- Fits:
- KAWASAKI Z1000R 17-19
- KAWASAKI Z1000 03-16
- KAWASAKI VULCAN S CAFE 17-22
- KAWASAKI Ninja H2R 15-23
- KAWASAKI VERSYS 1000 12-18
- ...and more.
These grips were purchased for a customer who wanted a little more bling on their bike. The copper colour was the one they wanted. Searching Webike and found these fairly easily and at a better cost t...Read More - Fits:
- SUZUKI V-STROM650 07-09|12|14-21 [Model]dl650/k7/k8/k9/l2/l4/l5/l6/l7/l8/l9
- SUZUKI V-STROM250 17-21 [Model]DL250/L7/L8/L9
- SUZUKI V-STROM1000 14|-16|18-20 [Model]DL1000/L4/L5/L6/L8/L9
- SUZUKI SV650 19-21 [Model]L9
- SUZUKI KATANAGSX250R 18-21 [Model]L8/L9
- ...and more.
It makes install Kijima grip heater easier, i can install throttle grip without addhesive.
I used Kijima GH10 before, it was good, but little bit play on the throttle due to the optional gear parts, ...Read More - Fits:
- SUZUKI GSX250R 18-21 *A separate Kijima throttle pipe part number 201-5371 is useful for installation.
- SUZUKI V-STROM650 07-09|12|14-19 DL650/K7/K8/K9/L2/L4/L5/L6/L7/L8/L9 *If you have Kijima throttle pipe part number 201-5371 separately
- it will be useful for installation.
- SUZUKI GSX-S1000 17-18 L7/L8 *Special Kijima throttle pipe part number 201-5371 is useful for installation.
- SUZUKI GSX-R750 08-09|11-19 K8/K9/L1/L2/L3/L4/L5/L6/L7/L8/L9 *If Kijima throttle pipe part number 201-5371 is separately available for installation
- ...and more.
This is 3rd time i use Kijima grip heater.
I think this is the best grip heater, it is thin as original grips and included aluminum tape helps hold the grip quite strongly on the handlebar without ad...Read More - Fits:
- SUZUKI GSX1300R HAYABUSA [Hayabusa]. 99-07
- SUZUKI
- SUZUKI
- SUZUKI
- SUZUKI Bandid 1250 GSF1250 Bandit
- ...and more.
I easily replaced RC Engineering Clutch bearing System on my Suzuki Hayabusa 1300R which took about 15 minutes. It work smoothly. Although it has double sealed bearings but I feel it is not much diffe...Read More - Fits:
- Others Universal
- HONDA CB1100SF 00-01 [Model]X11
- HONDA CB125R 18 [Model]JC79-100
- HONDA CB1300 SUPER FOUR 05
- HONDA CB1300SB 14-19 [Model]SC54 AE
- ...and more.
I replaced the old grip on my Suzuki Hayabusa with Kijima grip rubber. The grip is soft and resilent I can easily control the throttle. Hight quality and good price compared to performance.Read More - Fits:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...and more.
Best bang for your buck, works ok, and i like it works/plugs in with clamp on heated grips!
I have good luck with most all webike products.
I purchased 1 of these along with the associated heated lock...Read More - Fits:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...and more.
There were many subsidiary materials, so there was no difficulty in installing them, and I personally think the LED light is beautiful
I'm willing to install it on my other bike.Read More - Fits:
- SUZUKI GSX-R1000 R 05-22
- SUZUKI GSX-S1000 15-20
- SUZUKI B-KING 07-09
- SUZUKI KATANA 19-20
- SUZUKI HAYABUSA 21
- ...and more.
My car is Suzuki. It's Hayabusa The finger is a bit far from the genuine brake lever, so there is a risk when breaking, but the multi-stage lever has found stabilityRead More - Fits:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...and more.
Second time use kijima heated grip. I used gh08 last time and this time gh10.
It is quite easy for install and internal switch makes handle bar clean.
Highly recommend this heated grip.Read More - Fits:
- KAWASAKI KH250 ALL MODEL
- HONDA Silver wing(ALL MODEL)
- HONDA Night Hawk(ALL MODEL)
- HONDA DIO(ALL MODEL)
- HONDA CREA(ALL MODEL)
- ...and more.
I bought these to replace softer "comfort" grips the previous owner installed. Immediately, I noticed an improvement in fine throttle control, and feel more certain of my hand positioning. The materia...Read More - Fits:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...and more.
My motorcycle is HONDA CB650R, and I have always wanted to modify a heating handle. I am afraid of buying bad products on other websites, so I bought this KIJIMA heating handle from webike. This heati...Read More - Fits:
- SUZUKI V-STROM 650 07-09 (Model DL650 K7
- K8
- K9
- L2
- L4
- ...and more.
KIJIMA VANS x CULT Collaboration Grip 7/8-inch
It goes well with the blue w800.
I'm very satisfied with the harmonious color.
The grip is moderate and not slippery.
It became a better w800 with a uniq...Read More - Fits:
- SUZUKI V-STROM 650 07-09 (Model DL650 K7
- K8
- K9
- L2
- L4
- ...and more.
这款我在webike购买的KIJIMA(田岛)VANS × CULT 7/8”握把套,安装在我的川崎Ninja ZX-6R上很合适,这是一款联名的握把套,结合VANS经典纹路,抓握很舒适。Read More - Fits:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...and more.
我的摩托是YAMAHA XMAX300,一直都想改装一款加热手把,在别的网站上害怕买到不好的产品,所以我在webike上购买了这款KIJIMA加热手把,这款加热手把支持各种型号的摩托安装,安装简便,需要注意的是需要专业人士接线。实际体验后加热效果很好。Read More - Fits:
- KAWASAKI KH250 ALL MODEL
- HONDA Silver wing(ALL MODEL)
- HONDA Night Hawk(ALL MODEL)
- HONDA DIO(ALL MODEL)
- HONDA CREA(ALL MODEL)
- ...and more.
Recieved these grips quickly, I am in the United States. Excellent quality and feel great in your hand. Will buy more in the future. Read More - Fits:
- HONDA CB400FOUR (water-cooled)
- HONDA CBR1100XX SUPERBLACKBIRD
- HONDA VTR250
- KAWASAKI NINJA650 R
- HONDA XR250 R
- ...and more.
The OEM grips on my HONDA SCOOPY110 are getting dirty and the insides are starting to wear out. So I installed this product. This product of Italian Domino brand looks mature and cool. When riding wit...Read More - Fits:
- Others Nisshin Radial Casting Type
- BMW HP4 13-14
- BMW S1000RR 10-17
- BMW S1000R 14-17
- SUZUKI GSX-R750 04-19
- ...and more.
Originally, the Titaniumium color of the same model was used for GSX-R1000RM2, but since the clutch lever was changed to Black Anodized Aluminum, the Brake lever side was also changed to Black Anodize...Read More - Fits:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...and more.
I live in Canada and heated grip are not a luxury. It allows me to use my motorcycle a few additional months. These grips are great quality, easy to install and offers allot of heat settings to make m...Read More - Fits:
- SUZUKI V-STROM 650 07-09 (Model DL650 K7
- K8
- K9
- L2
- L4
- ...and more.
I bought this grips because it is the same as SolePattern by vans, so I expected the gripping power to be better. The grip may feel thicker than other grips, but the grips themselves are very flexible...Read More - Fits:
- HONDA CB400FOUR (water-cooled)
- HONDA CBR1100XX SUPERBLACKBIRD
- HONDA VTR250
- KAWASAKI NINJA650 R
- HONDA XR250 R
- ...and more.
The SR OEMGrip makes my hands sore and the throttle slippery after long rides.I thought it might be vibration, but I also wondered if the Large size of my hand and the thickness of the Grip did not ma...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING