71 Reviews View type:
Fits:- KAWASAKI ZXR250R 89-00
- KAWASAKI ZX-4 88
- KAWASAKI ZX-10R 04
- KAWASAKI Z400GP 82
- KAWASAKI ZrX1200ZrX1200 DAEG 09-15
- ...and more.
It looks exactly like the original counterpart from ZXR250. Fits perfectly and bleeds very easily. Braking feels firm and solid. Read More- Fits:
- KAWASAKI ZXR250R 89-00
- KAWASAKI ZX-4 88
- KAWASAKI ZX-10R 04
- KAWASAKI Z400GP 82
- KAWASAKI ZrX1200ZrX1200 DAEG 09-15
- ...and more.
I'm very happy with the product. It's not easy to find other aftermarket replacement for my ZXR250 and this one is pretty much like the original. Only difference is the oil reservoir, being shaped hig...Read More - Fits:
- KAWASAKI ZXR250R 89-00
- KAWASAKI ZX-4 88
- KAWASAKI ZX-10R 04
- KAWASAKI Z400GP 82
- KAWASAKI ZrX1200ZrX1200 DAEG 09-15
- ...and more.
Easy bleeding during installation . Upgraded from 11mm to 14mm axial. Love the lever feels. Installed on Yamaha Vixion-R 155 . Read More - Fits:
- YAMAHA TW 200E 91 (Models 2JL0
- 4CS1
- 4CS2
- 4CS3
- 4CS5
- ...and more.
I put Kijima blade breeder dust cap on my Ducati StreetFighter 1098 and Hayabusa 1300R replacement for stock cap (Hayabusa with Brembo caliper). The stock cap is easy to lose when repalce bracke fruid...Read More - Fits:
- KAWASAKI ZXR250R 89-00
- KAWASAKI ZX-4 88
- KAWASAKI ZX-10R 04
- KAWASAKI Z400GP 82
- KAWASAKI ZrX1200ZrX1200 DAEG 09-15
- ...and more.
2010년식 GSX-1250FA 순정 마스터 실린더 대용으로 설치하였습니다. 피팅은 완벽하게 잘맞고, 브레이크 조작감도 순정과 동일합니다.
다만, 브레이크액 리저브 탱크를 핸들에 고정시키는 볼트는 동봉되지 않아서 따로 구매해야 합니다. 나사산의 피치가 맞는 것을 찾는데 여러번의 시행착오를 겪었습니다. 제품은 매우 만족합니다.Read More - Fits:
- YAMAHA TW 200E 91 (Models 2JL0
- 4CS1
- 4CS2
- 4CS3
- 4CS5
- ...and more.
我的摩托车是YAMAHA NMAX155，我在上次更换刹车油的时候把原厂的放空气橡皮冒弄坏了一直没有地方能买到，直到我在webike看到这个KIJIMA 放空气螺丝橡皮盖，这是一款通用的配件，适合大部分摩托车，红色的还比较好看。Read More - Fits:
- KAWASAKI ZXR250R 89-00
- KAWASAKI ZX-4 88
- KAWASAKI ZX-10R 04
- KAWASAKI Z400GP 82
- KAWASAKI ZrX1200ZrX1200 DAEG 09-15
- ...and more.
I rebuild my bike up. There were a lot of Brake Master Cylinder on the market but I was hesitant because I was dubious from their manufacturer. I found this online for my Honda Bros NT400J 1988. I'm h...Read More - Fits:
- YAMAHA XJ900S 02 [Type:WF].
- YAMAHA XJ900S SP 02 [Type:WF].
- YAMAHA SR400 01-21 [Type:F].
- YAMAHA BOLT C-spec 14-21 [Type:F] ABS vehicle shim installed at the same time
- YAMAHA SCR950 17 [Type:F].
- ...and more.
Brake dust is more common than OEMs.Other than that, no complaints.Read More - Fits:
- YAMAHA XVS650AT V-Star Silverado 03-10 R/RC
- S/SC
- T/TC
- V/VC
- W/WC
- ...and more.
It is an SR400Final edition and has a lot of OEMPad Dust, which is decreasing fast, so I was torn between DAYTONA's Golden Kai and Vesra, but I decided to go with Vesra, which looks more OEM.I don't k...Read More - Fits:
- YAMAHA grandmajesty250 [grandmajesty]. (SG15J)
- YAMAHA MAJESTY250 [Majesty]. (4D9)
- YAMAHA
- YAMAHA
- YAMAHA
[How is it used?BALI was shaved and gutted with Double-sided Tape!Was the one you received as per Image?Yes, sir!Was the installation difficult?It was very easy!How was your experience with it?Once in...Read More - Fits:
- YAMAHA TW 200E 91 (Models 2JL0
- 4CS1
- 4CS2
- 4CS3
- 4CS5
- ...and more.
Great product and quick delivery a pleasure to deal with, highly recommend. Great service from Webike Japan the product arrived to Australia in a few days, very happy!Read More - Fits:
- YAMAHA TW 200E 91 (Models 2JL0
- 4CS1
- 4CS2
- 4CS3
- 4CS5
- ...and more.
I used it on my DAYTONA air breeder, but it's too loose. I don't think it will come off while driving, but it's loose enough to prevent dust and dirt. The OEM breeder is not as loose as the DAYTONA, b...Read More - Fits:
- YAMAHA XJ900S 02 [Type:WF].
- YAMAHA XJ900S SP 02 [Type:WF].
- YAMAHA SR400 01-21 [Type:F].
- YAMAHA BOLT C-spec 14-21 [Type:F] ABS vehicle shim installed at the same time
- YAMAHA SCR950 17 [Type:F].
- ...and more.
This is a replacement for OEM Brake Pads.Golden Pad for peace of mind.Read More - Fits:
- KAWASAKI ZXR250R 89-00
- KAWASAKI ZX-4 88
- KAWASAKI ZX-10R 04
- KAWASAKI Z400GP 82
- KAWASAKI ZrX1200ZrX1200 DAEG 09-15
- ...and more.
In order to install the brembo 4Pot, the capacity of the OEMMASTER becomes insufficient and "Parenthesis is somehow good", so it was introduced. (Lol) wwwThere is no interference to Cowl because Separ...Read More - Fits:
- YAMAHA BOLT 14-21 [Type:F] ABS vehicle shim installed at the same time
- YAMAHA XVS1300CB 12 [Type:WF].
- YAMAHA VIRAGO400 XV400 94 [Type:F].
- YAMAHA XJ900S SP 02 [Type:WF].
- YAMAHA XV1600 R100 ROADSTER 99-13 [Type:WF].
- ...and more.
As TitleThe strength of the brake lever can be controlled by the strength of the grip on the brake lever.FeedBack is easy to understand in the Control performance until it locks.In addition, Attack to...Read More - Fits:
- YAMAHA XVS950CUD-A BOLT 19-21 K Front Qty:1 Caliper (BS5M)
- YAMAHA Grand Majesty 04-06 S， T， V Front Qty:1 Caliper YP250G
- YAMAHA Zeal 91-92 FZX250 B、D Front Qty:1 caliper
- YAMAHA XVZ1300TFS Venture MM Limited Edition 00 M Front Number of units:1 caliper *2 sets required
- YAMAHA XVZ1300TFS Royal Star Venture S 08-15 X
- ...and more.
I use this product for SR400. The Brake Pads installed on the new car had been worn out after 7000km, so I replaced them with this product.Effectiveness and controllability are almost the same as OEM....Read More - Fits:
- KAWASAKI Z400GP 82
- KAWASAKI ELIMINATOR 400 88-89 CX
- KAWASAKI ELIMINATOR 400 88-89 C1
- KAWASAKI NINJA400 (2014-) 14-15
- KAWASAKI Z400FX/Z400J 79-82 W-Disk
- ...and more.
I bought this product to replace the assembly because the brake fluid does not stop leaking even though I replaced the inner kit of the master cylinder. 14mm piston outer diameter, silver lever color,...Read More - Fits:
- YAMAHA BOLT 14-21 [Type:F] ABS vehicle shim installed at the same time
- YAMAHA XVS1300CB 12 [Type:WF].
- YAMAHA VIRAGO400 XV400 94 [Type:F].
- YAMAHA XJ900S SP 02 [Type:WF].
- YAMAHA XV1600 R100 ROADSTER 99-13 [Type:WF].
- ...and more.
I installed this Red Pad on my SRV250 because it is a reliable product, and it is just right for touring.Read More - Fits:
- YAMAHA BOLT 14-21 [Type:F] ABS vehicle shim installed at the same time
- YAMAHA XVS1300CB 12 [Type:WF].
- YAMAHA VIRAGO400 XV400 94 [Type:F].
- YAMAHA XJ900S SP 02 [Type:WF].
- YAMAHA XV1600 R100 ROADSTER 99-13 [Type:WF].
- ...and more.
Installed on GRAND MAJESTY. It came to stop well.Read More - Fits:
- KAWASAKI Z400GP 82
- KAWASAKI ELIMINATOR 400 88-89 CX
- KAWASAKI ELIMINATOR 400 88-89 C1
- KAWASAKI NINJA400 (2014-) 14-15
- KAWASAKI Z400FX/Z400J 79-82 W-Disk
- ...and more.
There is dissatisfaction with BrakeTouch of W800, and for the improvement of Touch, I wanted to use Master to improve Touch I bought it to change the piston size of Cylinder, and the appearance is alm...Read More
![NISSIN [표준 레버] 브레이크 마스터 실린더 키트 [가로형 14mm/탱크 분리식]](http://global-fs.webike-cdn.net/catalogue/images/105373/61743_TS.jpg)
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING