
Fits: YAMAHA NMAX155 [V1/V2], YAMAHA NVX125 [V1/V2], YAMAHA NVX155 [V1/V2], YAMAHA AEROX125 [V1/V2], YAMAHA CYGNUS Griffith (6-inch)[Taiwan specification].
This tools introduce said that can be work for 24mm collar. But I can't use the 24mm oem collar put inside the tools.So I use the vernier scale to to measure that.The tool entrance side diameter only 23.5-23.6mm... This tools is expensive that make me disappointed.. Because I need modify to make it work.. View Detail

Fits: YAMAHA BirdCity155 (SG37J)All BB8 models, YAMAHA NMAX155 (SG50J)All BV4 models, YAMAHA NMAX155 (SG66J)BBD6, YAMAHA NMAX155 (SG66J)BBD2, YAMAHA MAJESTYS (SG52J)2LD All models
Used on Initial ModelBirdCity125.
Belt replacement and roller replacement were done at the same time.
I only bought it at the same time because it appeared in the product list of the drive system, but as the product description says, it is a consumable part, so it is indeed Material:If the drive system is sliding on plastic, wear is inevitable, so if you are replacing the drive system, you should purchase this as well.
While the OEM is in Black, this one is in Green, which is easy to see.
After replacing the Belt, Roller, and Slider, the start is smoother.View Detail

Fits: YAMAHA CYGNUSSR All years (SE44J)1YP, YAMAHA CYGNUSSR All Years (SE12J)5UA, YAMAHA CYGNUSSR All years (SE44J)28S, YAMAHA MAJESTY125 , YAMAHA BWS125 5S9
Used on Initial ModelBirdCity125.
The vehicle was purchased used and had a mileage of over 16,000 km, including my own, and the Belt Trip = Odo, so I decided to replace it at the same time as the Belt replacement.
I checked on the Net and found that the OEM weight roller of the BirdCity125 is 10 g. I was not particularly dissatisfied with the performance of the OEM, so I chose the 10 g weight roller, which is the same as the OEM.
The removed OEMRoller showed that 1pc. out of 6 had minor wear.
If the OEMRoller had been used as is, wear would have continued and other Rollers would have worn out.
Not only the Belt, but also the Roller will probably deteriorate and may need to be replaced at the same time.
The OEM Product was worn out before the replacement, but after the replacement, I feel that the movement at startup is smoother.
I also changed the oil and the belt, so perhaps it is just my imagination, but the fuel consumption is a little better than before.View Detail

Fits: YAMAHA BirdCity155 (SG37J)All BB8 models, YAMAHA NMAX155 (SG50J)All BV4 models, YAMAHA NMAX155 (SG66J)BBD6, YAMAHA NMAX155 (SG66J)BBD2, YAMAHA MAJESTYS (SG52J)2LD All models
Since it is an inexpensive part, we did not use it all the time and replaced it with a new one.
It was installed without any problems at all.View Detail

Fits: YAMAHA BirdCity155 (SG37J)All BB8 models, YAMAHA NMAX155 (SG50J)All BV4 models, YAMAHA NMAX155 (SG66J)BBD6, YAMAHA NMAX155 (SG66J)BBD2, YAMAHA MAJESTYS (SG52J)2LD All models
It seems that most of the Motorcycle shops near me do not stock Scooter parts. Webike has a large selection of parts and you can choose the part that best fits your motorcycle. This time I chose K/PIT Slider Set. Now it's easy to ride.View Detail

Fits: YAMAHA CYGNUSSR All years (SE44J)1YP, YAMAHA CYGNUSSR All Years (SE12J)5UA, YAMAHA CYGNUSSR All years (SE44J)28S, YAMAHA MAJESTY125 , YAMAHA BWS125 5S9
At the time of one year inspection, I was also concerned about Belt and Pulley, and when I had a look at them at a local motorcycle shop, they said that there was nothing wrong, and by the way, if I had opened the Case, it was recommended to replace the weight roller because it was inexpensive and changed the characteristics of driving. I think it was 2 gram lighter than the OEM one, but I got it replaced. Sure enough, the start became sharp and the driving became pleasantly quick. Acceleration is a little better and it climbs hills quite nicely. There is no deterioration in fuel economy so far. I'm glad I made the change.View Detail