SUZUKI TU250X (ST250): Handlebars

Save for later
RISE CORPORATION Handlebar STREETFIGHTER On-road TypeMODEL: T05Z9990058GLPoint: 27 pt16.99~ USD17.75 USDSave ~0.81 USD ( Up to 4% )
[Material] ALLOY6061 aluminum alloy

[Size]
・Width: Approx. 755mm
・Height: Approx. 100mm
・Pull: Approx. 80mm
・Clamp diameter: Approx. 22.2mm
・Grip diameter: Approx. 22.2mm
YAMAHA FZ8
YAMAHA FZ6
YAMAHA XJR400
SUZUKI GSX-R600
YAMAHA SR400
YAMAHA FZ1
Save for later
GOODS KILLERS Bar Wire SetMODEL: G9-01119Point: 138 pt88.37 USD95.76 USDSave 7.4 USD ( 8% )
[Set components]
・KILLERS BAR chrome (G1-00005) x 1
・Brake Hose Black 1100mm (G9-00097) x 1
・Throttle wire pull SIZE-B (99-63246A) x 1
・Throttle wire return SIZE-B (99-63247A) x 1
・Clutch wire SIZE-C (99-63140B) x 1
SUZUKI ST250 -07
Save for later
HURRICANE Flat Continental Type-2 Φ7/8-Inches Handlebar SteelMODEL: HB0062B-01Point: 34 pt21.5 USD23.08 USDSave 1.58 USD ( 7% )
4.3 (18 Reviews)
Handlebar color: Black

[Handlebar specification]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
・Stock cables and hoses can be installed on as is

[handlebar size]
Total height: 63mm
Full width: 660mm
Effective width of holder installation part: 135mm
Pullback size: 160mm
Insertion angle: 32 degrees
Forward leaning angle: 60 degrees
HONDA VTR250 03-07 MC33 (102201-)*Processing to drill switch hole|*Essential side cap (for 18mm I.D.)|*Mount the bar end up.
HONDA VTR250 09-12 MC33 (1300001-)(FI car) *Processing to drill switch hole is required|* Required side cap (for 18mm diameter)
YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
YAMAHA SR400 88-00 (CV carburetor) *Processing to drill switch holes is required
YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
Save for later
HURRICANE Flat Continental Type-4 Φ7/8-Inches Handlebar SteelMODEL: HB0064C-01Point: 37 pt23.59 USD
4.0 (7 Reviews)
[Handlebar color] Chrome plating

[Handlebar specification]
・Outer diameter Φ22.2mm / inner diameter Φ18mm
・Stock cables and hoses can be installed on as is

[handlebar size]
Total height: 35mm
Full width: 670mm
Effective width of holder installation part: 120mm
Pullback size: 130mm
Insertion angle: 20 degrees
Forward leaning angle: 45 degrees
YAMAHA XJR400R 01-07 (RH02J)*Processing of switch hole drilling required|*Side cap (for inner diameter φ18mm)|*Please install the bar end upward.
YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
YAMAHA TW200E -99 (drum brakes)
YAMAHA TW200 -99 (drum brakes)
YAMAHA SR400 88-00 (CV cab models) *Processing of switch hole required
Save for later
HURRICANE Forward Continental Type-1 Φ7/8-Inches Handlebar SteelMODEL: HB0065B-01Point: 43 pt27.61 USD
4.7 (7 Reviews)
Handlebar color: Black

[Handlebar specification]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
・Stock cables and hoses can be installed on as is

[handlebar size]
Total height: 50mm
Full width: 680mm
Effective width of holder installation part: 120mm
Pullback size: 145mm
Insertion angle: 47 degrees
Forward leaning angle: 140 degrees
YAMAHA SR500 88-00 (CV carburetor) *Processing to drill switch holes is required
KAWASAKI ZEPHYR400 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
HONDA CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID)
HONDA CB400SF 99-07 NC39 VTEC *Processing of the switch hole is required|* Required side cap (for 18mm ID)
Save for later
HURRICANE Condor Φ7/8" Handlebar SteelMODEL: HB0020C-01Point: 46 pt29.76 USD32.05 USDSave 2.29 USD ( 7% )
4.6 (31 Reviews)
Handlebar color: Chrome plated

[Handlebar specification]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
・Stock cables and hoses can be installed on as is

[handlebar size]
Total height: 80mm
Full width: 645mm
Effective width of holder installation part: 165mm
Pullback size: 145mm
Insertion angle: 45 degrees
Forward leaning angle: 120 degrees
HONDA CB1300SUPER BOLDOR 05-09 *Processing of switch hole required|* Required side cap (for 18mm ID)
HONDA CB1300SUPER BOLDOR 10-12 *Processing of switch holes required|* Required side cap (for 18mm ID)
HONDA CB400SS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
HONDA CB400SF -98 NC31 *Processing of switch hole required|* Required side cap (for 18mm ID)
HONDA CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID)
HONDA FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable.
Save for later
HURRICANE Continental Type 1 Φ7/8" Handlebar SteelMODEL: HB0001B-01Point: 39 pt24.85 USD26 USDSave 1.15 USD ( 4% )
4.5 (8 Reviews)
Handlebar color: Black

[Handlebar specification]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
・Stock cables and hoses can be installed on as is

[handlebar size]
Total height: 80mm
Full width: 730mm
Effective width of holder installation part: 130mm
Pullback size: 110mm
Insertion angle: 21 degrees
Forward leaning angle: 85 degrees
HONDA FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable.
HONDA CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID)
HONDA CB400SUPER BOLDOR 05-07 NC39 *Processing of switch hole required|* Required side cap (for 18mm diameter)
HONDA CB400SF 99-07 NC39 VTEC *Processing of the switch hole is required|* Required side cap (for 18mm ID)
HONDA CB400SF 99-07 NC39 vtec III*Processing of switch hole drilling required|*Side cap required (for inner diameter 18mm)
HONDA CB400SF 99-07 NC39 VTEC II* requires drilling of switch hole|* requires side cap (for 18mm ID)
Save for later
HURRICANE Flat Continental Type-1 Φ7/8-Inches Handlebar SteelMODEL: HB0061B-01Point: 37 pt23.52 USD
4.6 (8 Reviews)
Handlebar color: Black

[Handlebar specification]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
・Stock cables and hoses can be installed on as is

[handlebar size]
Total height: 50mm
Full width: 675mm
Effective width of holder installation part: 135mm
Pullback size: 135mm
Insertion angle: 32 degrees
Forward leaning angle: 105 degrees
KAWASAKI 250TR -06 *Requires switch hole drilling|* Requires changing the orientation of the brake banjo and throttle holder.
KAWASAKI W400 *Required Switch Hole Drilled
KAWASAKI ZRX400 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
KAWASAKI ZRX400II *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
KAWASAKI ESTRELLARSCustom 96-99 *Processing of switch hole required|* Required side cap (for 18mm ID)
KAWASAKI ZEPHYR400 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
Save for later
HURRICANE Condor Φ7/8" Handlebar SteelMODEL: HB0020B-01Point: 51 pt32.78 USD34.61 USDSave 1.83 USD ( 5% )
4.6 (31 Reviews)
Handlebar color: Black

[Handlebar specification]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
・Stock cables and hoses can be installed on as is

[handlebar size]
Total height: 80mm
Full width: 645mm
Effective width of holder installation part: 165mm
Pullback size: 145mm
Insertion angle: 45 degrees
Forward leaning angle: 120 degrees
HONDA FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable.
HONDA MONKEY 09-12 (AB27-1900001-)(FI)(FI cars)* Requires Top Bridge H30 Holder or MONKEY Handle Holder|* Requires drilling of switch hole
HONDA HORNET250 *Need to drill switch hole
HONDA APE 50 08-12 (FI Drum Brake) *Processing of switch holes is required
KAWASAKI W800 *Need to drill switch hole |*It is necessary to change the clutch cable.
KAWASAKI W400 *Required Switch Hole Drilled
Save for later
HURRICANE Swallow Φ7/8" Handlebar SteelMODEL: HB0017C-01Point: 53 pt33.91 USD
4.4 (18 Reviews)
Handlebar color: Chrome plated

[Handlebar specification]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
・Stock cables and hoses can be installed on as is

[handlebar size]
Total height: 35mm
Full width: 645mm
Effective width of holder installation part: 155mm
Pullback size: 130mm
Insertion angle: 43 degrees
Forward leaning angle: 167 degrees
HONDA FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable.
HONDA CB400SS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
HONDA VTR250 03-07 MC33 (1020001-)*Processing of switch hole required|* Required side cap (for 18mm ID)
HONDA NC700S 12 (Excluding ABS and DCT vehicles)*Processing to drill switch hole required|*Side cap (for inner diameter Φ18mm)|*The direction of the brake banjo needs to be changed.
HONDA FTR223 (with side numbers) * Requires modification of the clutch cable and choke cable.
YAMAHA TW200 -99 (drum brakes)
Save for later
HURRICANE Continental Type 1 Φ7/8" Handlebar SteelMODEL: HB0001C-01Point: 35 pt22.5 USD23.52 USDSave 1.03 USD ( 4% )
4.5 (8 Reviews)
Handlebar color: Chrome plated

[Handlebar specification]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
・Stock cables and hoses can be installed on as is

[handlebar size]
Total height: 80mm
Full width: 730mm
Effective width of holder installation part: 130mm
Pullback size: 110mm
Insertion angle: 21 degrees
Forward leaning angle: 85 degrees
HONDA CB400SF NC31 *Processing of switch hole drilling required|*Side cap required (For inner diameter Φ18mm)
HONDA CB400SS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
HONDA CB1300SUPER BOLDOR 10-12 *Processing of switch holes required|* Required side cap (for 18mm ID)
HONDA CB1300SUPER BOLDOR 05-09 *Processing of switch hole required|* Required side cap (for 18mm ID)
HONDA CB1300 SF 03-09 *Processing of switch holes required|* Required side cap (for 18mm ID)
YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
Save for later
HURRICANE Flat Continental Type-2 Φ7/8-Inches Handlebar SteelMODEL: HB0062C-01Point: 35 pt22.5 USD23.52 USDSave 1.03 USD ( 4% )
4.3 (18 Reviews)
Handlebar color: Chrome plated

[Handlebar specification]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
・Stock cables and hoses can be installed on as is

[handlebar size]
Total height: 63mm
Full width: 660mm
Effective width of holder installation part: 135mm
Pullback size: 160mm
Insertion angle: 32 degrees
Forward leaning angle: 60 degrees
HONDA FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable.
HONDA FTR223 (with side numbers) * Requires modification of the clutch cable and choke cable.
HONDA CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID)
HONDA CB400SUPER BOLDOR 05-07 NC39 *Processing of switch hole required|* Required side cap (for 18mm diameter)
HONDA CB400SF 99-07 NC39 VTEC *Processing of the switch hole is required|* Required side cap (for 18mm ID)
HONDA CB400SF 99-07 NC39 VTEC II* requires drilling of switch hole|* requires side cap (for 18mm ID)
Save for later
HURRICANE Forward Continental Type-1 Φ7/8-Inches Handlebar SteelMODEL: HB0065C-01Point: 37 pt23.99 USD
4.7 (7 Reviews)
Handlebar color: Chrome plated

[Handlebar specification]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
・Stock cables and hoses can be installed on as is

[handlebar size]
Total height: 50mm
Full width: 680mm
Effective width of holder installation part: 120mm
Pullback size: 145mm
Insertion angle: 47 degrees
Forward leaning angle: 140 degrees
SUZUKI GRASS TRACKER Big Boy -08-8(Carburetor)*Drilling of switch hole is required|*You can use stock side cap. |*It is necessary to change the direction of the throttle cable
clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
YAMAHA XJR400R 01-07 (RH02J)*Processing of switch hole drilling required|*Side cap required (for inner diameter 18mm)
YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
YAMAHA TW200 -99 (drum brakes)
Save for later
HURRICANE BM Continental Type 3 Φ7/8 Inch Handlebar SteelMODEL: HB0041C-01Point: 35 pt22.56 USD23.59 USDSave 1.03 USD ( 4% )
4.9 (9 Reviews)
Handlebar color: Chrome plated

[Handlebar specification]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
・Stock cables and hoses can be installed on as is

[handlebar size]
Total height: 80mm
Full width: 680mm
Effective width of holder installation part: 125mm
Pullback size: 155mm
Insertion angle: 28 degrees
Forward leaning angle: 65 degrees
HONDA MONKEY 84-07 (1600008-/AB27-1000001-1899999)* Requires Top Bridge H30 Holder or MONKEY Handle Holder
HONDA MONKEY 09-12 (AB27-1900001-)(FI)(FI cars)* Requires Top Bridge H30 Holder or MONKEY Handle Holder|* Requires drilling of switch hole
HONDA HORNET250 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
HONDA APE 50 08-12 (drum brake) *Processing of switch holes is required
HONDA APE 100 -12 (drum brake)*APE100 (09-) requires drilling of switch holes.
HONDA APE 50 -07|08 (Carburetor) *Processing of switch hole is required only for APE100 (09-)
Save for later
HURRICANE Swallow Φ7/8" Handlebar SteelMODEL: HB0017B-01Point: 49 pt31.56 USD32.05 USDSave 0.49 USD ( 2% )
4.4 (18 Reviews)
Handlebar color: Black

[Handlebar specification]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
・Stock cables and hoses can be installed on as is

[handlebar size]
Total height: 35mm
Full width: 645mm
Effective width of holder installation part: 155mm
Pullback size: 130mm
Insertion angle: 43 degrees
Forward leaning angle: 167 degrees
KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
KAWASAKI ZEPHYR400 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
KAWASAKI W400 *Required Switch Hole Drilled
KAWASAKI 250TR -06 *Processing of switch holes required
HONDA MONKEY 84-07 (Z50J-1600008-|AB27-1000001-1899999)*With Top Bridge H30 Holder or MONKEY Handle Holder required
SUZUKI GSX400 05-07 GK7CA *Processing of the switch hole is required|* You can use the normal side cap.
Save for later
HURRICANE BM Continental Type 3 Φ7/8 Inch Handlebar SteelMODEL: HB0041B-01Point: 34 pt21.9 USD23.08 USDSave 1.17 USD ( 5% )
4.9 (9 Reviews)
Handlebar color: Black

[Handlebar specification]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
・Stock cables and hoses can be installed on as is

[handlebar size]
Total height: 80mm
Full width: 680mm
Effective width of holder installation part: 125mm
Pullback size: 155mm
Insertion angle: 28 degrees
Forward leaning angle: 65 degrees
HONDA CB1300SUPER BOLDOR 10-12 *Processing of switch holes required|* Required side cap (for 18mm ID)
HONDA CB1300SUPER BOLDOR 05-09 *Processing of switch hole required|* Required side cap (for 18mm ID)
HONDA CB1300 SF 03-09 *Processing of switch holes required|* Required side cap (for 18mm ID)
HONDA CB1100 -12 SC65 (Uphan model)
HONDA APE 50 -07|08 (Carburetor)*APE100 (09-) only
HONDA APE 50 08-12 (FI Drum Brake) *Processing of switch holes is required

4.5 ( 126 Reviews )

Top Products
Customer Reviews

Product details.

HURRICANE BM Continental Type 3 Φ7/8 Inch Handlebar Steel

I wanted a narrower lower handlebar for my SR500. This one is economical, fits great and the chrome is top quality. I will be considering the Hurricane brand from now on when shopping for handleb...
Read More
Product details.

HURRICANE BM Continental Type 3 Φ7/8 Inch Handlebar Steel

Item ordered on 24th. Mailed on 25th. Reached Singapore on 27th. Japan efficiency . Itwm bubble wrapped and boxed. No damages .
Read More
Product details.

HURRICANE Swallow Φ7/8" Handlebar Steel

Timing was not available for Tommaselli, so I bought it in time

The looks and Position are great, but … it won't pass inspection. w
Read More
Product details.

HURRICANE Condor Φ7/8" Handlebar Steel

[How is it used?
I changed XJR400R from OEM Handlebar to this Condor Handle.

Was the one you received as per Image?
The precision of the construction is good and the shape is cool. Read More
Product details.

HURRICANE Continental Type 1 Φ7/8" Handlebar Steel

Not a lot you can say about handlebars. They look good and seem to be of a high quality, time will tell. However there are a few points worth mentioning. There is a manufacturers sticker where th...
Read More
Product details.

HURRICANE Condor Φ7/8" Handlebar Steel

Separate Handlebars were out of stock, so I put the Condor Handle on backwards and tilted it forward. It is very forward leaning and narrow, so I think it will be strange to use Large until I get...
Read More
Product details.

HURRICANE Continental Type 1 Φ7/8" Handlebar Steel

I replaced Handlebar to immeChain.
The height of the handlebar is now much lower.
It's so much easier to ride.
Read More
Product details.

HURRICANE BM Continental Type 1 Φ7/8 Inch Handlebar Steel

I put it on my st250, but the OEM handlebar made me look awkward when riding.
The quality is not luxurious, but it feels solid!
Read More
Product details.

HURRICANE Flat Continental Type-2 Φ7/8-Inches Handlebar Steel

This is a change from Plating of the same type.

On the LeftGrip side, there is a paper seal with the product number, ManufacturerMain and product name, which is still difficult to remove.<...
Read More
Product details.

HURRICANE Flat Continental Type-4 Φ7/8-Inches Handlebar Steel

[How is it used?
I wanted to replace the Grip and Bar End while I was doing the Lever replacement, so I replaced the Handlebar too!

Was the one you received as per Image?
While sligh...
Read More

SUZUKI TU250X (ST250) Handlebars

Recently viewed products