- Fits:
- YAMAHA MATE
- YAMAHA MATE90
- YAMAHA NewsMATE V50N
- YAMAHA YB-1
- YAMAHA YB50
- ...and more.
I couldn't use this in my 1998 YB-1. The design of the bulb doesn't lock into the bulb holder. Shame because it could do with a better headlight.Read More - Fits:
- HONDA CB-1 Models with 35 mm diameter front forks
- HONDA CB250RS Vehicles with 33mm diameter front forks
- HONDA CB250RSZ Vehicles with 33mm diameter front forks
- HONDA CB400Four -77
- HONDA CB400SS 01-08
- ...and more.
About quality and texture be neatly finished in black
About the feeling of use I decided to compromise a little and use it, but it doesn't fit
Products to buy together Winker bracket, bolt, nut,
Di...Read More - Fits:
- YAMAHA RZ350RR (52Y)
- YAMAHA RD250 (Last model)
- YAMAHA RZ250RR (51L0)
- YAMAHA RZ350
- YAMAHA RZ250R (1AR0/29L0)
- ...and more.
Since the OEM is no longer selling.MFBattery is now available ◎Read More - Fits:
- YAMAHA MATE
- YAMAHA MATE90
- YAMAHA NewsMATE V50N
- YAMAHA YB-1
- YAMAHA YB50
- ...and more.
It's not like White, as others have written.But considering the price, I think it's good because it's normal.Read More - A company like OEMHarness is a savior for old car riders who are out of business.The price is getting higher and higher and it's getting harder and harder to get your hands on them, but in this day an...Read More
- Fits:
- SUZUKI RF400 R
- SUZUKI GSX750E
- SUZUKI GSX400 E
- SUZUKI GSX250 E
- SUZUKI GSX400 F
- ...and more.
I didn't think of any other manufacturer because my previous car was also equipped with Mats Stripe.The OEM and durability of the W series are good, and I hesitated to replace it, but I thought that I...Read More - Fits:
- HONDA CB-1 Models with 35 mm diameter front forks
- HONDA CB250RS Vehicles with 33mm diameter front forks
- HONDA CB250RSZ Vehicles with 33mm diameter front forks
- HONDA CB400Four -77
- HONDA CB400SS 01-08
- ...and more.
Because of the top bridge, headlight STAY...
I bought it because I had to change it. I was looking forward to it.
It doesn't fit perfectly with "ape100".
There's a gap between the headlight stay and t...Read More - Fits:
- YAMAHA RZ350RR (52Y)
- YAMAHA RD250 (Last model)
- YAMAHA RZ250RR (51L0)
- YAMAHA RZ350
- YAMAHA RZ250R (1AR0/29L0)
- ...and more.
I was told the installation would require widening the holes.It was put on as it was.That's a relief.Read More - Fits:
- YAMAHA MATE
- YAMAHA MATE90
- YAMAHA NewsMATE V50N
- YAMAHA YB-1
- YAMAHA YB50
- ...and more.
I used it on my KSR80 MX08B6 Headlight.NORMAL is 25W× quite dark with a 25W bulb.I bought this product to see if I could eliminate some of the problem.The process was very easy.It is brighter than NOR...Read More - Fits:
- YAMAHA
- YAMAHA
It's a great product, I just had to cut it down a little because it was interfering with my Main switch.Read More - Fits:
- YAMAHA MATE
- YAMAHA MATE90
- YAMAHA NewsMATE V50N
- YAMAHA YB-1
- YAMAHA YB50
- ...and more.
It is certainly brighter than the Normal valve. A little cheaper would be nice.Read More - Fits:
- SUZUKI RF400 R
- SUZUKI GSX750E
- SUZUKI GSX400 E
- SUZUKI GSX250 E
- SUZUKI GSX400 F
- ...and more.
The OEM light valve of SEROW250 ran out of bulbs, so I installed it.I ran out after just under 60,000km, so I'm happy to replace it when it gets over 50,000km.Compared to the OEM, it's about three tim...Read More - Fits:
- YAMAHA MATE
- YAMAHA MATE90
- YAMAHA NewsMATE V50N
- YAMAHA YB-1
- YAMAHA YB50
- ...and more.
The original Valve on the AXIS 90 was too dark and very dangerous to drive at nightI was looking for a Valve that would brighten things up a bit, and this is what I foundIt definitely makes it brighte...Read More - Fits:
- SUZUKI RF400 R
- SUZUKI GSX750E
- SUZUKI GSX400 E
- SUZUKI GSX250 E
- SUZUKI GSX400 F
- ...and more.
Brightness, light distribution, ease of installation depending on the high precision of the product, etc.. It isThere are no messy parts and the durability lasts until you forget when you replaced itC...Read More - Fits:
- HONDA
- HONDA Forza (MF08) 04-
- HONDA Forza Z 04-
- HONDA
- HONDA
- ...and more.
I specified the make and model of car, but when I installed it, the claws didn't fit! In the end, I broke the claw in one place and shaved it off I looked at the compatibility list of the product I re...Read More - Fits:
- HONDA
- HONDA
- HONDA
- HONDA CB125 TF
- HONDA
- ...and more.
Is it a little brighter than Halogen? AboutAlso, the heat sink needs to be shaved off a little bit to be able to install it on the WRI didn't expect it to be good or bad, as I just bought it for a tes...Read More - Fits:
- YAMAHA
- YAMAHA
The shape is completely different from the OEM Blinker relayJust an Universal Blinker Relay from Made in TaiwanI'm using it as a bridge until the OEM Blinker relay is repairedRead More - Fits:
- YAMAHA MATE
- YAMAHA MATE90
- YAMAHA NewsMATE V50N
- YAMAHA YB-1
- YAMAHA YB50
- ...and more.
Attached to 12vGORILLA. This may be bright! Recommendation absolute number here if NORMAL's pitch dark light and Watt number do not change. I do not understand the durability yet ...Read More - Fits:
- HARLEY-DAVIDSON FLSTFB FATBOY LO [Fat Boy Low] American type.
- HARLEY-DAVIDSON FLSTS HERITAGE SPRINGER [Heritage Springer] American type.
- HARLEY-DAVIDSON FXLR DYNA LOWRIDER [Dyna Lowrider] American type
- HARLEY-DAVIDSON FXSTC SOFTAIL CUSTOM [Softail Custom] American Type
- HARLEY-DAVIDSON FXSTD SOFTAIL DEUCE [Softail Deuce] -I American type.
- ...and more.
shape - Waterproof measures were satisfactory. In the Valve with attached ... There was a description of the item saying, but the attached Valve did not blink from the beginning. After switching to Va...Read More - Fits:
- MOTOGUZZI Griso850
- MOTOGUZZI Rosso Scura
- MOTOGUZZI V11 LeMans
- PIAGGIO X9 250
- BENELLI ADIVA125
- ...and more.
Compared to OEM, White has become stronger and brighter.It's about 20 minutes working time.Giving greed ,,,Since it is not an LED, if it is a little cheaper ,,,,Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING