29 Reviews View type:
- Fits:
- SUZUKI GSX-R1100 Initial oil cooling (G
- H
- J)
- SUZUKI
- YAMAHA FZR1000 (3GM)
- ...and more.
I bought it after I saw it installed in a custom car of Pro shop. I didn't intend to customize BANDIT1200s, but after I put this Parts, I increased the number of popping. I'm going to the swamp.Read More - Fits:
- SUZUKI GSX-R1100 Initial oil cooling (G
- H
- J)
- SUZUKI
- YAMAHA FZR1000 (3GM)
- ...and more.
I installed it on my CB1300 SP.For some reason the CB1300SP doesn't have a Fork Guard. ('; Ω; `)I've installed KIJIMA's 1,000's in other cars, but KIJIMA's were fixed with Tie Band, so it was quit...Read More - Fits:
- SUZUKI GSX-R1100 Initial oil cooling (G
- H
- J)
- SUZUKI
- YAMAHA FZR1000 (3GM)
- ...and more.
It's not a very good build.If it is not done properly, the Outer tube may be scratched during installation.But! It's not available from any other manufacturer, so I had no choice but to…install it car...Read More - Fits:
- SUZUKI GSX-R1100 Initial oil cooling (G
- H
- J)
- SUZUKI
- YAMAHA FZR1000 (3GM)
- ...and more.
K-FACTORY 彩鈦前叉護蓋 適用於CB400 SF車型, 跟原廠的前叉護蓋有著相同的功能可以有效地防止行駛過程中的灰塵及碎石傷害到前叉內管表面產生刮痕進而造成前叉漏油!不過彩鈦的外觀讓愛車的質感加分許多!!
----------------------------------------------
K-FACTORY color titanium fork cover is s...Read More - Fits:
- SUZUKI GSX-R1100 Initial oil cooling (G
- H
- J)
- SUZUKI
- YAMAHA FZR1000 (3GM)
- ...and more.
I bought this because I think it's well known on Fork Guard because pretty much everyone wears it and I think it's a pretty high quality price.There is a paper enclosed that says no returns after open...Read More - Fits:
- SUZUKI GSX-R1100 Initial oil cooling (G
- H
- J)
- SUZUKI
- YAMAHA FZR1000 (3GM)
- ...and more.
Looks Titaniumium color is cool. However, it was difficult to install. I had to use a lot of force to install it, but I am satisfied.Read More - Fits:
- SUZUKI GSX-R1100 Initial oil cooling (G
- H
- J)
- SUZUKI
- YAMAHA FZR1000 (3GM)
- ...and more.
The appearance from the front becomes very parenthesis good and the conspicuousness goes up though it is a small part.Read More - Fits:
- SUZUKI GSX-R1100 Initial oil cooling (G
- H
- J)
- SUZUKI
- YAMAHA FZR1000 (3GM)
- ...and more.
i have received the package nice and not damaged. but when i ooened the box to check the contents, theres 4 screw and 4 nuts in one packing, 3 nuts supposed to be the one used for the item, nut/washer...Read More - Fits:
- SUZUKI GSX-R1100 Initial oil cooling (G
- H
- J)
- SUZUKI
- YAMAHA FZR1000 (3GM)
- ...and more.
Prodotto creato accuratamente oltre che piacevole alla vista ha una effettiva funzione di protezione dei para olii della forcella .
Product created carefully as well as pleasing to the eye, it has ...Read More - Fits:
- SUZUKI GSX-R1100 Initial oil cooling (G
- H
- J)
- SUZUKI
- YAMAHA FZR1000 (3GM)
- ...and more.
I vostri prodotti non possono che abbellire e impreziosire la moto. Siete precisi e celeri nella spedizione . Avete un elevato standar di competenza.
Your products can only embellish and embellish ...Read More - Fits:
- SUZUKI GSX-R1100 Initial oil cooling (G
- H
- J)
- SUZUKI
- YAMAHA FZR1000 (3GM)
- ...and more.
I am Material : I bought Titanium, but it was not good for baking. There are preferences, but there are quite individual differences, so people who stick to it is recommended to purchase at ShopRead More - Fits:
- SUZUKI GSX-R1100 Initial oil cooling (G
- H
- J)
- SUZUKI
- YAMAHA FZR1000 (3GM)
- ...and more.
Since OHLINS Front fork was installed, it was installed at the same time.The meaning as a decoration is stronger.I wish I could bake with Color a little more with Color.Read More - Fits:
- SUZUKI GSX-R1100 Initial oil cooling (G
- H
- J)
- SUZUKI
- YAMAHA FZR1000 (3GM)
- ...and more.
Although W800 tends to be seen in TouringMotorcycle, I want to transform it into SportyMotorcycle even a little,I took Fork Boots and installed this Guard.Material : Titanium and Material : Carbon and...Read More - Fits:
- SUZUKI GSX-R1100 Initial oil cooling (G
- H
- J)
- SUZUKI
- YAMAHA FZR1000 (3GM)
- ...and more.
I wanted to make W800 Sporty, I removed Fork Boots with Fashion priority from Fork seal guard and installed it.Read More - Fits:
- SUZUKI
Slider is relatively inconspicuous even if it is attached with a Small Size I think that it is a nice feeling. Mounting is an easy task just to insert Parts.Read More - Fits:
- DUCATI
- SUZUKI
- YAMAHA
We exchanged KATANA's Grip end ...When it was Universal, I thought whether the vibration of the Handlebar was easy to come out, and chose a dedicated one.Installation should be easy to reach ...Bo...Read More - Fits:
- SUZUKI GSX-R1100 Initial oil cooling (G
- H
- J)
- SUZUKI
- YAMAHA FZR1000 (3GM)
- ...and more.
I wanted to change Front fork to OHLINS. I will be even better.. I chose Titanium but I thought it might be a little burned in color.Also, when installing to Front fork, since the fixing of Plate is B...Read More - Fits:
- SUZUKI
- KAWASAKI
- HONDA
- BMW
Since K-FACTORY products are excellent in detail making, purchase. It also fully functions as Stand Hook.Damage is somewhat somewhat unusual in terms of location and usage.Read More - Fits:
- SUZUKI
OEMBolt got sore so I exchanged it for this Bolt when exchanging Oil.It should have been lightened though what Gram is, but I can not feel it.Since Circuit does not run, Wire lock is not necessary eit...Read More - Fits:
- SUZUKI GSX-R1100 Initial oil cooling (G
- H
- J)
- SUZUKI
- YAMAHA FZR1000 (3GM)
- ...and more.
I purchased an Titanium M size. It's secure. No problem about that. 2 torque wrenches were included in the set.Both the same T25 size. But, the size of the screws that connect the bracket should be T2...Read More
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING