- Fits:
- YAMAHA MT-10 22
- YAMAHA MT-10 SP 22
- YAMAHA XSR900 22
- YAMAHA MT-09 SP 22 BAMJ (VIN number:RN69J-001875 or later)
장착이 정말 편하고 배선까지 깔끔하게 마무리가 됩니다
사외품보다 비싸지만 추가적인 버튼이 필요하지 않고 계기판에 직관적으로 표시가 되기 때문에 정말 편합니다
10단계 까지 조절이 가능하기때문에 적절하게 조절할수 있어서 만족감이 아주 좋습니다Read More - Fits:
- YAMAHA TMAX 08-12 (1UD2)*Wire lead (part number:Q5K-YSK-001-U50) is required for installation. /*Since the controller cannot be installed on the mirror boss
- install it on the handlebar cover or side panel. In that case
- it is necessary to drill a hole for the lead w
- YAMAHA TMAX 08-12 (1UD1)*Wire lead (part number:Q5K-YSK-001-U50) is required for installation. /*Since the controller cannot be installed on the mirror boss
- install it on the handlebar cover or side panel. In that case
- ...and more.
My motorcycle is YAMAHA XMAX300. The cold winter is coming. In this season, no matter how thick gloves you wear, you will feel cold in your fingers. I saw this YAMAHA original heating handle on webike...Read More - Fits:
- YAMAHA XMAX300
- YAMAHA XMAX ALL MODEL
The YAMAHA Performance PD puller is a great accessory to buy. This puller is complicated to install and requires a professional shop to install it. The actual experience was very good, with less vibra...Read More - Fits:
- YAMAHA NMAX155
- YAMAHA NMAX 16-
In winter riding, thick gloves are only half the job. The most important thing is to keep out the cold wind. This original YAMAHA hand guard is excellent for keeping out cold winds, exquisite workmans...Read More - Fits:
- YAMAHA NMAX155
- YAMAHA NMAX 16-
我的摩托车YAMAHA NMAX155,在寒冷的冬季无论手套多厚都不能抵挡冷风长时间的吹,手会感觉很冷,我在webike购买的这款YAMAHA原厂护工可以很好的把冷风挡住,让手部保持温度,原厂配件安装简便设计美观,很好用。Read More - Fits:
- YAMAHA NMAX155
- YAMAHA NMAX155
- YAMAHA NMAX
我的摩托是YAMAHA NMAX155,NMAX155这台摩托的刹车拉杆有一些硬,捏起来手感不好。我在webike上购买了这款原厂的刹车拉杆组,拉杆采用铝合金制作,具备可调节功能,可以根据自己的手型调节拉杆的握力。安装非常简便,只需要拆除一颗螺丝就能完美的安装。Read More - Fits:
- YAMAHA TMAX 08-12 (1UD2)*Wire lead (part number:Q5K-YSK-001-U50) is required for installation. /*Since the controller cannot be installed on the mirror boss
- install it on the handlebar cover or side panel. In that case
- it is necessary to drill a hole for the lead w
- YAMAHA TMAX 08-12 (1UD1)*Wire lead (part number:Q5K-YSK-001-U50) is required for installation. /*Since the controller cannot be installed on the mirror boss
- install it on the handlebar cover or side panel. In that case
- ...and more.
我的摩托是YAMAHA XMAX300,寒冷的冬季到来了。这个季节骑行不管戴多么厚的手套都会感觉手指寒冷。我在webike上看到这件YAMAHA原厂的加热手把,这件手把适合yamaha的各种车型,并且配备了原厂的电源接口。安装稍微有些麻烦需要拆除摩托上很多覆盖零件。Read More - Fits:
- YAMAHA XMAX300
- YAMAHA XMAX ALL MODEL
我所购买的AMAHA(雅马哈) Performance PD拉杆,这款拉杆安装比较复杂,需要去专业车行进行安装。安装后行驶了几百公里,实际体验非常不错,车身的震动减小,车身更加稳定,过弯支撑性也有所提高。总之物有所值。webike上购买价格也比国内便宜了很多。Read More - Fits:
- YAMAHA JOG remote control ZII
- YAMAHA JOG remote control ZR
- YAMAHA JOG remote control CV50
- YAMAHA Mateseries
- YAMAHA AXISTREET
- ...and more.
Parenthesis is bad, but the best protection against the cold is a Handlebar Cover.It is quite warm when used with the Grip heater.I am glad that it is easy to install and Reasonable.Read More - Fits:
- YAMAHA WR250RX 07-17 (3D7C)* The heat spot on the right side is not on the fingertip but on the palm of the hand
- so you may feel the temperature difference between the left and right side.
- YAMAHA WR250RX 07-17 (3D7B)*The heat spot on the right side is on the palm side
- not on the fingertip side
- so you may feel the temperature difference between the left and right side.
- ...and more.
Installed on TouringSEROW.Wiring, for example, was done without hesitation, referring to information on Net. The rest of the process, such as the extra wiring, required Sense, and I managed to put it ...Read More - Fits:
- YAMAHA Cerro 250 3C51
- YAMAHA Cerro 250 3C52
- YAMAHA Cerro 250 3C53
- YAMAHA Cerro 250 3C54
- YAMAHA Cerro 250 3C55
- ...and more.
Installed on Yamaha ST225 BRONCO.Installation is a snap!I installed it and promptly tipped it over.In the middle of the scrub, he was knocked off his feet by the incline and fell to the ground.I was d...Read More - Fits:
- YAMAHA WR250R 3D79
- YAMAHA
- YAMAHA WR250R 3D75
- YAMAHA WR250R 3D77
- YAMAHA WR250R 3D71
- ...and more.
I bought another ZETA SX3 bar for my wife's Course-only WR250X.The OEM quality, lightweight and sturdy construction is Race ish without any waste.The look is the same as the OEM, and the height and mo...Read More - Fits:
- YAMAHA WR250R 3D79
- YAMAHA
- YAMAHA WR250R 3D75
- YAMAHA WR250R 3D77
- YAMAHA WR250R 3D71
- ...and more.
I also put this one of Y's Gear on my wife's WR250X for Course.I used to use the upper clamp with zetasxStabilizer, but Y's Gear's upper clamp has HandlebarSetting scale, so I used Y's Gear's clamp fo...Read More - Fits:
- YAMAHA WR250R 3D79
- YAMAHA
- YAMAHA WR250R 3D75
- YAMAHA WR250R 3D77
- YAMAHA WR250R 3D71
- ...and more.
I chose this in order to install the Taper Bar of YZ250FX to my wife's Course running exclusive vehicle WR250X 2009.It is thought to be the same Parts as the Handlebar Clamp of 2006 YZ250, but this Qu...Read More - Fits:
- YAMAHA MT-09 SP BAMJ
- YAMAHA MT-09 B7NA
- YAMAHA MT-09 B7NM
- YAMAHA MT-09 SP BAM8
- YAMAHA MT-09 Model Code:B7NA
- ...and more.
If you don't have the damper on, the frame will continue to flex for a certain amount of time when cornering or gapping on the road. It's not so annoying, but I wish it would stop as soon as possible....Read More - Fits:
- YAMAHA WR250R 3D71
- YAMAHA WR250R 3D73
- YAMAHA WR250R 3D75
- YAMAHA WR250R 3D77
- YAMAHA WR250R 3D79
- ...and more.
Quantity of short lever for RALLY50:Pair (for Left and Right) I was using it with a GEAR, but the brake lever had no problem and the feeling of use was good, but as for the Clutch lever, the width of ...Read More - Fits:
- YAMAHA WR250RX 07-17 (3D7C)* The heat spot on the right side is not on the fingertip but on the palm of the hand
- so you may feel the temperature difference between the left and right side.
- YAMAHA WR250RX 07-17 (3D7B)*The heat spot on the right side is on the palm side
- not on the fingertip side
- so you may feel the temperature difference between the left and right side.
- ...and more.
It hasn't gotten cold yet, so this will be my impression of the installation, not the use!This time, it was installed in SEROW250!The most difficult part is to take out the Connector which connects Wi...Read More - Fits:
- YAMAHA Cerro 250 3C51|3C52|3C53|3C54|3C55|3C56|3C57|3C5C|3C5M|3C5S
- YAMAHA Cerro 250 3C53
- YAMAHA Cerro 250 3C54
- YAMAHA WR250X 3D76
- YAMAHA WR250X 3D78
- ...and more.
[How is it used?I installed it on my 1998 SEROW225WE, which is a city driving Main.Was the one you received as per Image?Just like the image!This is a product that was already on the market before I s...Read More - Fits:
- YAMAHA Cerro 250 3C51|3C52|3C53|3C54|3C55|3C56|3C57|3C5C|3C5M|3C5S
- YAMAHA Cerro 250 3C53
- YAMAHA Cerro 250 3C54
- YAMAHA WR250X 3D76
- YAMAHA WR250X 3D78
- ...and more.
The Size is also there and windproof and reduces the coldness of the hands in winter.However, because of the soft material, I do not expect much protection, and I do not think that it will be able to ...Read More - Fits:
- YAMAHA WR250R 3D77
- YAMAHA WR250R 3D79
- YAMAHA
- YAMAHA WR250R 3D71
- YAMAHA WR250R 3D73
- ...and more.
This Lever has been bothering me for a long time now, but I finally introduced it. The Round shape of the Lever is very different from other companies' products. Although it is Rounded forward quite d...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING