- Fits:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...and more.
A bit longer than intended for the front caliper. Maybe the pin I received is for the rear. But it fits properly on the front caliper anyway.Read More - Fits:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...and more.
today i change the rear brake rotor and overhaul the caliper. the brake pin has seriously rusted and damaged so i cleaning all the surface of caliper and (not changed caliper piston...and Oring) and l...Read More - Fits:
- YAMAHA YZF-R1 07-14 [Used in]Rear
- YAMAHA YZF-R6 03-10 [Used in]Rear
- YAMAHA YZF-R6S 06 [Used in]Rear
- SUZUKI V STROM 650 23 8BL-C733M
- YAMAHA YZF-R1 04-06 [Used in]Rear
- ...and more.
Compared to NORMAL, it is easier to Control, especially on the descent of mountain passes.It works well, with no problems under hard braking, but I think it seems to wear off quickly.That said, I thin...Read More - Fits:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...and more.
First, let me say that this is a special case based on a combination of several conditions.After cleaning the Caliper, I put it back together, tightened the pad pin, and was finishing up by tightening...Read More - Fits:
- HONDA CB1300SF 03-14 [Used in]Rear
- SUZUKI KATANA 19-21 [Where used]Rear
- SUZUKI GSX-S1000 22 (EK1AA) [part used]Rear
- SUZUKI GSX-S1000 16-21 (GT79B) [part used]Rear
- SUZUKI GSX-S1000 F 16-21 (GT79B) [part used]Rear
- ...and more.
[How is it used?For HORNET 900 Rear brakeWas the installation difficult?It's easy, but first-timers should do their research before doing it properly.How was your experience with it?It is not like Gol...Read More - Fits:
- SUZUKI V STROM 650 23 8BL-C733M
- YAMAHA YZF-R6S 06 [Used in]Rear
- YAMAHA YZF-R6 03-10 [Used in]Rear
- YAMAHA XSR900 16-20 [Used in]Rear
- YAMAHA YZF-R1 04-06 [Used in]Rear
- ...and more.
I always buy well on Webike. Fast delivery and perfect uploads are a plus. As a Suzuki fan, I really like it. Brake pad performance is better than OEM parts. I originally wanted to buy it in red, ...Read More - Fits:
- HONDA CB1300SF 03-14 [Used in]Rear
- SUZUKI KATANA 19-21 [Where used]Rear
- SUZUKI GSX-S1000 22 (EK1AA) [part used]Rear
- SUZUKI GSX-S1000 16-21 (GT79B) [part used]Rear
- SUZUKI GSX-S1000 F 16-21 (GT79B) [part used]Rear
- ...and more.
These products have a good caustic ratio. I'm satisfied with Daytona products. Especially the red color is excellent~~~Read More - Fits:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...and more.
For those who want to upgrade with OEM replacementIt's hard to lick, hard to decay, and also cool.Recommended for people who ride Honda motorcycles, but be careful with the length.Read More - Fits:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...and more.
I've been sticking with the Tokico 6 pods. This time I adopted CaliperOverhaul and baked paint instead of OEM. I think it's a good corrosion protection. I've heard that some people use seal tape to pr...Read More - Fits:
- SUZUKI BANDIT 1250S 12 ABS (Bandit) [GW72A] [Frame No.]GW72A-103878 or later ■Front double disc (2 sets of front discs are used)
- SUZUKI BANDIT 1250S 11 ABS (Bandit) [GW72A] [Frame No.]GW72A-103358 or later ■Front double disc (2 sets of front discs are used)
- SUZUKI BANDIT 1250S 09 ABS (Bandit) [GW72A] [Frame No.]GW72A-101301 or later ■Front double disc (2 sets of front discs are used)
- SUZUKI BANDIT 1250S 08 ABS (Bandit) [GW72A] [Frame No.]GW72A-100874 or later ■Front double disc (2 sets of front discs are used)
- SUZUKI BANDIT 1250S 07 ABS (Bandit) [GW72A] [Frame No.]GW72A-100001 or later ■Front double disc (2 sets of front discs are used)
- ...and more.
Front brake replacement for ZrX1200DAEGIt was a replacement for the OEM, but it was more of a reliable brake pad than an amazing effect.Read More - Fits:
- YAMAHA YZF-R1 07-14 [Used in]Rear
- YAMAHA YZF-R6 03-10 [Used in]Rear
- YAMAHA YZF-R6S 06 [Used in]Rear
- SUZUKI V STROM 650 23 8BL-C733M
- YAMAHA YZF-R1 04-06 [Used in]Rear
- ...and more.
I used it on the rear of my 2020 GSX-S1000.This is an impression based on comparison with OEMPad, Red Pad, etc. I felt the braking force was very strong compared to these. Compared to these, I felt th...Read More - Fits:
- SUZUKI V STROM 650 23 8BL-C733M
- YAMAHA YZF-R6S 06 [Used in]Rear
- YAMAHA YZF-R6 03-10 [Used in]Rear
- YAMAHA XSR900 16-20 [Used in]Rear
- YAMAHA YZF-R1 04-06 [Used in]Rear
- ...and more.
I am using it on my 2020 GSX-S1000 Rear.I think the braking force is about the same as the OEM Pad.I have used Red Pad and Golden Pad before, but this pad is not so much for braking power but for dece...Read More - Fits:
- HONDA CB1300SF 03-14 [Used in]Rear
- SUZUKI KATANA 19-21 [Where used]Rear
- SUZUKI GSX-S1000 22 (EK1AA) [part used]Rear
- SUZUKI GSX-S1000 16-21 (GT79B) [part used]Rear
- SUZUKI GSX-S1000 F 16-21 (GT79B) [part used]Rear
- ...and more.
good afternoon. I purchased these brake pads for my motorcycle HONDA CB1300SB (Super Bol D'or, CB1300S). Delivery to Russia came quickly enough (2 weeks). There was a track number for tracking the del...Read More - Fits:
- HONDA CB1300SF 03-14 [Used in]Rear
- SUZUKI KATANA 19-21 [Where used]Rear
- SUZUKI GSX-S1000 22 (EK1AA) [part used]Rear
- SUZUKI GSX-S1000 16-21 (GT79B) [part used]Rear
- SUZUKI GSX-S1000 F 16-21 (GT79B) [part used]Rear
- ...and more.
I used it on the rear of my 2020 GSX-S1000.The braking force is not a hard-hitting Type, but rather a Type that rises slowly as you step on it. When I stepped on it, the braking force was so strong th...Read More - Fits:
- SUZUKI GSX-R1000R For 17-18 rear brake master
- SUZUKI GSX-R600 11-13 For rear brake master
- SUZUKI GSX-R750 11 For rear brake master
- KAWASAKI ZX-10RR 17-19 For rear brake master
- KAWASAKI Ninja1000SX 20 For rear brake master
- ...and more.
I wanted to create a sense of unity with the front and master cylinder cap.I chose the Oil Filler Cap from the same series.I like the color of Black and Red, and the chic and high quality of the fashi...Read More - Fits:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...and more.
Rust resistant Material:Stainless SteelPad pin。It is a little bit longer for one push for Caliper, but it can be used as it is with OEM and replacement.Features easy maintenance and performance retent...Read More - Fits:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...and more.
The OEM Bleeder Bolt is always going to Rust and Decay, so this Material:It is safer to replace it with Stainless Steel.Be sure to bleed the air and refill the fluid in the MASTER after replacement.Th...Read More - Fits:
- HONDA XL400VTRANSALP 92 ND06 [Frame No.]ND06-1000001 or later [Use part]Caliper side
- HONDA ST1100ST1100 PAN EUROPEAN 00 [part used] Caliper side
- HONDA X4 97-00 SC38 [part used]Caliper side
- HONDA X4 97 SC38 [Frame No.]SC38-1000001 or later [Use part]Caliper side
- HONDA XL400VTRANSALP 91 ND06 [Frame No.]ND06-1000001 or later [Use part]Caliper side
- ...and more.
ZrX1200 DAEG OEMHydraulic Clutch Bleeder Bolt This Material:I replaced it with a Stainless Steel one. The OEM Bleeder Bolt is made of steel and will always rust over time, so it's best to replace it. ...Read More - Fits:
- SUZUKI SV1000 S 03-06
- SUZUKI RGV250 gamma 90-95
- SUZUKI RGV250 Gamma-SPII 90-92
- SUZUKI RGV250 gamma 88-89
- SUZUKI RGV250 Gamma-SP 91-93
- ...and more.
When compared to the Brake Pads of NORMAL, the difference in braking power and the touch at the beginning of the effect was immediately clear. I don't ride too much, but it's easy to handle on the str...Read More - Fits:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...and more.
Used for KLX125Compared to the OEM, the screw mountain part looked smaller, but I was able to install it without any problems.It's just the right length without the excess length that other people hav...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING