHA XMAX300B74 Australia specifications 17-
- YAMAHA XMAX300B74 UK specifications 17-
- YAMAHA XMAX300B74 European specifications 17-
- ...and more.
i didn't have a mudguard on the back of my xmax so I found this and decided to buy itUnpretentious Material:It looks like an OEM product because it is Carbon StyleThe product needs some work, but it's...Read More - Fits:
- SUZUKI ADDRESSV125 CF46A [K5/K6]
- SUZUKI ADDRESSV125G CF46A [K5/K6]
- SUZUKI ADDRESSV125 CF46A [K7/K9]
- SUZUKI ADDRESSV125G CF46A [K7/K9]
- SUZUKI ADDRESSV125G LIMITED CF46A [K7/K9]
- ...and more.
Заказываю уже второе крыло, первое разбилось в дтп, к качеству нет претензий. Важно от грязи не защищает, не получится снять заводское крыло и поставить это.
I am ordering the second wing, the firs...Read More - Fits:
- YAMAHA
- YAMAHA
- YAMAHA
The construction is solid Installation accuracy is also good, Bolt1 pc fixation seems to be no problemInstallation is also Air cleaner's BoltQuantity:I only had to remove 2pc and managed to get it in ...Read More - Fits:
- YAMAHA
- YAMAHA
- YAMAHA
Because it is a single Screw, do not stick straight.I am slightly bent..However, the function has been properly rolled off and the dirt near the Air cleaner has become less.Read More - Fits:
- YAMAHA
- YAMAHA
- YAMAHA
There is neither instruction manual nor installation Instruction Manual.I did not arrive straight because it was a Bolt 1 pc stop.It is shorter than expected, and the effect may be low.It's not to...Read More - Fits:
- YAMAHA
- YAMAHA
- YAMAHA
I heard that under the Fender is soiled well, while the body is still newI thought that would be installed.For installation, remove Cover of Air cleanerI forced it in a form that it was pressed in..It...Read More - Fits:
- YAMAHA Cygnus X (Type 5) Taiwan specification [B2J] 2 sets required
- YAMAHA Cygnus X (Model 5) Domestic specification [B8S] 2 sets required
- YAMAHA Cygnus X (Type 4) Taiwan specification [2UB] 2 sets required
- YAMAHA Cygnus X (Model 4) Domestic specs [BF9] 2 sets required
- YAMAHA Cygnus X (Type 3) Taiwan specifications [1MS].
- ...and more.
Since Fender is White, I think that a slightly darker color will be conspicuous, but I am unifying AnodizedParts with Basic Gold, so I chose Gold this time. Installation is simple as it removes OEMBol...Read More - Fits:
- YAMAHA
- YAMAHA
- YAMAHA
I was disappointed that there was no documentation
No instructions were needed.
Very easy mounting and perfect fitting impressed me.
Recommended!Read More - Fits:
- YAMAHA CYGNUS X Type 5 Taiwanese specification (BJ2)
- YAMAHA CYGNUS X Model 5 Domestic (B8S)
- YAMAHA CYGNUS X Model 4 domestic specification (BF9)
- YAMAHA CYGNUS X Type 4 Taiwanese version (2UB)
- YAMAHA BW'S R Type 2 Taiwan specification (2JS)
- ...and more.
The portion to fix with Screw is Gap and processing was necessary. Moreover, the finishing of each part was not so beautiful, and extra work such as taking BALI was necessary. Also, as I knew this, I ...Read More - Fits:
- YAMAHA
- YAMAHA
My bike looks gorgeous with this rear fender & mesh seat cover fix. The seat is much comfortable. The rear look is awesome.Read More - Fits:
- YAMAHA SMAX Taiwan specifications
- YAMAHA Majesty S Japan specifications
First time purchase item from Webike. Delivery arrived earlier than expected. Self fixed without difficulty. Satisfied with product.Read More - Fits:
- YAMAHA
- YAMAHA
Look good with silver chrome design. Enhance the bike appearance. It fits snugly and well. I will recommended all to buy. Thanks!Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING