- Fits:
- YAMAHA Dragster 400 (DSC4) 5KP6|9|A|D|F|G|J|N|P
- YAMAHA Dragster 400 (DSC4) 4TR5|7|9
- YAMAHA Dragster 400 (DSC4) 35C1|3|5|7
- YAMAHA Dragster 400 (DS4) 5KP1|2|3|4|7|8|B|C|E|H|K|L|M
- YAMAHA Dragster 400 (DS4) 4TR1|2|3|4|6|8
- ...and more.
Well fit my sr400 but this item not included oil seal at filter cover.
I think sell assemble with filter and O ring is betterRead More - Fits:
- YAMAHA XJR1300 98- 5EA1/9/RP17J 98.3- [displacement]1300 [number of units required]4
- YAMAHA XJR1200/R 94-98 4KG 94.3-98.3 [displacement]1200 [number of units required]4
- YAMAHA XJ600 95- 4KM5 [displacement]900 [number of units required]4
- YAMAHA VMAX 85-89 [displacement]1200 [number of units required]4
- YAMAHA VMAX 90-08 3UF 90.1-08 [displacement]1200 [number of units required]4
- ...and more.
A friend wanted an iridium plug for their CBX125 and Webike was the place to get it. This was easy to find using the tools provided by Webike and all the links to the manufacturers websites. They had ...Read More - Fits:
- BMW K1100LT 92-98
- BMW K1100RS 92-98
- HONDA CB1000 SUPER FOUR 92-98
- HONDA CB1000 SUPER FOUR T2 92-98
- HONDA CB1300 Super Touring 09-
- ...and more.
I'm currently using NGK DPR7EA PLUG ON MY TW200 AND It's well over the 6000km stiil going strong never had a problem with that. This DPR8EA PLUG LOOK THE SAME AS DPR7EA.THREAD DIAMETER,LENGHT AND 18MM...Read More - Fits:
- HONDA VTZ250 87-88 87.8-88.6 Number of pieces required:2
- HONDA VTR250 98-07 98.1-07 MC33 required number of pins:2
- HONDA VT250 INTEGRA 84-87 84.9-87.8 Necessities:2
- HONDA VT250 SPADA 88- 88.12- MC20 required number of pins:2
- HONDA VT250 INTEGRA 82- 82.6- Required number of pieces:2
- ...and more.
我的摩托车是HONDA CB500F,这台摩托车在使用几年后早上发动摩托车总是有一些点火困难,去维修店更换火星塞也不能完全解决,后来发现是高压线老化了,然后我在webike购买了这款NGK高压点火线,困扰我很久的问题就解决了。Read More - Fits:
- YAMAHA SRX400 3VN
Although this kit is for the later SRX400"s I installed it to my twin shock 1985 model. I replaced all jets needles etc as mine were worn and was difficult to tune. The bike is not standard and runs a...Read More - Fits:
- YAMAHA TDM900 02-13
- YAMAHA XT660Z TENERE 04-06 R
- YAMAHA XT660Z TENERE 04-06 X
- YAMAHA VIRAGO750 82
- YAMAHA XT600E 90-95
- ...and more.
Magnet input provides a sense of security.We use Magnet inlet once every two times.Gasket is also in place.Read More - Fits:
- HONDA VTZ250 87-88 87.8-88.6 Number of pieces required:2
- HONDA VTR250 98-07 98.1-07 MC33 required number of pins:2
- HONDA VT250 INTEGRA 84-87 84.9-87.8 Necessities:2
- HONDA VT250 SPADA 88- 88.12- MC20 required number of pins:2
- HONDA VT250 INTEGRA 82- 82.6- Required number of pieces:2
- ...and more.
7 days airfreight to my door in Australia. Super impressed. Will be purchasing more from Webike for sure. Item was in stock and arrived as ordered.Read More - Fits:
- YAMAHA SRX600 85-88 1JK/2NX/3GV1/3SX1/3SX2
- YAMAHA SRV250 92-97 4DN1/4DN2/4DN3/4DN4/4DN5/4DN6
- YAMAHA SRX600 91 1JK/2NX/3GV1/3SX1/3SX2
- YAMAHA SRX400 85-96 1JL0/3HU1/2NY0/3VN1/3VN2/3VN5
- YAMAHA SRV250 RENAISSA 92-98 (4DN)
- ...and more.
I think the quality is the same as OEM Product.Read More - Fits:
- YAMAHA SR400 1JR [Stock No.4X7-13440-90] [Model]SR400 [Type]3HTB
- YAMAHA SR400 1JR [stock number]4X7-13440-90 [model]SR400 [type]3HTA
- YAMAHA SR400 1JR [stock number]4X7-13440-90 [model name]SR400 [type]1JR
- YAMAHA SR400 1JR [stock No.4X7-13440-90] [model name]SR400 [type]3HT1
- YAMAHA Renaissa (RENAISSA) 4DN [stock number]4X7-13440-90 [model name]SRV250S [type]4DN3
- ...and more.
Used in oil replacement for YAMAHA FZr250R.Note that only 3LN1 is compatible with FZr250R, after that it is changed to Cartridge Type!There is no need to buy a separate O-ring, and yet the low price m...Read More - Fits:
- YAMAHA SR400 1JR [Stock No.4X7-13440-90] [Model]SR400 [Type]3HTB
- YAMAHA SR400 1JR [stock number]4X7-13440-90 [model]SR400 [type]3HTA
- YAMAHA SR400 1JR [stock number]4X7-13440-90 [model name]SR400 [type]1JR
- YAMAHA SR400 1JR [stock No.4X7-13440-90] [model name]SR400 [type]3HT1
- YAMAHA Renaissa (RENAISSA) 4DN [stock number]4X7-13440-90 [model name]SRV250S [type]4DN3
- ...and more.
Purchased for DRAGSTAR1100 VP10J.I always use it because it is with O-ring, but the Filter could be used for DRAGSTAR 1100, but the O-ring was not compatible at all.I would like it to be mentioned.Read More - Fits:
- YAMAHA XTZ660 TENERE 660cc All 93
- YAMAHA XT660Z TENERE 660cc All 13
- YAMAHA XTZ660 TENERE 660cc All 91
- YAMAHA XTZ660 TENERE 660cc All 92
- YAMAHA XT660Z TENERE 660cc All 12
- ...and more.
Reliable K&N productsWith YOSHIMURA's Original stickerThis is my third repeater.I don't really have a feel for the performance.The trust of the Brand and the fact that YOSHIMURA is carrying it.Of cour...Read More - Fits:
- YAMAHA FZ250 R 85-86 Oil Temperature Sensor (Sensor installation position and oil drain bolt)
- HONDA BROS 600 92-94 Oil temperature sensor (Sensor mounting position and oil pan drain bolt)
- YAMAHA YZF750SP 95 Oil temperature sensor (sensor mounting position and oil pan drain bolt)
- YAMAHA YZF-R1M 15-21 Oil temperature sensor (Sensor mounting position
- oil pan drain bolt)
- ...and more.
this is a must have accessory for the Yoshimura Pro-gress2 multimeter. The Engine Temperature Sensor and the Water cooland temperature sensor. I purchased the Type C & D for my Honda Africa Twin XRV65...Read More - Fits:
- YAMAHA XTZ660 TENERE 660cc All 93
- YAMAHA XT660Z TENERE 660cc All 13
- YAMAHA XTZ660 TENERE 660cc All 91
- YAMAHA XTZ660 TENERE 660cc All 92
- YAMAHA XT660Z TENERE 660cc All 12
- ...and more.
As a Filter Brand, I have no complaints. I don't know the effect of the Filter as much as I really feel it. I'm not sure about the effect of the Filter.Read More - Fits:
- HONDA VTZ250 87-88 87.8-88.6 Number of pieces required:2
- HONDA VTR250 98-07 98.1-07 MC33 required number of pins:2
- HONDA VT250 INTEGRA 84-87 84.9-87.8 Necessities:2
- HONDA VT250 SPADA 88- 88.12- MC20 required number of pins:2
- HONDA VT250 INTEGRA 82- 82.6- Required number of pieces:2
- ...and more.
This imprementation is based on the connection to the Utani Coil.Connection to NORMAL is not written.[How is it used?Model used:D TrackerApplications:Motard race, TouringDuration of use:About 6 years ...Read More - Fits:
- YAMAHA XJR1300 98- 5EA1/9/RP17J 98.3- [displacement]1300 [number of units required]4
- YAMAHA XJR1200/R 94-98 4KG 94.3-98.3 [displacement]1200 [number of units required]4
- YAMAHA XJ600 95- 4KM5 [displacement]900 [number of units required]4
- YAMAHA VMAX 85-89 [displacement]1200 [number of units required]4
- YAMAHA VMAX 90-08 3UF 90.1-08 [displacement]1200 [number of units required]4
- ...and more.
[How is it used?Model used:FTR223Applications:Street riding, Touring, CircuitPeriod of use:About 3 years or soNumber of bottles used:About 4 Repeat purchasesWas the one you received as per Image?As yo...Read More - Fits:
- YAMAHA SRX600 85-88 1JK/2NX/3GV1/3SX1/3SX2
- YAMAHA SRV250 92-97 4DN1/4DN2/4DN3/4DN4/4DN5/4DN6
- YAMAHA SRX600 91 1JK/2NX/3GV1/3SX1/3SX2
- YAMAHA SRX400 85-96 1JL0/3HU1/2NY0/3VN1/3VN2/3VN5
- YAMAHA SRV250 RENAISSA 92-98 (4DN)
- ...and more.
I bought this one because it is a cheaper replacement than OEM.It's nice to be able to change it easily while changing Oil.Note that the O-ring is not included.I was able to use it without any problem...Read More - Fits:
- YAMAHA SRX600 85-88 1JK/2NX/3GV1/3SX1/3SX2
- YAMAHA SRV250 92-97 4DN1/4DN2/4DN3/4DN4/4DN5/4DN6
- YAMAHA SRX600 91 1JK/2NX/3GV1/3SX1/3SX2
- YAMAHA SRX400 85-96 1JL0/3HU1/2NY0/3VN1/3VN2/3VN5
- YAMAHA SRV250 RENAISSA 92-98 (4DN)
- ...and more.
Purchased to replace Filter on ZrX1200DAEGIt's cheaper than buying OEM, so I'll be using it for a while.Read More - Fits:
- YAMAHA SR400 1JR [Stock No.4X7-13440-90] [Model]SR400 [Type]3HTB
- YAMAHA SR400 1JR [stock number]4X7-13440-90 [model]SR400 [type]3HTA
- YAMAHA SR400 1JR [stock number]4X7-13440-90 [model name]SR400 [type]1JR
- YAMAHA SR400 1JR [stock No.4X7-13440-90] [model name]SR400 [type]3HT1
- YAMAHA Renaissa (RENAISSA) 4DN [stock number]4X7-13440-90 [model name]SRV250S [type]4DN3
- ...and more.
[How is it used?Bought for SR400.It has Packing and is very good.Was the one you received as per Image?It is as per Image.I've read in other people's impressions that the O-ring Size doesn't fit, but ...Read More - Fits:
- HONDA VTZ250 87-88 87.8-88.6 Number of pieces required:2
- HONDA VTR250 98-07 98.1-07 MC33 required number of pins:2
- HONDA VT250 INTEGRA 84-87 84.9-87.8 Necessities:2
- HONDA VT250 SPADA 88- 88.12- MC20 required number of pins:2
- HONDA VT250 INTEGRA 82- 82.6- Required number of pieces:2
- ...and more.
I decided to change the plug cord because the ignition was bad, and I decided to buy a good one anyway! I decided to buy a good one anyway!To be honest, I can't tell the difference on the web.I think ...Read More - Fits:
- HONDA VTR1000F SC36
- KAWASAKI Anhelo
- KAWASAKI ESTRELLA
- KAWASAKI ELIMINATOR 250
- SUZUKI SKYWAVE400 burgman
- ...and more.
I think that there are many people who think that it is a brush-boom effect depending on the person, but because ignition tune can feel the effect at the time of the single engine, I exchanged it from...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING