71 Reviews View type:
Fits:- KAWASAKI ZRX1200S 01-08
- KAWASAKI ZRX1200R 01-08
- KAWASAKI ZRX1100 97-00
- KAWASAKI ZRX1200 DAEG 09-16
By NO NAME (7)This fit in place perfectly. Non of the included shims were needed to fit the caliper once installed. This also fit with the NA Metal Craft Brake Torque Rod PN: NMCZ-010. They also have a similar f...Read More- Fits:
- SUZUKI BANDIT400 89-03
- SUZUKI TL1000S 97-02
- SUZUKI TL1000R 98-03
- SUZUKI RGV250γ 90-95
- SUZUKI GSX-R750 96-99
- ...and more.
I am very happy with the new brakes for my Suzuki hayabusa 99-07, I am happy, I can brake well, before there were no brakes, thanks to the company active! I recommend!Read More - Fits:
- KAWASAKI ZRX1200S 01-08
- KAWASAKI ZRX1200R 01-08
- KAWASAKI ZRX1100 97-00
- KAWASAKI ZRX1200 DAEG 09-16
I used it to install the new Crab type Brembo.I have no particular complaints.Read More - Fits:
- KAWASAKI ZRX1200S 01-04
- KAWASAKI ZRX1200R 01-08
- KAWASAKI ZRX1200 DAEG 09-16
- KAWASAKI ZRX1100 97-00
It is not difficult to install, but it was troublesome.It is not impossible to remove the lower side without removing the exhaust pipe, but it is troublesome to turn it with Spanner.This time, I remov...Read More - Fits:
- YAMAHA FZR750R (OW-01)
- SUZUKI TL1000S 97-02
- SUZUKI TL1000R 98-03
- SUZUKI RF900R 94-99
- SUZUKI RGV250γ 90-95
- ...and more.
I bought these adapters for my front wheel and fork conversion on my Vfr700 rc24.
They fitted without any problems. I now have the best brakes I could have on the VfrRead More - Fits:
- KAWASAKI ZRX1200S 01-08
- KAWASAKI ZRX1200R 01-08
- KAWASAKI ZRX1100 97-00
- KAWASAKI ZRX1200 DAEG 09-16
I bought it for the diversion of the whole zrx1100Swing by the Spec. change, and the texture is good.Read More - Fits:
- KAWASAKI ZRX1100 97-00
- KAWASAKI ZRX1200R 01-08
I bought this product because the Horn under the Radiator was in the way when cleaning the Exhaust System and it did not look good. The effect is as expected and I'm very happy with Large, it might be...Read More - Fits:
- KAWASAKI ZRX1100 97-00
- KAWASAKI ZRX1200R 01-08
We replaced OEMTailCut with Trust Active products.I've Refreshing quite a bit from the 1100 yabbiness.However, at the time of installation, the OEM Small Case did not fit and I had to turn the Wiring ...Read More - Fits:
- SUZUKI BANDIT400 89-03
- SUZUKI TL1000S 97-02
- SUZUKI TL1000R 98-03
- SUZUKI RGV250γ 90-95
- SUZUKI GSX-R750 96-99
- ...and more.
[How is it used?Used for brembo 65mm.Black is luxury.Convincing textureWas the one you received as per Image?YesWas the installation difficult?NoHow was your experience with it?That's right.[Included ...Read More - Fits:
- YAMAHA FZR750R (OW-01)
- SUZUKI TL1000S 97-02
- SUZUKI TL1000R 98-03
- SUZUKI RF900R 94-99
- SUZUKI RGV250γ 90-95
- ...and more.
ACTIVE Caliper Support (brembo 40mm & Standard Rotor Diameter)CTIVE Caliper Support (brembo 40mm & Standard Rotor Diameter)
These are very well engineered brackets ,they also have a clean simple neat...Read More - Fits:
- KAWASAKI ZRX1200 R 01-08
- KAWASAKI ZRX1200 DAEG 09-16
Expensive, but the texture is very good, just like the ZETA I always use.KawasakiOEM is useful because there are only 4 adjustment steps.The installation accuracy is also high.Read More - Fits:
- SUZUKI BANDIT400 89-03
- SUZUKI TL1000S 97-02
- SUZUKI TL1000R 98-03
- SUZUKI RGV250γ 90-95
- SUZUKI GSX-R750 96-99
- ...and more.
The braket is very well made. They replaced the Tokico six piston calipers to Brembo 65mm four piston four pad calipers. No modifications needed,direct bolt on. These were put on a 1999 GSXR front for...Read More - Fits:
- KAWASAKI Z250 13-24 ABS
- KAWASAKI Z250 13-14 Domestic specifications
- KAWASAKI Ninja250R 08-12 Domestic specifications
- KAWASAKI Ninja250 13-24 ABS
- KAWASAKI Ninja250 13-24 Domestic spec.
- ...and more.
I think the quality is lower than OEM because it is not so expensive parts.I needed a thin switch to install the Radial brake master, so I installed it.It's not so much that I don't care about it, but...Read More - Fits:
- KAWASAKI Z250 13-24 ABS
- KAWASAKI Z250 13-14 Domestic specifications
- KAWASAKI Ninja250R 08-12 Domestic specifications
- KAWASAKI Ninja250 13-24 ABS
- KAWASAKI Ninja250 13-24 Domestic spec.
- ...and more.
The shape of the Engine Starter Motor is pushed in The Engine Starter Motor has been replaced by a spring that has been damaged by the internal spring because of the It's now constantly being pushed T...Read More - Fits:
- KAWASAKI Z250 13-24 ABS
- KAWASAKI Z250 13-14 Domestic specifications
- KAWASAKI Ninja250R 08-12 Domestic specifications
- KAWASAKI Ninja250 13-24 ABS
- KAWASAKI Ninja250 13-24 Domestic spec.
- ...and more.
Purchased with High Solo. I was wondering if there was some rework as the price was reasonable, but firmlyBolt-on. However, there is a lot of extra Wiring whether Universal is improved for each car mo...Read More - Fits:
- YAMAHA FZR750R (OW-01)
- SUZUKI TL1000S 97-02
- SUZUKI TL1000R 98-03
- SUZUKI RF900R 94-99
- SUZUKI RGV250γ 90-95
- ...and more.
I bought it for conversion of NORMAL 90 mm Pitch of TL 1000 R and brembo 40 mm Pitch.Caliper center is also in one shot, Washeretc. There is no need for fine adjustment of.It is natural, but the bigge...Read More - Fits:
- KAWASAKI ZRX1200R 01-08
- KAWASAKI ZRX1100 97-00
It is awesome to make Custom feeling.However, as for the main subject, about rigidity face, it is ???, but there is satisfaction by wearing.Although it is also in everyone's impression, I am conce...Read More - Fits:
- KAWASAKI ZRX1200R 01-08
- KAWASAKI ZRX1100 97-00
I was installing it when I was on the ZrX 1100.When this is installed, it first becomes apparently Spartan.Because it suppresses the Frame's tone, it becomes Sharp Handling at Cornering.I think it...Read More - Fits:
- KAWASAKI Z250 13-24 ABS
- KAWASAKI Z250 13-14 Domestic specifications
- KAWASAKI Ninja250R 08-12 Domestic specifications
- KAWASAKI Ninja250 13-24 ABS
- KAWASAKI Ninja250 13-24 Domestic spec.
- ...and more.
High Solo essentialsJust insert Wiring for installationI would like to have a Hazard switch for vehicles arriving at Hazard, so that Cover can do it ...Read More - Fits:
- KAWASAKI Z250 13-24 ABS
- KAWASAKI Z250 13-14 Domestic specifications
- KAWASAKI Ninja250R 08-12 Domestic specifications
- KAWASAKI Ninja250 13-24 ABS
- KAWASAKI Ninja250 13-24 Domestic spec.
- ...and more.
It is purchased to attach High Solo.I was also solidly making. Hazard switchI got for a moment because it was attached, I got it.(ZEPHYR 400 χ has Hazard switch attached to Switch of HandlebarLeft) Be...Read More
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING