- Fits:
- SUZUKI GSF1200S 96-99 [Used point]Front double disk
- SUZUKI GSF1200 95-99 [Used point]Front double disk
- SUZUKI GSX-R1100 89-92 [Used point]Front double disk
- SUZUKI RF900R 96-99 [Used point]Front double disk
- YAMAHA FZR750R 89 [Where used] Front double disk
- ...and more.
This old girl was in need of a new front and rear pad change and the customer decided they wanted to give the Brembo Sintered SA a go to see if they suited. Finding the right pad set for this bike was...Read More - Fits:
- SUZUKI SV400S 98-99 [Model]SV400W/SW [FNO]VK53A-100001 or later [Location]Rear
- KAWASAKI ZXR750 93-95 [Model]ZX750L1/L2/L3 [FNO]ZX750J-030001 or later [Location]Rear
- SUZUKI BANDIT250 89-92 [Model]GSF250/N/ZM [FNO]GJ74A-100033 or later [Location]Rear
- SUZUKI RGV250 GAMMA 89 [Model]RGV250K/AK [FNO]VJ21A-117639 or later [Location]Rear
- SUZUKI RGV250 GAMMA 88 [Model]RGV250J [FNO]VJ21A-100001 or later [Location]Rear
- ...and more.
Having heard a lot of good things about the SBS brand of brake pads, I decided it was time to give them a go on a different model. This bike is one of my own which does brake heavy and thought I would...Read More - Fits:
- SUZUKI GSX-R1000 07
- SUZUKI GSX-R1100 93-99 W
- SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA) 08-15
- SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA) 99-07
- SUZUKI SV650 (1999) 99-
- ...and more.
Product of good quality and arrives fast. Well pack and arrives in good order. Parts are genuine. Tracking facility are reliableRead More - Fits:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...and more.
A bit longer than intended for the front caliper. Maybe the pin I received is for the rear. But it fits properly on the front caliper anyway.Read More - Fits:
- YAMAHA XJR1300 98-99
- YAMAHA V-MAX 1200 90-00
- YAMAHA GRAND MAJESTY400 05-08 5RU [part used] Right side
- YAMAHA TRX850 95-00
- YAMAHA TX650 73 W-Disk
- ...and more.
Worked perfect on my 1980 CB750. The fitment was perfect. The adjustable lever is a brake addition to dial in the brake master cylinder to your liking. It is very responsive to your inputRead More - Fits:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...and more.
today i change the rear brake rotor and overhaul the caliper. the brake pin has seriously rusted and damaged so i cleaning all the surface of caliper and (not changed caliper piston...and Oring) and l...Read More - Fits:
- SUZUKI Bandit 400 89-99
- KAWASAKI GPZ750R 84-86
- KAWASAKI GPZ900R 84-01
- KAWASAKI GPZ600R 85
- KAWASAKI GPz750/F 83-85
- ...and more.
This is indeed a product of FOR JAPAN MODELManufacturer.Texture, paint, and function are all fine.Since it is an angled Master Cylinder, it would be ideal for a Handlebar with a drooping end.I have a ...Read More - Fits:
- SUZUKI GSX-R1000 07
- SUZUKI GSX-R1100 93-99 W
- SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA) 08-15
- SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA) 99-07
- SUZUKI SV650 (1999) 99-
- ...and more.
I bought this brake master cylinder to be installed on my 2006 Honda CB400SF Hyper VTEC Spec 3. I replaced the old original stock master cylinder with the Semi Radial Brake Master Cylinder kit was per...Read More - Fits:
- SUZUKI RG400 85-87 Gamma Type:R
- SUZUKI RG500γ (Gamma) 85-86 Type:R
- SUZUKI RF400 93-97 R Type:R
- SUZUKI RF900 96-99 R Type:R
- SUZUKI RG250 γ 83 Type:WF
- ...and more.
Cheap, just cheapWhat could go wrong? It is so cheap that I think it is a good idea.But whatQuantity:I have used Set and have never had a problem.No Trouble with delamination etc.The effectiveness is ...Read More - Fits:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...and more.
First, let me say that this is a special case based on a combination of several conditions.After cleaning the Caliper, I put it back together, tightened the pad pin, and was finishing up by tightening...Read More - Fits:
- SUZUKI GSX600F 00
- SUZUKI GSX600F 99
- SUZUKI GSX600F 03
- SUZUKI GSX750F 00
- SUZUKI GSX600F 98
- ...and more.
Item number:LR023Installed on Initial ModelGSX1300R HAYABUSARear brake was replaced due to symptoms of distortion.OEM was no problem, but the Disc Rotor was a reliable and reliable MADE IN SUNSTAR mad...Read More - Fits:
- SUZUKI Impulse 400 94-98
- SUZUKI WOLF250 88-90
- SUZUKI Impulse 400 05-07
- SUZUKI Inazuma 400 97-02
- SUZUKI Impulse 400 99-00
- ...and more.
I used the Red Pad last time, but since I replaced it with the WaveRotor, it started to wear out faster, so I bought it from Repeat. I bought it at Repeat because it was worn out too fast since I repl...Read More - Fits:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...and more.
For those who want to upgrade with OEM replacementIt's hard to lick, hard to decay, and also cool.Recommended for people who ride Honda motorcycles, but be careful with the length.Read More - Fits:
- SUZUKI BANDIT400V 95-97 (GK7AA)[Place of use]Rear[Required number]1
- SUZUKI BANDIT400V 95-97 (GK7AA)[Used place]Front[Required number]1
- SUZUKI BANDIT400V 89-94 (GK75A)[Used place]Rear[Required number]1
- SUZUKI BANDIT400V 89-94 (GK75A)[Used place]Front[Required number]1
- SUZUKI BANDIT400 95-97 (GK7AA)[Place of use]Rear[Required number]1
- ...and more.
I usually use OEM, but this is the first time I'm using OEM. OEM is getting strange wear & rust even after applying CopperGrease. I wish they didn't rust. I will replace the pad when I replace it, as ...Read More - Fits:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...and more.
I've been sticking with the Tokico 6 pods. This time I adopted CaliperOverhaul and baked paint instead of OEM. I think it's a good corrosion protection. I've heard that some people use seal tape to pr...Read More - Fits:
- SUZUKI GSX400R 86-87
- SUZUKI GSX400S Katana 92-99
- KAWASAKI ZX-12R 04-06
- SUZUKI RG250 gamma 84-86
- SUZUKI WOLF250 88-90
- ...and more.
Mounted on the rear of the ZrX1200DAEGIt was a replacement for the OEM, but it is easy to control and durable.it's recommendedRead More - Fits:
- SUZUKI GSX-R600 01-03
- SUZUKI GSX-R750 00-03
- SUZUKI Goose 350 92-00
- SUZUKI Goose 250 92-94
- SUZUKI Impulse 400 Type S 94-96
- ...and more.
It was registered as a 2017 model on myMotorcycle, and I made the mistake of jumping from there to buy one with a compatible model.Only older models are supported. Please check before purchase.It is n...Read More - Fits:
- YAMAHA XJR1300 98-99
- YAMAHA V-MAX 1200 90-00
- YAMAHA GRAND MAJESTY400 05-08 5RU [part used] Right side
- YAMAHA TRX850 95-00
- YAMAHA TX650 73 W-Disk
- ...and more.
The nissin master pump is the best and a cheaper option then getting expensive ones it is very smooth and high build in quality i would highly recommend Read More - Fits:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...and more.
Rust resistant Material:Stainless SteelPad pin。It is a little bit longer for one push for Caliper, but it can be used as it is with OEM and replacement.Features easy maintenance and performance retent...Read More - Fits:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...and more.
The OEM Bleeder Bolt is always going to Rust and Decay, so this Material:It is safer to replace it with Stainless Steel.Be sure to bleed the air and refill the fluid in the MASTER after replacement.Th...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING