- Fits:
- KAWASAKI Varios 2 91-08
- KAWASAKI barios 91-08
- KAWASAKI Ninja 250R 08-09
- KAWASAKI Zephyr X 96-08
- KAWASAKI Zephyr 750RS 91-06
- ...and more.
I put it on my A7. The rubber of the original footpeg was hard and slippery, and the gold part was badly corroded and dirty, so I decided to replace it with Other Brand Product.It looks similar to the...Read More - Fits:
- KAWASAKI Varios 2 91-08
- KAWASAKI barios 91-08
- KAWASAKI Ninja 250R 08-09
- KAWASAKI Zephyr X 96-08
- KAWASAKI Zephyr 750RS 91-06
- ...and more.
I was able to install it without any problems. It was fully compatible with the GPZ900R-A7's Normal step. The spring that came with it was Exactly, but the pin was too long, so I used the Normal sprin...Read More - Fits:
- SUZUKI GSX-R1100 (GU74A)
- SUZUKI GSX-R1100 (GV73A)
- HONDA CBR250RR (MC22)
- HONDA CBR250R (1-light vehicle MC41)
- HONDA CBR125R (JC50)
- ...and more.
I felt that it became brighter, but it did not pass the inspection. I had to replace the light with a simple Orange light at a motorcycle shop to pass the inspection. It was expensive.Read More - Fits:
- SUZUKI GSX-R1100 (GU74A)
- SUZUKI GSX-R1100 (GV73A)
- HONDA CBR250RR (MC22)
- HONDA CBR250R (1-light vehicle MC41)
- HONDA CBR125R (JC50)
- ...and more.
It can be installed on B type 9R without any problem, but it is difficult to install without removing the Upper Cowl because the Spring that holds the Valve interferes with the Heat sink during instal...Read More - Fits:
- KAWASAKI Ninja 250SL 15
- KAWASAKI Ninja 250 13
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...and more.
Position will vary slightly.It's attached diagonally up and back.I thought it would be cooler if the bars were straight out wGood product for the price.I tried it out and I think the quality of the pr...Read More - Fits:
- KAWASAKI Ninja 250SL 15
- KAWASAKI Ninja 250 13
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...and more.
I bought it for the ninja1000SX 2020.The OEM with Rubber does not have to transmit vibration.I bought it because it is too heavy and the bottom of Boots and the Rubber catches too much on each other.T...Read More - Fits:
- SUZUKI GSX-R1100 (GU74A)
- SUZUKI GSX-R1100 (GV73A)
- HONDA CBR250RR (MC22)
- HONDA CBR250R (1-light vehicle MC41)
- HONDA CBR125R (JC50)
- ...and more.
It is written that it corresponds to H4 Valve, but it is inaccurate and it is not possible to install it without removing it to some extent with File, and it doesn't fit in the Headlight because it is...Read More - Fits:
- KAWASAKI Ninja 250SL 15
- KAWASAKI Ninja 250 13
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...and more.
As a person who wears racing boots even when touring, I'm not a fan ofPedal is far from subtle in both Z250SL OEM footpegs.I've been wanting to do this before, just for a minute.I found this one and s...Read More - Fits:
- SUZUKI GSX-R1100 (GU74A)
- SUZUKI GSX-R1100 (GV73A)
- HONDA CBR250RR (MC22)
- HONDA CBR250R (1-light vehicle MC41)
- HONDA CBR125R (JC50)
- ...and more.
I wanted a brighter headlight with the old VMAX, so I decided to use Multi-reflector and Large diameter head, but I wanted a brighter light with the current appearance and aimed for LED.I tentatively ...Read More - Fits:
- SUZUKI GSX-R1100 (GU74A)
- SUZUKI GSX-R1100 (GV73A)
- HONDA CBR250RR (MC22)
- HONDA CBR250R (1-light vehicle MC41)
- HONDA CBR125R (JC50)
- ...and more.
I've been interested in it for a while, so I bought it to try it out! 。 Since there is a Large heat sink compared to the Halogen bulb, you can avoid it and use it as a heat sink Quantity lock Bracket:...Read More - Fits:
- HONDA
- HONDA
- HONDA
- HONDA CB125 TF
- HONDA
- ...and more.
Is it a little brighter than Halogen? AboutAlso, the heat sink needs to be shaved off a little bit to be able to install it on the WRI didn't expect it to be good or bad, as I just bought it for a tes...Read More - Fits:
- HONDA
- HONDA
- HONDA
- HONDA CB125 TF
- HONDA
- ...and more.
There is also an LED Lamp with a device for heat dissipation behind Valve, but there are cases where it can not fit in the Headlight case eventually, but since the back of Valve does not protrude, Val...Read More - Fits:
- HONDA
- HONDA
- HONDA
- HONDA CB125 TF
- HONDA
- ...and more.
When Position was changed to LED, the color changed to Main valve and there was a slight discomfort,When I changed it to this product, it was perfect.Larger satisfied because the price was affordable ...Read More - Fits:
- KAWASAKI Ninja 250SL 15
- KAWASAKI Ninja 250 13
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...and more.
Excellent for COSPA. At this price you can not buy at other Manufacturer. The appearance changes at once. Instructions are not included, but installation is easy as it is the OEM street.Read More - Fits:
- YAMAHA TZR250 (3XV)
- YAMAHA FZR400
- YAMAHA YZF750
- YAMAHA YZF1000 THUNDER ACE
- YAMAHA TRX850
- ...and more.
Because it is Stand Hook, I thought that one would get scratched, I was searching for cheap items and made it to this one.Body has no problem such as color, feel and attachment. However, we needed som...Read More - Fits:
- KAWASAKI Varios 2 91-08
- KAWASAKI barios 91-08
- KAWASAKI Ninja 250R 08-09
- KAWASAKI Zephyr X 96-08
- KAWASAKI Zephyr 750RS 91-06
- ...and more.
since the Step of the Front was tattering with the old car body -- the object for exchange -- it purchased.
A new article is good too. Smile Since it grips firmly, it is large satisfaction.
Read More - Fits:
- KAWASAKI ZRX400 98-00 II
- KAWASAKI ZEPHYR400χ 97-00
- KAWASAKI BALIUS 95 [Fitting and other information]ZR250A-067781-ZR250A-067880
- KAWASAKI BALIUS 97-06
- KAWASAKI BALIUS II 97-06
- ...and more.
Since the lower upper of the meter cover had been damaged by the [Webike-monitor] fall, when the ASSY article was looked for for exchange, this product cheaper than an original manufacturer's product ...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING