- I started with a new project that I have not tried before, a Monkey bike. There were a lot of parts that were needed and I started with the most obvious ones. The exhaust was hanging off and was not g...Read More
- As I was starting a new project on a bike I have never worked on this is a bit of an experiment of mine. The bike was in a lot of bits and basically a rolling chassis with lots of boxes with parts ins...Read More
- Fits:
- YAMAHA FJR1300 A Number of uses X4
- YAMAHA FJR1300 AS Number of uses X4
- YAMAHA FZ1 -N 2D1A Number of uses X4
- YAMAHA FZ1 S Number of uses X4
- YAMAHA FZ1FAZER S3C3G Number of uses X4
- ...and more.
cheap and high quality.Excellent functional product. There is nothing complicated about it.Would recommend! Fast shipping as always too.Read More - Fits:
- HONDA AX-1 All models used X1
- HONDA CB1000 SF (Big One) T2 All models used X4
- HONDA CB1000 SF (Big One) All models used X4
- HONDA CB1100 SC65 All models used X4
- HONDA CB1100 EX SC65 All models used X4
- ...and more.
Fits perfectly on my CB1000SF '94, I am not yet sure though if it's really a one-time use as advertised. Nevertheless, product is great.Read More - Fits:
- HONDA DJ-1-RR 88 SE50MSJ AF19-1000013-
- HONDA G' 89- SU50MK AF23-1000001-
- HONDA CABINA 50 94 SCX50R AF33-1000001-
- HONDA CROSS CUB 50 18-22 C50XJ/XL/XN AA06-1000001-
- HONDA JULIO 98- NTS50W/X/Y AF52-1000001-
- ...and more.
About quality and texture, I can confirm that the quality is great and that the material used is a metal gasket that deforms when pressure is applied to seal between the cylinder head and the exhaust ...Read More - Fits:
- YAMAHA NMAX
- YAMAHA NMAX 155
- YAMAHA BirdCity
- YAMAHA BirdCity 155
- YAMAHA NMAX155
- ...and more.
我的摩托车是YAMAHA NMAX155,按照摩托车保养说明书每次拆卸排气都需要更换消音器垫片,消声器垫片是保养和维修的必备品。它是不能重复使用的易损件。反复使用可能会造成排气泄漏,使系统无法发挥其预期功能。KITACO垫片价格比原厂垫片价格便宜,性能完全一致。Read More - Fits:
- HONDA DJ-1-RR 88 SE50MSJ AF19-1000013-
- HONDA G' 89- SU50MK AF23-1000001-
- HONDA CABINA 50 94 SCX50R AF33-1000001-
- HONDA CROSS CUB 50 18-22 C50XJ/XL/XN AA06-1000001-
- HONDA JULIO 98- NTS50W/X/Y AF52-1000001-
- ...and more.
About quality and texture: I am happy with the quality of the exhaust system gasket from Kitaco. A compressing gasket with an external diameter of 32mm and an internal diameter of 26mm.
About the fee...Read More - Fits:
- HONDA CD50 79-92 CD50Z/E/F/H/N [FNo]CD50-1300001 to 1904169 [Number of use]1
- HONDA CD50 93-98 CD50P/S/W [FNo]CD50-2000001 or later [Number of use]1
- HONDA CD90 80- CD90A/H/N [FNo]HA03-1000003 to 1303689 [Number of use]1
- HONDA CD90 93-98 CD90P/S/W [FNo]HA03-1400001 or later [Number of use]1
- HONDA CRF50F 04- CRF50F4/5/6/7/8/9/A/B/C [FNo]AE03-1400001 or later [Number of use]1
- ...and more.
Приобретал для замены глушителя на Honda Monkey. Все отлично подошло, качество превосходное, в чем я и не сомневался. Как всегда к продукции KITACO претензий нет!
Purchased to replace a muffler on a ...Read More - Fits:
- HONDA CB50 S All models used X1
- HONDA CB50 All models used X1
- HONDA CBR250F All MC14 models used X4
- HONDA CBX125 F All models used X2
- HONDA CBX125 Custom All models used X2
- ...and more.
About quality and texture Kitaco products are reliable enough
About the feeling of use There is no difference from the standard and I recommend two because they are one set
Products to buy together ...Read More - Fits:
- HONDA AX-1 All models used X1
- HONDA CB1000 SF (Big One) T2 All models used X4
- HONDA CB1000 SF (Big One) All models used X4
- HONDA CB1100 SC65 All models used X4
- HONDA CB1100 EX SC65 All models used X4
- ...and more.
I ordered them with Wyvern 4in4 exhaust. They are not so expensive as the original Honda parts.
They work fine and price is good.Read More - Fits:
- YAMAHA YZF-R3
- YAMAHA BRONCO All years
- used number of times X1 Used(one place before silencer)
- YAMAHA XG250 TRICKER 5XT1-7 Number of uses X1 (1 spot before the silencer)
- YAMAHA XG250 TRICKER (FI MODEL) 5XT8-9 Number of Uses X 1 (1 place before silencer)
- ...and more.
It's the same as the genuine product & it's so cheap. product quality is awesome I replaced the gasket with exhaust maintenance of TW200 . This is the gasket on the silencer side. It takes a little ti...Read More - Fits:
- KAWASAKI NINJAZX-25R SE ZX250E(ZX250E-A000001-)
- KAWASAKI NINJAZX-25R ZX250E(ZX250E-A000001-)
The KITACO product that was the least expensive was used. No problems and no exhaust leaks.Read More - Fits:
- HONDA AX-1 All models used X1
- HONDA CB1000 SF (Big One) T2 All models used X4
- HONDA CB1000 SF (Big One) All models used X4
- HONDA CB1100 SC65 All models used X4
- HONDA CB1100 EX SC65 All models used X4
- ...and more.
[How is it used?I bought this for Repair because it was getting old.When removing and installing the Exhaust System, do not use the previous one and replace it with a new one, or it may cause waste le...Read More - Fits:
- YAMAHA R1-Z All models used X2
- YAMAHA RZ250 R 29L Number of uses X2
- YAMAHA RZ250 R 51L Number of uses X2
- YAMAHA RZ250 RR 29L Number of uses X2
- YAMAHA RZ250 RR 51L Number of uses X2
- ...and more.
I used KITACO Gasket for R1-Z because the OEM one is quite expensive. I think the product itself is well made and good, especially for those who change the chamber from time to time.Read More - Fits:
- KAWASAKI ER-6n 12-14 Number of uses X2
- KAWASAKI Ninja 650 12-14 Number of uses X2
- KAWASAKI Z1000 (water-cooled) 10-21 Number of uses X4
- KAWASAKI ZRX400 All years ZR400 E Number of uses X4
- KAWASAKI ZRX400II All years ZR400 E Number of uses X4
- ...and more.
Whenever I replace the Exhaust System, I always use a new one. At that time, this is a cosmetically good choice.Read More - Fits:
- HONDA CB50 S All models used X1
- HONDA CB50 All models used X1
- HONDA CBR250F All MC14 models used X4
- HONDA CBX125 F All models used X2
- HONDA CBX125 Custom All models used X2
- ...and more.
Reliable manufacturer's product. No exhaust leaks, easy installation!I always use this product when servicing and replacing Gasket.Read More - Fits:
- HONDA 400X All NC47 models used X2
- HONDA CB-1 All models used X4
- HONDA CB400F (2013-) 13- All NC47 models Number used X2
- HONDA CB400FOUR (water-cooled) All NC36 models used X4
- HONDA CB400SF NC31 All models Number of uses X4
- ...and more.
As TitleIt works fineThe regular price is 550 yen including tax, so the WeBig is priced as is.Amazon sometimes sells them for around $400, so I guess it depends on Timing.I use CopperGrease to attach ...Read More - Fits:
- YAMAHA SR400 1JR Number of uses X1
- YAMAHA SR400 3HT1 Number of uses X1
- YAMAHA SR400 3HT1-9 Number of uses X1
- YAMAHA SR400 3HT9 Number of uses X1
- YAMAHA SR400 3HTA- Number of uses X1
- ...and more.
Quantity:1 Set of 2pcs. would be appreciated.Since the parts are invisible, the durability will be known much later.Read More - Fits:
- HONDA CRF250M MD38 All models used X1
- HONDA CRF250L MD38 All models used X1
- HONDA CBR250R 11- All MC41 models Number of uses X1
- HONDA CB250F All MC43 models used X1
It worked without any problems. Costa rica is the best.Read More - Fits:
- HONDA VT1300CX 10-12 ABS VT1300CXAA/CXAB/CXAC(SC61-1000001-)[location]R exhaust silencer front 1 place
- HONDA VTX1300 (SC52-)[Location of use] 1 silencer connection pipe part
- HONDA CRF450R 13 CRF450RD(PE05-2100001-)[location]1 location in front of the right side silencer
- HONDA Silver wing 400 01-03 FJS400 2/A3/D3(NF01-1000001-)[location]1 place in front of silencer
- HONDA CRF450R 14 CRF450RE(PE05-2200001-)[location]1 location in front of the right side silencer
- ...and more.
I have been using this product for a few years now and I am very pleased with the results.Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING