- Fits:
- SUZUKI GSX-R1100 89
- SUZUKI GSR600 Vehicles with 43mm front fork diameter
- SUZUKI GSR400 Vehicles with 43mm front fork diameter
- SUZUKI Inazuma 1200 98-99
- YAMAHA XJR1200 94-97
- ...and more.
Fits CB1300 pretty well, machining quality is top notch
This relplaces the bulky headlight bracket and signal light holder. Read More - Fits:
- HONDA CBR500R
- YAMAHA MAJESTY250(SG03J) 00-02
- YAMAHA MAJESTY250(4HC) -99
- YAMAHA YZF750SP 95
- YAMAHA YZF-R1 98-01
- ...and more.
I installed it on my KATANA. I purchased the C Type because I modified the OilPressure part to install the Sensor.Read More - Fits:
- KAWASAKI ER-4N ABS ER400B [stock number]27010-0025
- KAWASAKI ER-4N ER400B [stock number]27010-0025
- KAWASAKI ELIMINATOR 400LX (Eliminator) ZL400A [stock number]27010-1170
- KAWASAKI ELIMINATOR 400 (Eliminator) ZL400A [stock number]27010-1170
- KAWASAKI ELIMINATOR 250V (Eliminator) VN250A [Genuine part number]27010-1170
- ...and more.
I bought it as Repair Parts stock. stop switch is suddenly ruined, so I stock it.Read More - Fits:
- YAMAHA YZF-R1 04-05
- YAMAHA XJR1300 98-10
- YAMAHA FJ1200 -91
- YAMAHA YZF-R1 09-13
- YAMAHA YZF-R1 09-13
- ...and more.
It is a little expensive, but since we use a temp meter made by YOSHIMURA, which is a Status, a little is unavoidable.I am using it on my CB1100, but instead of using an oil drain bolt, I am using a M...Read More - Fits:
- SUZUKI RF400 R
- SUZUKI GSX750E
- SUZUKI GSX400 E
- SUZUKI GSX250 E
- SUZUKI GSX400 F
- ...and more.
I didn't think of any other manufacturer because my previous car was also equipped with Mats Stripe.The OEM and durability of the W series are good, and I hesitated to replace it, but I thought that I...Read More - Fits:
- YAMAHA FZ700 87
- YAMAHA FJ600 1984 - 1985
- SUZUKI GSX-R750 86-87
- SUZUKI GSX-R1100 86-88
- SUZUKI GS850G 1979 - 1983
- ...and more.
This is an OEM form of Carbon brush. You need to replace it periodically because it wears out. It is not easy to get the brushSingle Body. Soldering is necessary, but I think this product is very help...Read More - Fits:
- SUZUKI GSX-R750 89-91
- SUZUKI GSX-R750 92-95
- SUZUKI volty Oil temperature gauge] [Installation position: oil pan drain bolt
- SUZUKI TL1000S Oil temperature gauge] [Installation position: oil pan drain bolt
- SUZUKI TL1000R 98-
- ...and more.
I bought this to use my dormant Temp meter as an Oil Temperature Meter for my BANDIT250v. It is also nice that the time is displayed because it is a motorcycle without a clock. It is a little expensiv...Read More - Fits:
- SUZUKI SKYWAVE250 burgman 98-05 CJ43A Water Temperature Gauge [Engine left thermo housing] (*3)
- YAMAHA YZF-R1 98-01 [water temperature gauge] [position:replace STD sensor]
- SUZUKI SKYWAVE650 burgman 02 [Water temperature gauge] [Position:radiator hose (adapter required)
- SUZUKI BANDIT1250 07-08 [Water temperature gauge] [Position:radiator hose (adapter required)] (*2)
- SUZUKI BANDIT250 -94 (with cowl) [water temperature gauge] [position:replace STD sensor]
- ...and more.
[How is it used?YOSHIMURA Required for Meter.You have to buy it.If you wrap the seal tape around the TaperScrew and install it, it won't leak so much.Easy electrical connectionWas the one you received...Read More - Fits:
- SUZUKI GSX-R750 89-91
- SUZUKI GSX-R750 92-95
- SUZUKI volty Oil temperature gauge] [Installation position: oil pan drain bolt
- SUZUKI TL1000S Oil temperature gauge] [Installation position: oil pan drain bolt
- SUZUKI TL1000R 98-
- ...and more.
This is a stable product for both Brand.No problem with installation and operation.Read More - Fits:
- SUZUKI RF400 R
- SUZUKI GSX750E
- SUZUKI GSX400 E
- SUZUKI GSX250 E
- SUZUKI GSX400 F
- ...and more.
The OEM light valve of SEROW250 ran out of bulbs, so I installed it.I ran out after just under 60,000km, so I'm happy to replace it when it gets over 50,000km.Compared to the OEM, it's about three tim...Read More - Fits:
- APRILIA
- BMW
- APRILIA
- APRILIA SPORTCITY125 i.e.
- APRILIA
- ...and more.
I've always been curious about the yellowish light color, so I bought the White ghost.We'll be judging the durability and visibility from now on, so for now it's a 3.Basically, they said it would lowe...Read More - Fits:
- HONDA CBR500R
- YAMAHA MAJESTY250(SG03J) 00-02
- YAMAHA MAJESTY250(4HC) -99
- YAMAHA YZF750SP 95
- YAMAHA YZF-R1 98-01
- ...and more.
I installed it on my NSR250.The OEM has a 2-pole coupler compared to Bullet Terminal, so it is installed with Rose Wiring.Confirm that the water temperature gauge is working after installation.We'll r...Read More - Fits:
- KAWASAKI ER-4N ABS ER400B [stock number]27010-0025
- KAWASAKI ER-4N ER400B [stock number]27010-0025
- KAWASAKI ELIMINATOR 400LX (Eliminator) ZL400A [stock number]27010-1170
- KAWASAKI ELIMINATOR 400 (Eliminator) ZL400A [stock number]27010-1170
- KAWASAKI ELIMINATOR 250V (Eliminator) VN250A [Genuine part number]27010-1170
- ...and more.
Has the stop-lamp light been unstable lately? I checked to see what it was, and I suspect it's the Switch or Wiring area of the front brake.It seems that there is no problem in the energization of the...Read More - Fits:
- HONDA CBR500R
- YAMAHA MAJESTY250(SG03J) 00-02
- YAMAHA MAJESTY250(4HC) -99
- YAMAHA YZF750SP 95
- YAMAHA YZF-R1 98-01
- ...and more.
It is easy to install. it is highly recommended that the WaterproofTape is pre-wrapped. Couplet-on so anyone can use it!Read More - Fits:
- HONDA CBR500R
- YAMAHA MAJESTY250(SG03J) 00-02
- YAMAHA MAJESTY250(4HC) -99
- YAMAHA YZF750SP 95
- YAMAHA YZF-R1 98-01
- ...and more.
I bought Progress and I bought this one as well for water temperature procurement.I think all the sensors are the same, but the coupler may be different depending on the object, so I have arranged the...Read More - Fits:
- SUZUKI GSX-R750 05-09
- SUZUKI GSX-R1000 09-11
- SUZUKI GSX1300R Hayabusa 08-15
- HONDA CBR1000RR 08-13
Originally, this is Harness for VPlus, but this time I'm going to install a Plasma booster I used it for the purposeWhen installing Plasma booster, machining the car Both SidesHarness I hated the need...Read More - Fits:
- HONDA CMX500 Rebel 16-21 PC56
- HONDA CBR650R 19-21 RH01
- HONDA CBR650F 17-18 RC96
- HONDA CBR650F 14-16 RC74
- HONDA CBR600RR 07-16 PC40
- ...and more.
Quantity:1pc. there is no Instruction Manual Product information is allTwo weeks after installation, the red light stopped coming on after less than 10km of actual mileageI made an inquiry The light c...Read More - Fits:
- HONDA CB150R
- YAMAHA YZF-R6 17-21 RJ27
- YAMAHA YZF-R6 08-16 RJ15
- YAMAHA YZF-R6 06-07 RJ11
- YAMAHA YZF-R6 05 RJ095
- ...and more.
Quantity:1pc. there is no Instruction Manual Product information is allBullet Type Terminal is installed from the beginning The Female and Front Blinker side Male terminals did not light up because th...Read More - Fits:
- SUZUKI RF400 R
- SUZUKI GSX750E
- SUZUKI GSX400 E
- SUZUKI GSX250 E
- SUZUKI GSX400 F
- ...and more.
Brightness, light distribution, ease of installation depending on the high precision of the product, etc.. It isThere are no messy parts and the durability lasts until you forget when you replaced itC...Read More - Fits:
- HONDA
- HONDA Forza (MF08) 04-
- HONDA Forza Z 04-
- HONDA
- HONDA
- ...and more.
I specified the make and model of car, but when I installed it, the claws didn't fit! In the end, I broke the claw in one place and shaved it off I looked at the compatibility list of the product I re...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING