- Fits:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...and more.
I've been sticking with the Tokico 6 pods. This time I adopted CaliperOverhaul and baked paint instead of OEM. I think it's a good corrosion protection. I've heard that some people use seal tape to pr...Read More - Fits:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...and more.
The OEM Bleeder Bolt is always going to Rust and Decay, so this Material:It is safer to replace it with Stainless Steel.Be sure to bleed the air and refill the fluid in the MASTER after replacement.Th...Read More - Fits:
- KAWASAKI EX-4 94-97 Type:F
- KAWASAKI GPX750R 86-87 Type:R
- KAWASAKI GPX750R 86-87 Type:WF
- KAWASAKI GPZ400R 89 Type:R
- KAWASAKI GPZ400S 86-87 Type:F
- ...and more.
I bought it because of the low price. The accuracy of the replacement is perfect. The impression when running is necessary enough, and it works normally to the extent that it is taken aback. In town r...Read More - Fits:
- KAWASAKI ZZR400 90-92 [Used in]Rear
- KAWASAKI ELIMINATOR 400 94-95 (D) [part used]Front
- KAWASAKI ZEPHYR1100 92-06 [Used in]Rear
- KAWASAKI ZEPHYR1100 RS 96-03 [Used in]Rear
- KAWASAKI ZEPHYR400 89-92 [Used point]Front double disk
- ...and more.
As for myself. Stability. This is the Red Pad of theI use them on both my GPZ900R and KLX250.It's always been Red, so I can't compare it to other products.It's usually good.I think I'll keep using it ...Read More - Fits:
- KAWASAKI ZZR400 90-92 [Used in]Rear
- KAWASAKI ELIMINATOR 400 94-95 (D) [part used]Front
- KAWASAKI ZEPHYR1100 92-06 [Used in]Rear
- KAWASAKI ZEPHYR1100 RS 96-03 [Used in]Rear
- KAWASAKI ZEPHYR400 89-92 [Used point]Front double disk
- ...and more.
I've been using Red Pad for a long time, but I've always had a lot of Dust, so I have to clean the Caliper often.Tension goes up to the red color seen a little from Caliper.Read More - Fits:
- KAWASAKI ZZR400 90-92 [Used in]Rear
- KAWASAKI ELIMINATOR 400 94-95 (D) [part used]Front
- KAWASAKI ZEPHYR1100 92-06 [Used in]Rear
- KAWASAKI ZEPHYR1100 RS 96-03 [Used in]Rear
- KAWASAKI ZEPHYR400 89-92 [Used point]Front double disk
- ...and more.
When I resurrected my GPZ900R A7 which had been dormant for a while, I bought a set of front and rear parts. When I was looking for the cheapest possible, I found the product description's table of 'L...Read More - Fits:
- KAWASAKI ZZR400 90-92 [Used in]Rear
- KAWASAKI ELIMINATOR 400 94-95 (D) [part used]Front
- KAWASAKI ZEPHYR1100 92-06 [Used in]Rear
- KAWASAKI ZEPHYR1100 RS 96-03 [Used in]Rear
- KAWASAKI ZEPHYR400 89-92 [Used point]Front double disk
- ...and more.
I've been using Red Pad for a long time.I love the Red Pad that you can see through the gaps in the Caliper. LOL!We plan to continue with the Red Pad in the future.Read More - Fits:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...and more.
I replaced a 2006 K7 OEM BreederValve with a fluid blotch in the OEM BreederValveIt is made of stainless steel and looks greatI don't know if seal tape is necessary, but just in caseRead More - Fits:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...and more.
No functional problemsIt's a hobby to change from OEM as it's not used very oftenThe front brake is compatibleI installed it on a non-compliant rear brake for a test run, but the Fluid leakedThe OEM h...Read More - Fits:
- KAWASAKI GPX250R 87 [Model]EX250F1 [FNO.]EX250F-008316 or later [Number of discs]Single [Where used]Front
- KAWASAKI GPX750R 87-88 [Model]ZX750F1/F2 [FNO.]ZX750F-018001 or later [Number of discs]Double [Location]Front
- KAWASAKI ZEPHYR750 91-99 [Model]ZR750C1/C2/C3/C4/C5/C6 [FNO.]ZR750C-000001 or later [Number of discs]Double [Where used]Front
- KAWASAKI ELIMINATOR400 94- [Model]ZL400D1/D2 [FNO.]ZL400A-015001 or later [Number of disc]Single [Where used]Front
- KAWASAKI BALIUS250 91-96 [Model]ZR250A1/A2/A3/A4/A5/A6 [FNO.]ZR250A-000001 or later [Number of discs]Single [Where used]Front
- ...and more.
Installed on a '95 Kawasaki EX-4Replacement from DAYTONA GoldenxPadI liked the DAYTONA from the Red Pad, but when I was riding the ZX-6R, I recommended It reminds me of the SBS Pad that was installedM...Read More - Fits:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...and more.
I used it in a Tokico 6-pot, and since the Screw was with me, I figured I could use it! Brake fluid leaked and it was Large Please be careful There is no problem in the productRead More - Fits:
- KAWASAKI GPX250R 87 [Model]EX250F1 [FNO.]EX250F-008316 or later [Number of discs]Single [Where used]Front
- KAWASAKI GPX750R 87-88 [Model]ZX750F1/F2 [FNO.]ZX750F-018001 or later [Number of discs]Double [Location]Front
- KAWASAKI ZEPHYR750 91-99 [Model]ZR750C1/C2/C3/C4/C5/C6 [FNO.]ZR750C-000001 or later [Number of discs]Double [Where used]Front
- KAWASAKI ELIMINATOR400 94- [Model]ZL400D1/D2 [FNO.]ZL400A-015001 or later [Number of disc]Single [Where used]Front
- KAWASAKI BALIUS250 91-96 [Model]ZR250A1/A2/A3/A4/A5/A6 [FNO.]ZR250A-000001 or later [Number of discs]Single [Where used]Front
- ...and more.
It is an exchange from RK's UA 70.The first thing I felt was Brake Pads, so it's not bad, but it looks dirty. I feel something so dirty.First of all I feel pretty tight with Touch.Early effect...Read More - Fits:
- KAWASAKI ZZR400 90-92 [Used in]Rear
- KAWASAKI ELIMINATOR 400 94-95 (D) [part used]Front
- KAWASAKI ZEPHYR1100 92-06 [Used in]Rear
- KAWASAKI ZEPHYR1100 RS 96-03 [Used in]Rear
- KAWASAKI ZEPHYR400 89-92 [Used point]Front double disk
- ...and more.
Reliable DAYTONARedPad can be Breaking with high braking property. Because the braking property is good, there are a lot of Pad powder, but it can not be helped !!!Let's say good to Rotor because ...Read More - Fits:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...and more.
Because it rusts as soon as iron, Material : I purchased Stainless Steel. We are solidly making details, we are satisfied with Large change. I am happy that it's a bit cheaper.Read More - Fits:
- SUZUKI
- SUZUKI
- SUZUKI VX800 90-93
- SUZUKI
- SUZUKI GSX250S KATANA [Katana] GJ76A 91
- ...and more.
Purchased for Replacement of AcrossOEM Product. Because it is not Replica, stop PingPower does not demand so much. It is the same as OEM Product, it can be used normally. Regarding durability, from no...Read More - Fits:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...and more.
【What made you decide the purchase?】OEM's RadarBolt was rotten w【How was it actually used?】Cool at One point【Mounting was difficult?】Just replace with OEM【Please tell me the installation point and...Read More - Fits:
- KAWASAKI ZX-10 88-90 [Used point]Front double disk
- KAWASAKI ZRX400II 95 [Where used] Front double disk
- KAWASAKI ZRX400 94-95 [Used point]Front double disk
- KAWASAKI KLE400 91-01 [Used point]Front
- KAWASAKI ZEPHYR750 90-06 [Used point]Front double disk
- ...and more.
As Pad was decreasing, I finally decided to exchange it. Oh, there is too much running in the summer, playing too much, the claim is amazing.. The budget is... Well, Golden is impossible, but non-Bran...Read More - Fits:
- KAWASAKI EX-4 94
- KAWASAKI ELIMINATOR400 95
- KAWASAKI ELIMINATOR400 94
- KAWASAKI BALIUS 96
- KAWASAKI BALIUS 95
- ...and more.
Since a Maintenance was not carried out at all after exchanging to the Golden pad, it removed. After running 9374 km, it still remains 4.6 mm.He is surprised. Since the Wheel also seldom became dirty ...Read More - Fits:
- SUZUKI Across 90-99 [Position/Number of discs] Front/Single disc [Compatibility
- SUZUKI WOLF125 91-99 [Position/Number of discs] Front/Single disc [Compatibility
- SUZUKI VX800 90 VX800 [Position/Number of discs] Front/Single disc [Compatibility
- SUZUKI SW-1 92 [Position/Number of discs] Front/Single disc [Compatibility
- SUZUKI GSX250S KATANA 91-99 SH [Position/Number of discs] Front/Single disc [Compatibility
- ...and more.
effectiveness when a Pedal is broken in is felt firmly and is strange -- also biting -- there is nothing and it is an effectiveness taste according to an input.
durability is an effectiveness taste m...Read More - Fits:
- KAWASAKI ELIMINATOR 400 94-95 (D) [part used]Front
- SUZUKI BANDIT250 90-94 [Where used] Front
- SUZUKI WOLF200 92 [Where used] Front
- SUZUKI WOLF125 91-99 [Used area]Front
- SUZUKI VX800 89-94 [Where used] Front
- ...and more.
since the pure Front Pat made from TOKICO exceeded the wear limit -- exchange -- since he likes that it is effective gradually, it is very good.
After still exchanging, it is running only 50 km, but ...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING