- Fits:
- YAMAHA XVS950A 09-15
- YAMAHA ZEAL 91-99
- YAMAHA Grand Majesty 250 04-07
- YAMAHA diversion 91
- YAMAHA XVS1300CU 11-13
- ...and more.
Brake dust is more common than OEMs.Other than that, no complaints.Read More - Fits:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...and more.
I've been sticking with the Tokico 6 pods. This time I adopted CaliperOverhaul and baked paint instead of OEM. I think it's a good corrosion protection. I've heard that some people use seal tape to pr...Read More - Fits:
- YAMAHA XVS950A 09-15
- YAMAHA ZEAL 91-99
- YAMAHA Grand Majesty 250 04-07
- YAMAHA diversion 91
- YAMAHA XVS1300CU 11-13
- ...and more.
This is a replacement for OEM Brake Pads.Golden Pad for peace of mind.Read More - Fits:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...and more.
The OEM Bleeder Bolt is always going to Rust and Decay, so this Material:It is safer to replace it with Stainless Steel.Be sure to bleed the air and refill the fluid in the MASTER after replacement.Th...Read More - Fits:
- YAMAHA BOLT C-spec 14-21
- YAMAHA BOLT R 14-21
- YAMAHA BOLT 14-21
- YAMAHA BOLT 14-21
- YAMAHA DS400 96-17
- ...and more.
As TitleThe strength of the brake lever can be controlled by the strength of the grip on the brake lever.FeedBack is easy to understand in the Control performance until it locks.In addition, Attack to...Read More - Fits:
- YAMAHA BOLT C-spec 14-21
- YAMAHA BOLT R 14-21
- YAMAHA BOLT 14-21
- YAMAHA BOLT 14-21
- YAMAHA DS400 96-17
- ...and more.
I installed this Red Pad on my SRV250 because it is a reliable product, and it is just right for touring.Read More - Fits:
- YAMAHA BOLT C-spec 14-21
- YAMAHA BOLT R 14-21
- YAMAHA BOLT 14-21
- YAMAHA BOLT 14-21
- YAMAHA DS400 96-17
- ...and more.
Installed on GRAND MAJESTY. It came to stop well.Read More - Fits:
- YAMAHA SR400 78-84
- YAMAHA SR500 78-84
- YAMAHA SR400 10-21
- YAMAHA SR400 19-21
- YAMAHA SR400 19-21
It is Rear hubDust cover of GermanyKEDO that comes out from DAYTONA.The SR has a bare rear hub, so dust and garbage can easily accumulate inside the hub.It is a product that prevents dust and garbage ...Read More - Fits:
- YAMAHA SR400 -17 [Where used] Rear
- YAMAHA SR500 85-99 [Used in] rear
I use this one every time when my Shoe is low because of the front and rear Drum brake.It works better than the OEM, I have no complaints with the OEM but I want it to work a little better so I choose...Read More - Fits:
- YAMAHA MT-25 16 MT250 [Frame No.]RG10J-
- YAMAHA MT03
- YAMAHA SR400 19-21 B9F3 RH16J
- YAMAHA SR400 19-21 B9F1 RH16J
- YAMAHA MT-03 (2015-) 16 MT320[Frame No.]RH07J-
Bought these for the second time. The first time was type D which is twisted type. I should have bought non twist which is type A. So before purchasing make sure you need which one suits. Read More - Fits:
- YAMAHA MT-25 16 MT250 [Frame No.]RG10J-
- YAMAHA MT03
- YAMAHA SR400 19-21 B9F3 RH16J
- YAMAHA SR400 19-21 B9F1 RH16J
- YAMAHA MT-03 (2015-) 16 MT320[Frame No.]RH07J-
I installed it in a car model called X1R of ThailandYamahaIf the angle of Banjo is within the acceptable range, you can use it If you don't, it comes with a Large bodyI'd like to use mesh hose, but it...Read More - Fits:
- YAMAHA SR400 00-21 [Frame No.]1JR-
- YAMAHA SR400 01 [Frame No.]RH01J-
- YAMAHA SR400 02 [Frame No.]RH01J-
- YAMAHA SR400 03 [Frame No.]RH01J-
- YAMAHA SR400 04 [Frame No.]RH01J-
- ...and more.
I bought it used and never replaced it, so I replaced it with the Brake Cable There was a lot of play when I adjusted it, but it became just fine after I replaced itRead More - Fits:
- YAMAHA SR400 00-21 [Frame No.]1JR-
- YAMAHA SR400 88-21 [Frame No.]1JR-268101 to 275000
- YAMAHA SR400 94 [Frame No.]1JR-301101 to 320
- 000
- YAMAHA SR400 97-21 [frame no.]1JR-
- ...and more.
I bought it used and had never replaced it since I bought it used, and it's called DAYTONA, which is a cheap price I bought it because it was Brand I'm happy with the quality, but the Rubber cover on ...Read More - Fits:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...and more.
I replaced a 2006 K7 OEM BreederValve with a fluid blotch in the OEM BreederValveIt is made of stainless steel and looks greatI don't know if seal tape is necessary, but just in caseRead More - Fits:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...and more.
No functional problemsIt's a hobby to change from OEM as it's not used very oftenThe front brake is compatibleI installed it on a non-compliant rear brake for a test run, but the Fluid leakedThe OEM h...Read More - Fits:
- YAMAHA FZ1 08-14 Front Brake Master
- YAMAHA FAZER8 11-15 Front Brake Master
- YAMAHA FJR1300 03-18 Front Brake Master
- YAMAHA BOLT C-Spec 15-20 Front Brake Master
- YAMAHA XSR900 16-20 Front Brake Master
- ...and more.
I have just received the Master cylinder cap that I purchased the other day, so I installed it right away! It wasIt's a bit of a dress-up, but I'm glad it's a good atmosphereRead More - Fits:
- YAMAHA FZ1 08-14 Front Brake Master
- YAMAHA FAZER8 11-15 Front Brake Master
- YAMAHA FJR1300 03-18 Front Brake Master
- YAMAHA BOLT C-Spec 15-20 Front Brake Master
- YAMAHA XSR900 16-20 Front Brake Master
- ...and more.
For dress-up, I bought Front's Master cylinder tank cap and I didI haven't installed it yet, but I made it match the body colorIt's a bit of a dress-up, but I'm looking forward to installing itRead More - Fits:
- YAMAHA BOLT C-spec 14-21
- YAMAHA BOLT R 14-21
- YAMAHA BOLT 14-21
- YAMAHA BOLT 14-21
- YAMAHA DS400 96-17
- ...and more.
I've been worried about the squeal since I replaced it with an external discI switched from Sintered to Red PadAs a result, the braking power feels weak, especially at the beginning of the gripAnd the...Read More - Fits:
- YAMAHA XVS950A 09-15
- YAMAHA ZEAL 91-99
- YAMAHA Grand Majesty 250 04-07
- YAMAHA diversion 91
- YAMAHA XVS1300CU 11-13
- ...and more.
The OEM Brake Pads from the OEM became usable after 4000k miles and were replacedI chose this Pad because of the good reputation of others, but it is a better overall product than the OEM Product I fe...Read More - Fits:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...and more.
I used it in a Tokico 6-pot, and since the Screw was with me, I figured I could use it! Brake fluid leaked and it was Large Please be careful There is no problem in the productRead More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING