- It took about 2 months to arrive after ordering. The spring diameter and damper shaft diameter are thicker, so the behavior of the car body is more flexible, and the car body has more depth and thickn...Read More
- Fits:
- HONDA CB1000 SF (Big One) 92-97 SC30
- HONDA CB1300 SF 98-02 SC40
- HONDA CB1300 SF 03-08 SC54
- HONDA CB1300SUPER BOLDOR 03-08 SC54
- HONDA CB400SF 99-08 V Revo NC39
- ...and more.
I bent the footpeg when I stood up and mangled it, so I replaced itIt is installation in CB400SB of 2012 MODELThe shape is slightly shorter on the Knee Slider, but the rest is the same look as the OEM...Read More - Fits:
- HONDA CB1000 SF (Big One) 92-97 SC30
- HONDA CB1300 SF 98-02 SC40
- HONDA CB1300 SF 03-08 SC54
- HONDA CB1300SUPER BOLDOR 03-08 SC54
- HONDA CB400SF 99-08 V Revo NC39
- ...and more.
It was listed as inspected, but the knee slider is wobbly!Either the Screw hole was thicker or the Bolt was thinner, and it was in the bag in spotted form!I applied screw lock agent and installed it, ...Read More - Fits:
- SUZUKI GS 750 S 83
- SUZUKI GS 750 N 77-79
- SUZUKI GS 750 L 79-81
- SUZUKI GS 750 EN 77-79
- SUZUKI GS 750 EC 77-79
- ...and more.
Strange indentation in the middle of the seat? I rode for about three years with an uncomfortable hollow likeI didn't want to waste the cost of putting it back in because I didn't like it, so I took t...Read More - Fits:
- SUZUKI Bandit 1250S 07-08
- SUZUKI Bandit 1250 07-08
- SUZUKI Bandit 1200S 06
- SUZUKI Bandit 1200 06
- SUZUKI GSX1400 01-08
- ...and more.
The footpegs are solidly built, look good and feel great to ride with. They allow for slightly more lean angle due to the lack of sliders underneath the pegs. However, one of the pegs comes loose over...Read More - Fits:
- HONDA CB1000 SF (Big One) 92-97 SC30
- HONDA CB1300 SF 98-02 SC40
- HONDA CB1300 SF 03-08 SC54
- HONDA CB1300SUPER BOLDOR 03-08 SC54
- HONDA CB400SF 99-08 V Revo NC39
- ...and more.
Previously, I turned on with CB 750I lost footpeg of CB 1300 this time - -The OEM is crisp and high. (Large pattern)This Manufacturer is also good in quality and good looking. It is cheap.Good product...Read More - Fits:
- SUZUKI BANDIT1250 01-05
- SUZUKI BANDIT1250S 01-05
Oil leaked from DamperROD of Rear suspension this time,Rear suspension is a replacement wearing slime.Prepare OEM's Rear suspension and purchase Hyper pro Rear spring,We ship to Active which is th...Read More - Fits:
- SUZUKI Bandit 1250S 07-08
- SUZUKI Bandit 1250 07-08
- SUZUKI Bandit 1200S 06
- SUZUKI Bandit 1200 06
- SUZUKI GSX1400 01-08
- ...and more.
Easily change from OEM's extreme footpeg to Race ish Image.Basically, just remove the OEM and just replace it.When removing the OEM, it is OK so as not to skip the spring.Since angle adjustment is...Read More - Fits:
- HONDA CB1000 SF (Big One) 92-97 SC30
- HONDA CB1300 SF 98-02 SC40
- HONDA CB1300 SF 03-08 SC54
- HONDA CB1300SUPER BOLDOR 03-08 SC54
- HONDA CB400SF 99-08 V Revo NC39
- ...and more.
I bent the Normal step and checked the OEM Parts Number, so it was quite a good priceIf you look for Wae Big, get to this item, Standard Type and Wide (Wide) TypeI bought two kinds.Quantity : Even if ...Read More - Fits:
- SUZUKI Bandit 1250S 07-08
- SUZUKI Bandit 1250 07-08
- SUZUKI Bandit 1200S 06
- SUZUKI Bandit 1200 06
- SUZUKI GSX1400 01-08
- ...and more.
I stole it and folded footpeg and bought it.. Even amateurs themselves could install them relatively easily. Split Pin is also attached.. It is good without rattling. The position of footpeg can also ...Read More - Fits:
- SUZUKI Bandit 1250S 07-08
- SUZUKI Bandit 1250 07-08
- SUZUKI Bandit 1200S 06
- SUZUKI Bandit 1200 06
- SUZUKI GSX1400 01-08
- ...and more.
NORMAL was thick and replaced by Shibui.It is exchanging other than Spring by removing NORMAL. Because there are holes in some places Position can be changed subtly? I made it to the position as it is...Read More - Fits:
- SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA) 08-21
- SUZUKI GSR750
- SUZUKI GSR600
- SUZUKI GSR400
- SUZUKI GLADIUS650650
- ...and more.
Normal step's Rubber does not match the newly purchased Boots (Height, angle)But Rear Sets is a bit - - -So, I tried this.I could solve the perfect trouble.Read More - Fits:
- SUZUKI GSXR 750 06-20
- SUZUKI HAYABUSA 07-21
- HONDA CBR600 F-F4
- HONDA CBR600 F
- HONDA CBR600 F4
- ...and more.
Since the portion of the Rubber of a Normal step was caught in the Shoes, exchange of was done.It is touch also with texture easy attachment dramatically and sufficient.The split pin is also recyclabl...Read More - Fits:
- SUZUKI GSXR 750 06-20
- SUZUKI HAYABUSA 07-21
- HONDA CBR600 F-F4
- HONDA CBR600 F
- HONDA CBR600 F4
- ...and more.
Since it was a Rubber and a Rubber to shift the position of a Boots when it was an old Step with a NORMAL Rubber and once had to separate from the Step one by one, it was unpleasant ...
since -- exch...Read More - Fits:
- HONDA CBR600 F-F4
- HONDA CBR600 F
- HONDA CBR600 F4
- HONDA CBR600 RR -06
- HONDA CBR900 RR
- ...and more.
Replacement working hours could also be exchanged for the Smooth and it is very much satisfied with about 30 minutes of working hours.
If there is also rear (Tandem) setting out ... It is good!
Read More - Fits:
- SUZUKI GSXR 750 06-20
- SUZUKI HAYABUSA 07-21
- HONDA CBR600 F-F4
- HONDA CBR600 F
- HONDA CBR600 F4
- ...and more.
[Webike Monitor] Although the Step itself is good, its processing accuracy of the foundation portion which lets a pin pass is bad.
Although it is satisfactory in the attachment situation, surface une...Read More - Fits:
- SUZUKI GSXR 750 06-20
- SUZUKI HAYABUSA 07-21
- HONDA CBR600 F-F4
- HONDA CBR600 F
- HONDA CBR600 F4
- ...and more.
Although color was abundant, red was purchased at the One point.
Structure is solid considering the price and it is satisfied with it.
It was able to do in about 10 minutes only by exchanging attach...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING