(0)44 Reviews View type:
- Fits:
- YAMAHA Bolt CSpecifications 15-16 VN04J
- HONDA STEED600 88-98
- HONDA STEED400 VSE
- HONDA STEED400 VLX
- HONDA STEED400 VLS
- ...and more.
I bought this because the footpeg I was using was damaged in a fall. I ride a Shadow slasher 400 and was able to replace it with no problem. The footpeg itself feels quite heavy. I haven't seen the ex...Read More - Fits:
- YAMAHA BOLT R-SPEC 14-21 (VN04J/VN09J)
- YAMAHA BOLT 14-21 (VN04J/VN09J)
I compared it with the Backrest of OEMOption, but the Pipe is thick and firm, and I chose here that the body can be supported by the Pipe that extended to the SIDE as the Pillion Bar.The people who ro...Read More - Fits:
- YAMAHA BOLT R-SPEC 14-21 VN04J|VN09J(ABS vehicles also acceptable)
- YAMAHA BOLT 14-21 VN04J|VN09J(ABS vehicles also acceptable)
These are the reduced reach handle bars to get for the Yamaha Bolt. They are truly bolt on with no other modifications needed. I am surprised how they improved the reach and rider position and comfort...Read More - Fits:
- YAMAHA Bolt 14-16 VN04J R-SPEC
- YAMAHA Bolt 14-16 VN04J
I bought this to Refreshing the look of the product.As expected, it looks better, but the quality is not good, the lens is foggy and Rust occurs soon, so I returned to OEM. I think the price is too hi...Read More - Fits:
- HONDA SHADOW PHANTOM750 10-16 RC53
- HONDA SHADOW400 01-08
- HONDA SHADOW400 09-16 NC45 Shadow Custom 400
- HONDA SHADOW750 01-15
- HONDA Shadow classical400 09-16 NC44
- ...and more.
I was skeptical that it would look good on ESTRELLA. I thought I made a mistake until I got used to looking at it, but now that I'm used to looking at it, I'm glad I bought it. I am satisfied.Read More - Fits:
- HONDA MAGNA750 93-98 RC43
- HONDA MAGNA(V-TWIN MAGNA) 99-07 MC29 (Rear side is also possible)
- HONDA MAGNA(V-TWIN MAGNA) 94-07 MC29 Magna 250S
- HONDA MAGNA(V-TWIN MAGNA) 94-07 MC29
- HONDA STEED600 88-98 VLX
- ...and more.
This is the same type of footpeg replacement as the Shift pegs that were previously replaced, the same There is a sense of unity between the two typesThe product is quite heavy and has a solid structu...Read More - Fits:
- YAMAHA DRAGSTAR250 00-16 VG02J|05J
- YAMAHA TW225E 02-07
- YAMAHA TW200 -01
- YAMAHA TW200E -01
- SUZUKI BOULEVARDM50(INTRUDERM800/VZ800) K5 05
- ...and more.
model: HA6431 720mm
good no more words
use for honda steed 600cc
bagage or anything hanging on the sissy bar
ididnt think its too short i need more longer!!!Read More - Fits:
- YAMAHA Bolt 14-16 VN04J R-SPEC
- YAMAHA Bolt 14-16 VN04J
Handlebar was purchased along with the replacement, but 300mm is too long and the handling of Wiring and Coupler'sI had a hard time finding a place to store itAs a result, I removed the OEMWiring beca...Read More - Fits:
- YAMAHA Bolt CSpecifications 15-16 VN04J
- YAMAHA Bolt 14-16 VN04J R-SPEC
- YAMAHA Bolt 14-16 VN04J
I wanted to make the back view of BOLT a little bit better for parenthesis, so I installed it It is the type which does not remove the Stop lamp of NORMAL Since the external LED stop lamp is not relia...Read More - Fits:
- YAMAHA Bolt 14-16 VN04J R-SPEC
- YAMAHA Bolt 14-16 VN04J
First of all, removal of Tank is necessary, but this is not too difficult.I think that it depends on the Handlebar installed, but in my case 30 cm was long.If Wiring is left over, it will be quite har...Read More - Fits:
- YAMAHA BOLT R-SPEC 14-21 VN04J|VN09J(ABS vehicles also acceptable)
- YAMAHA BOLT 14-21 VN04J|VN09J(ABS vehicles also acceptable)
Other Owner says, but the STD Handlebar is a bit far. I am 176 cm tall but I decided to tour around 200 km with STD Handlebar and purchase this item.I ran about 200 km after the exchange, but it is fu...Read More - Fits:
- YAMAHA BOLT R-SPEC 14-21 (VN04J/VN09J)
- YAMAHA BOLT 14-21 (VN04J/VN09J)
Because it is Large, preference may be different if you consider it as the design of the body.However, since it supports up to the waist, you can leave the upper body as large as you like, ride comfor...Read More - Fits:
- HONDA Rebel300
- YAMAHA Bolt CSpecifications VN04J 15-16
- YAMAHA Bolt 14-16 VN04J
- YAMAHA VIRAGO250(XV250) 88- 3DM
- YAMAHA DRAGSTAR400 CLASSIC 98-16 4TR|VH01|02J
- ...and more.
I bought this backrest for the Honda Joker 90, knowing that I can not do without the improvements! But everything turned out just fine! I drilled just 4 holes in the trunk and it became like my own! I...Read More - Fits:
- YAMAHA BOLT R-SPEC 14-21 VN04J|VN09J(ABS vehicles also acceptable)
- YAMAHA BOLT 14-21 VN04J|VN09J(ABS vehicles also acceptable)
Cut 2 centimeters at each end and use a little angle. Therefore, Brake hose has a little margin.(Of course you can use it without Cut)The installation is also amateur and it is about two hours..In my ...Read More - Fits:
- YAMAHA BOLT R-SPEC 14-21 VN04J|VN09J(ABS vehicles also acceptable)
- YAMAHA BOLT 14-21 VN04J|VN09J(ABS vehicles also acceptable)
Bolt RSpecifications attached to ABS.I think I just came in front of you, but even with that alone pretty much the posture itself became easier.I have not installed it yet, so I am not riding long dis...Read More - Fits:
- YAMAHA BOLT R-SPEC 14-21 (VN04J/VN09J)
- YAMAHA BOLT 14-21 (VN04J/VN09J)
For Trike I put it somewhat widened and I replaced Bolt for a longer guy.It is cool to match the atmosphere of Motorcycle !!I'm glad I chose this!Read More - Fits:
- YAMAHA BOLT R-SPEC 14-21 VN04J|VN09J(ABS vehicles also acceptable)
- YAMAHA BOLT 14-21 VN04J|VN09J(ABS vehicles also acceptable)
Because the Handlebar is long and it is Large, in order to make it feel Spartan, I was looking for Handlebar. YAMAHA 's xvs 950 a has no Parts, and there is no entry in the corresponding model Min...Read More - Fits:
- YAMAHA Bolt CSpecifications 15-16 VN04J
- YAMAHA Bolt 14-16 VN04J R-SPEC
- YAMAHA Bolt 14-16 VN04J
I think that it will be able to hook bigger and bigger hooks than I thought. Plating is clean and texture is good. Since it is inconspicuous when looking at the far eye, I will not break the Motorcycl...Read More - Fits:
- YAMAHA BOLT R-SPEC 14-21 VN04J|VN09J(ABS vehicles also acceptable)
- YAMAHA BOLT 14-21 VN04J|VN09J(ABS vehicles also acceptable)
The shape of the Handlebar is very good, it is naturally in front of the Style and it is very easy to operateI like it. (^_-) OKWeight Balancer thinks it would be better to get stolen (^_-) Because it...Read More - Fits:
- YAMAHA Bolt CSpecifications 15-16 VN04J
- YAMAHA Bolt 14-16 VN04J R-SPEC
- YAMAHA Bolt 14-16 VN04J
LED blinker (Small Type) By doing so, Balance with Original Tail lamp got worse, so I decided to install Fender Eliminator Kit with with Tail Lamp.HarnessHolder (Protective plate) The area is smaller ...Read More
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING