- Fits:
- YAMAHA TW225 91-22
- YAMAHA TW200 91-22
- YAMAHA DT230LANZA 97-99
- YAMAHA TRICKER 04-18
- YAMAHA XT250X 06-17
- ...and more.
Fit perfectly. Easy to install. High quality. Blue anodized colour is incredible. 3 finger lever is much more practical than the original one. I Bought a lot of zeta products, always amazing. You can ...Read More - Fits:
- KTM 250EXC-F *Master Cylinder|[Clutch]New MAGURA|[Brake]Brembo 14's
- KTM 200EXC 14-15 *Master cylinder|[clutch]new MAGURA|[brake]Brembo 14's
- KTM 300EXC *Master Cylinder|[Clutch]New MAGURA|[Brake]Brembo 14's
- KTM 250SX *Master Cylinder|[Clutch]New MAGURA|[Brake]Brembo 14's
- KTM 250EXC *Master Cylinder|[Clutch]New MAGURA|[Brake]Brembo 14's
- ...and more.
Even though this is an on/off road bike the customer wanted something with a little more different and wanted something in to match the KTM orange colour for the lever set. They eventually decided on ...Read More - Fits:
- KAWASAKI KX450F 13-18
- KAWASAKI KX250 19-20
- KAWASAKI KX250F 13-18
- YAMAHA YZ450F 08
- YAMAHA YZ426F 08
- ...and more.
This was the second part of the after market brake and clutch lever replacement on the YZ125. Even though this is an off road bike they wanted something with a little more bling and wanted something i...Read More - Fits:
- HONDA glom 13-24
- HONDA CBR250R (2011-) 11-18
- HONDA 400X 13-14
- HONDA CB400F (2013-) 13-14
- HONDA CBR400R 13-14
- ...and more.
몽키125에 장착했습니다. 클러치 위치 조정이 다소 필요하지만 퀄리티는 두말할거 없이 좋습니다.
레버 길이도 짧아져서 작은손에 잘맞고 조작성도 향상됩니다.
디자인도 너무 멋지고 다른 조절식 레버보다 더 세밀한 조정이 가능해서 가격대비 최고의 제품이 아닌가 싶네요Read More - Fits:
- HONDA CRF250L(S) 21-23 MD47
- HONDA CRF250L 21-23 MD47
- HONDA CRF250L 12-20
- HONDA CRF250M 13-17
- HONDA CRF250RALLY 21-23 MD47(*Cannot be used with stock handguard.)
- ...and more.
I trust the zeta brand very much. As expected, it's the best! It was easy to install when I saw the manual. Thank you very muchRead More - Fits:
- KAWASAKI NINJA1000 17-20
- KAWASAKI Z1000 17-21
- KAWASAKI Z1000R EDITION 20
- KAWASAKI Z900RS 18-21
- KAWASAKI Z900RS CAFE 18-21
- ...and more.
바이크와 색 조합이 일품이다. 벌어짐 없이 딱 정확히 일치하여 장착이 가능하며, 누구나 손쉽게 장착할수 있다.
일본 정품이라서 그런지 믿고 구매한다. 클러치 또한 그전 보다 순정보다 부드럽고 사용 하기 좋습니다.
또한 바이크 색상이랑 너무 잘맞습니다.Read More - Fits:
- KAWASAKI NINJA1000 17-20
- KAWASAKI Z1000 17-21
- KAWASAKI Z1000R EDITION 20
- KAWASAKI Z900RS 18-21
- KAWASAKI Z900RS CAFE 18-21
- ...and more.
There were a lot of difficult situations at first when I put it on, but if I look carefully and work on it, it's easy for anyone to do it.Read More - Fits:
- HONDA CRF250L(S) 21-23 MD47
- HONDA CRF250L 21-23 MD47
- HONDA CRF250L 12-20
- HONDA CRF250M 13-17
- HONDA CRF250RALLY 21-23 MD47(*Cannot be used with stock handguard.)
- ...and more.
Solid build lever set which had transformed control feeling of the bike, pretty similar to my mountain bike lever which is easy to controlRead More - Replaced a broken perch with this and it has worked flawlessly and was less expensive than a lot of other brands.Somehow managed to break the stock one but this replacement fit perfect and was just wh...Read More
- Fits:
- HONDA CB1000R 18-22
- HONDA CBR600RR 07-21
- HONDA CBR600RR 07-23 USA
- HONDA CBR1000RR 21-23 USA
- HONDA CBR1000RR 08-19
- ...and more.
[How is it used?OEM broke and replaced with Foldable anyway.Was the one you received as per Image?The texture was good and as good as the Image.Was the installation difficult?The instruction manual is...Read More - Fits:
- HONDA CBR250RR 17-23
Looks and operates just fine!The lever opening can also be adjusted with a screw for fine adjustment.If there is a problem, is it the price? LOL!Read More - Fits:
- KAWASAKI VERSYS650 15-22
- KAWASAKI Z900 17-22
- KAWASAKI Z650RS 22
- KAWASAKI Z650 17-22
- KAWASAKI NINJA650 17-22
- ...and more.
The finger-hanging part is well rounded and feels comfortable to operate. The BLever is shorter than the OEM by 1pc. of balls, but it is no problem to hang 3 fingers on the lever. I compared it with A...Read More - Fits:
- HONDA CB1000R 18-22
- HONDA CBR600RR 07-21
- HONDA CBR600RR 07-23 USA
- HONDA CBR1000RR 21-23 USA
- HONDA CBR1000RR 08-19
- ...and more.
CBR600RR 21 Listed as compatible, but not compatible!Brake switch is not available.for Race is possible.Read More - Fits:
- HONDA glom 13-24
- HONDA CBR250R (2011-) 11-18
- HONDA 400X 13-14
- HONDA CB400F (2013-) 13-14
- HONDA CBR400R 13-14
- ...and more.
Installed on Initial Model Grom. Replacement from Chinese LeverThe Brake Side has less rattle, but the Clutch Side has a little more rattle. This is a little bit expected gap.However, it is more solid...Read More - Fits:
- KAWASAKI NINJA 250SL 15-18
- KAWASAKI NINJA 250 08-22
- KAWASAKI NINJA 250R 08-22
- KAWASAKI NINJA 300 13-16
- KAWASAKI NINJA 400 18-23
- ...and more.
When I installed it in the same position as NORMAL, it interfered with Cowl. If you can't adjust it the same way as NORMAL, don't say it fits. I have a ABSMODEL and was refused to return it, even thou...Read More - Fits:
- KAWASAKI VERSYS650 15-22
- KAWASAKI Z900 17-22
- KAWASAKI Z650RS 22
- KAWASAKI Z650 17-22
- KAWASAKI NINJA650 17-22
- ...and more.
I really like the coloring, and the fact that you can change it in different stages, whereas other manufacturers have up to 6 stages, this one has quite a lot, which was also a deciding factor.The imp...Read More - Fits:
- HONDA glom 13-24
- HONDA CBR250R (2011-) 11-18
- HONDA 400X 13-14
- HONDA CB400F (2013-) 13-14
- HONDA CBR400R 13-14
- ...and more.
I've been using a Billet lever made by Large land.I added this Lever, which has a good reputation.First of all, there's no rattling!Fee Ring with Snap!So happy with the Jita imprint on the Lever and t...Read More - Fits:
- YAMAHA MT-09 21-22
- YAMAHA YZF-R6 17-21
- YAMAHA YZF-R1S 16-18
- YAMAHA YZF-R1M 15-21
- YAMAHA YZF-R1 15-21
Fits a 2019 YZF-R6.The texture and fitting of OEMLever is quite good, but the color is Silver, so I felt the color combination with the car body was not good. I bought this product not only for the co...Read More - Fits:
- SUZUKI KATANA 19-20
- SUZUKI GSX-S1000F 15-20
- SUZUKI GSX-S1000 15-20
- SUZUKI GSX-R1000R 09-22
- SUZUKI GSX-R600 06-19
- ...and more.
The lever position of the Clutch Side can also be adjusted, and the heavy Clutch seems to have become somewhat easier to pull.It is cool enough as it is, though I think it will show its power when it ...Read More - Fits:
- KAWASAKI VERSYS650 15-22
- KAWASAKI Z900 17-22
- KAWASAKI Z650RS 22
- KAWASAKI Z650 17-22
- KAWASAKI NINJA650 17-22
- ...and more.
The same product I used to install on my Ninja ZX-6R.Compared to the OEM Lever, it has finer adjustment, which is very nice for me with short fingers.The texture is very beautiful.Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING