- Fits:
- YAMAHA XJ900S 02 [Type:WF].
- YAMAHA XJ900S SP 02 [Type:WF].
- YAMAHA SR400 01-21 [Type:F].
- YAMAHA BOLT C-spec 14-21 [Type:F] ABS vehicle shim installed at the same time
- YAMAHA SCR950 17 [Type:F].
- ...and more.
Brake dust is more common than OEMs.Other than that, no complaints.Read More - Fits:
- YAMAHA MT03
- YAMAHA YZF-R3
- YAMAHA VIRAGO400 91-94
- YAMAHA YZF600R 97-01
- YAMAHA YZF1000R 96-01
- ...and more.
Отлично деталь полностью совместима и качественная , очень хорошо сделанная ! Пришло все быстро и хорошо упакованное ;-) мненравиться это магаз
-----------------------------------------------------...Read More - Fits:
- YAMAHA YZF-R7 99 [part used] Caliper side
- SUZUKI RG125 γ 94 [Frame No.]NF13A-107905 or later
- SUZUKI RG125 γ 93 [Frame No.]NF13A-105220 or later
- SUZUKI RG125 γ 92 [Frame No.]NF13A-102708 or later
- SUZUKI RG125 γ 91 [Frame No.]NF13A-100001 or later
- ...and more.
I've been sticking with the Tokico 6 pods. This time I adopted CaliperOverhaul and baked paint instead of OEM. I think it's a good corrosion protection. I've heard that some people use seal tape to pr...Read More - Fits:
- YAMAHA XJ900S 02 [Type:WF].
- YAMAHA XJ900S SP 02 [Type:WF].
- YAMAHA SR400 01-21 [Type:F].
- YAMAHA BOLT C-spec 14-21 [Type:F] ABS vehicle shim installed at the same time
- YAMAHA SCR950 17 [Type:F].
- ...and more.
This is a replacement for OEM Brake Pads.Golden Pad for peace of mind.Read More - Fits:
- YAMAHA YZF-R7 99 [part used] Caliper side
- SUZUKI RG125 γ 94 [Frame No.]NF13A-107905 or later
- SUZUKI RG125 γ 93 [Frame No.]NF13A-105220 or later
- SUZUKI RG125 γ 92 [Frame No.]NF13A-102708 or later
- SUZUKI RG125 γ 91 [Frame No.]NF13A-100001 or later
- ...and more.
The OEM Bleeder Bolt is always going to Rust and Decay, so this Material:It is safer to replace it with Stainless Steel.Be sure to bleed the air and refill the fluid in the MASTER after replacement.Th...Read More - Fits:
- YAMAHA BOLT 14-21 [Type:F] ABS vehicle shim installed at the same time
- YAMAHA XVS1300CB 12 [Type:WF].
- YAMAHA VIRAGO400 XV400 94 [Type:F].
- YAMAHA XJ900S SP 02 [Type:WF].
- YAMAHA XV1600 R100 ROADSTER 99-13 [Type:WF].
- ...and more.
As TitleThe strength of the brake lever can be controlled by the strength of the grip on the brake lever.FeedBack is easy to understand in the Control performance until it locks.In addition, Attack to...Read More - Fits:
- YAMAHA BOLT 14-21 [Type:F] ABS vehicle shim installed at the same time
- YAMAHA XVS1300CB 12 [Type:WF].
- YAMAHA VIRAGO400 XV400 94 [Type:F].
- YAMAHA XJ900S SP 02 [Type:WF].
- YAMAHA XV1600 R100 ROADSTER 99-13 [Type:WF].
- ...and more.
I installed this Red Pad on my SRV250 because it is a reliable product, and it is just right for touring.Read More - Fits:
- YAMAHA BOLT 14-21 [Type:F] ABS vehicle shim installed at the same time
- YAMAHA XVS1300CB 12 [Type:WF].
- YAMAHA VIRAGO400 XV400 94 [Type:F].
- YAMAHA XJ900S SP 02 [Type:WF].
- YAMAHA XV1600 R100 ROADSTER 99-13 [Type:WF].
- ...and more.
Installed on GRAND MAJESTY. It came to stop well.Read More - Fits:
- YAMAHA YZF-R7 99 [part used] Caliper side
- SUZUKI RG125 γ 94 [Frame No.]NF13A-107905 or later
- SUZUKI RG125 γ 93 [Frame No.]NF13A-105220 or later
- SUZUKI RG125 γ 92 [Frame No.]NF13A-102708 or later
- SUZUKI RG125 γ 91 [Frame No.]NF13A-100001 or later
- ...and more.
I replaced a 2006 K7 OEM BreederValve with a fluid blotch in the OEM BreederValveIt is made of stainless steel and looks greatI don't know if seal tape is necessary, but just in caseRead More - Fits:
- YAMAHA YZF-R7 99 [part used] Caliper side
- SUZUKI RG125 γ 94 [Frame No.]NF13A-107905 or later
- SUZUKI RG125 γ 93 [Frame No.]NF13A-105220 or later
- SUZUKI RG125 γ 92 [Frame No.]NF13A-102708 or later
- SUZUKI RG125 γ 91 [Frame No.]NF13A-100001 or later
- ...and more.
No functional problemsIt's a hobby to change from OEM as it's not used very oftenThe front brake is compatibleI installed it on a non-compliant rear brake for a test run, but the Fluid leakedThe OEM h...Read More - Fits:
- YAMAHA XJ6F 09-13
- YAMAHA FJR1300 01-18
- YAMAHA XJ400S DIVERSION 92
- YAMAHA XJ600S DIVERSION 93-01
- YAMAHA SCR950 17
- ...and more.
I installed it on MT09As a reminder, the MT09's fit size is M27×P3.0, but WrongThe fit Size is M20×P2.5, so don't make a mistake if you're buying oneThe product is a good one and I'm happy with itIt's...Read More - Fits:
- YAMAHA XJ6F 09-13
- YAMAHA FJR1300 01-18
- YAMAHA XJ400S DIVERSION 92
- YAMAHA XJ600S DIVERSION 93-01
- YAMAHA SCR950 17
- ...and more.
Since the MT09 colors are painted Black and Red, the Oil Filler Cap is also It will be a DAYTONA PremiumZone CapIt's a bit of a customRead More - Fits:
- YAMAHA BOLT 14-21 [Type:F] ABS vehicle shim installed at the same time
- YAMAHA XVS1300CB 12 [Type:WF].
- YAMAHA VIRAGO400 XV400 94 [Type:F].
- YAMAHA XJ900S SP 02 [Type:WF].
- YAMAHA XV1600 R100 ROADSTER 99-13 [Type:WF].
- ...and more.
I've been worried about the squeal since I replaced it with an external discI switched from Sintered to Red PadAs a result, the braking power feels weak, especially at the beginning of the gripAnd the...Read More - Fits:
- YAMAHA XJ900S 02 [Type:WF].
- YAMAHA XJ900S SP 02 [Type:WF].
- YAMAHA SR400 01-21 [Type:F].
- YAMAHA BOLT C-spec 14-21 [Type:F] ABS vehicle shim installed at the same time
- YAMAHA SCR950 17 [Type:F].
- ...and more.
The OEM Brake Pads from the OEM became usable after 4000k miles and were replacedI chose this Pad because of the good reputation of others, but it is a better overall product than the OEM Product I fe...Read More - Fits:
- YAMAHA YZF-R7 99 [part used] Caliper side
- SUZUKI RG125 γ 94 [Frame No.]NF13A-107905 or later
- SUZUKI RG125 γ 93 [Frame No.]NF13A-105220 or later
- SUZUKI RG125 γ 92 [Frame No.]NF13A-102708 or later
- SUZUKI RG125 γ 91 [Frame No.]NF13A-100001 or later
- ...and more.
I used it in a Tokico 6-pot, and since the Screw was with me, I figured I could use it! Brake fluid leaked and it was Large Please be careful There is no problem in the productRead More - Fits:
- YAMAHA BOLT 14-21 [Type:F] ABS vehicle shim installed at the same time
- YAMAHA XVS1300CB 12 [Type:WF].
- YAMAHA VIRAGO400 XV400 94 [Type:F].
- YAMAHA XJ900S SP 02 [Type:WF].
- YAMAHA XV1600 R100 ROADSTER 99-13 [Type:WF].
- ...and more.
I was using Fine alloy, but I tried replacing it to enhance the effectiveness of Brake on the descending slopeThe characteristics of Brake which I exchanged are similar in both cases "Mild" ...Read More - Fits:
- YAMAHA XJ6F 09-13
- YAMAHA FJR1300 01-18
- YAMAHA XJ400S DIVERSION 92
- YAMAHA XJ600S DIVERSION 93-01
- YAMAHA SCR950 17
- ...and more.
Because it was around the black engine, buy it for Dress-up.Very beautiful Anodized of Black and Red is good with no problem with accuracy!I am very satisfied..Evaluation of surroundings well and acqu...Read More - Fits:
- YAMAHA XJ6F 09-13
- YAMAHA FJR1300 01-18
- YAMAHA XJ400S DIVERSION 92
- YAMAHA XJ600S DIVERSION 93-01
- YAMAHA SCR950 17
- ...and more.
Because the engine is full of Black, I tried installing with One pointAccent.I personally like the color of BlackRed, so it felt a good feeling.Making details is solid, and the character of DAYTONA is...Read More - Fits:
- YAMAHA XJ6F 09-13
- YAMAHA FJR1300 01-18
- YAMAHA XJ400S DIVERSION 92
- YAMAHA XJ600S DIVERSION 93-01
- YAMAHA SCR950 17
- ...and more.
I thought if it was a little bigger, it was smaller than I thought. Design is good, I think Cool. I can feel PetitCustom. Since BOLT Shoulder Bag was Cap with Level gauge, Level gauge disappears when ...Read More - Fits:
- YAMAHA YZF-R7 99 [part used] Caliper side
- SUZUKI RG125 γ 94 [Frame No.]NF13A-107905 or later
- SUZUKI RG125 γ 93 [Frame No.]NF13A-105220 or later
- SUZUKI RG125 γ 92 [Frame No.]NF13A-102708 or later
- SUZUKI RG125 γ 91 [Frame No.]NF13A-100001 or later
- ...and more.
Because it rusts as soon as iron, Material : I purchased Stainless Steel. We are solidly making details, we are satisfied with Large change. I am happy that it's a bit cheaper.Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING