- Fits:
- KAWASAKI Z800 72-80
- KAWASAKI Z900 (KZ900) 72-80
- KAWASAKI Z1000 (air-cooled) 72-80
- KAWASAKI Z750 (air-cooled) 72-80
- KAWASAKI 750SS Mach IV (H2) 71-
There is no snagging, etc., and it works normally.I think that the quality of the bearing depends on the degree of low wear. I think it can be used without any problem as long as it rotates well and d...Read More - Fits:
- KAWASAKI Z900 (KZ900) Old Z series Z1R/Z 1000R/900/750GP ALL
- KAWASAKI Z1000R Old Z series Z1R/Z 1000R/900/750GP ALL
- KAWASAKI Z1-R/Z1-RII Old Z series Z1R/Z 1000R/900/750GP ALL
It's a quintessential quality.It was a replacement from the tired Normal suspension, so I felt even more effective!Unfortunately, it is difficult to set up.It is a suspension that can be zapped out an...Read More - Fits:
- KAWASAKI Z1000MKII 79-80
- KAWASAKI Z1R-II 79-80
- KAWASAKI Z1R 78
- KAWASAKI KZ1000 77-78 (Round tank)
- KAWASAKI KZ900 76
I just don't know when.Cancellation.Read More - Fits:
- KAWASAKI Z1 (900SUPER4)
- KAWASAKI Z1000
- KAWASAKI Z1000 MkII
- KAWASAKI Z2 (750RS/Z750FOUR)
- KAWASAKI Z750FX
- ...and more.
I bought this product because OEM Parts was discontinued.This is a small part, but without it, you cannot fix the Light Bracket.I am grateful that Ripro has released these Parts.Read More - Fits:
- KAWASAKI Z1 (900SUPER4) 72-80
- KAWASAKI Z2 (750RS/Z750FOUR) 72-80
- KAWASAKI Z750 (air-cooled) 72-80
- KAWASAKI Z900 (KZ900) 72-80
- KAWASAKI Z1000 (air-cooled) 72-80
- ...and more.
I changed it for the sake of appearance The attached Master Cylinder cannot be installed unless it is processed It is possible to process a little bracket with FileRead More - Fits:
- KAWASAKI Z900 (KZ900)
- KAWASAKI Z750FX
- KAWASAKI Z2 (750RS/Z750FOUR)
- KAWASAKI Z1100R
- KAWASAKI Z1100GP
- ...and more.
By replacing the old chain slider with one made by PMC, the smallness of the chain slider was reduced to the MK2 The parts are new and the footing is tighter and I am satisfied with the productRead More - Fits:
- KAWASAKI Z750FX
- KAWASAKI Z1000 MkII
- KAWASAKI Z900 (KZ900) 76-80
- KAWASAKI Z750 (air-cooled) 76-80
- KAWASAKI
- ...and more.
I installed it in my Kawasaki Z seriesIt was discount time, so I was able to purchase it at a fairly low priceThere are two color choices, and the design is good for Parenthesis and Cost Performance i...Read More - Fits:
- KAWASAKI Z750FX
- KAWASAKI Z1000 MkII
- KAWASAKI Z900 (KZ900) 76-80
- KAWASAKI Z750 (air-cooled) 76-80
- KAWASAKI Z1000 (air-cooled) 76-80
- ...and more.
I installed it in my Kawasaki Z seriesIt was discount time, so I was able to purchase it at a fairly low priceThere are two color choices, and the design is good for Parenthesis and Cost Performance i...Read More - Fits:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...and more.
Rubber parts are Manufacturer which is said to be various in particular, but after 5 years of exchange it has not occurred Oil leaked, it can be used. I only finished with Oil fee for a while but I th...Read More - Fits:
- KAWASAKI Z750 (air-cooled) 78-80
- KAWASAKI Z900 (KZ900) 78-80
- KAWASAKI Z1-R/Z1-RII 78-80
- KAWASAKI
It installed in Z1R.Since it is impossible to adjust with OEM, install it at the same time as YSS's PVDValveThere is no interference with Handlebar, it can be installed as it is.Despite the desire...Read More - Fits:
- KAWASAKI Z1000 (air-cooled) A1
- KAWASAKI Z1 (900SUPER4)
- KAWASAKI Z1000 MkII (Excluding '80 models)
- KAWASAKI Z900 (KZ900)
- KAWASAKI Z1000 (air-cooled) A2
Mounting of Rubber part of footpeg and Gold part of BodyWas upside down.(The slippery portion of the back of Rubber comes to the part where you hit the shoe sole)Since Split Pin was a Type that can no...Read More - Fits:
- KAWASAKI Z1000 (air-cooled) 18-inches/Rim Width:This is a steel swing arm for 4.50 inch wheels
- wide tires (160/60-18)
- KAWASAKI Z900 (KZ900) 18-inches/Rim Width:This is a steel swing arm for 4.50 inch wheels
- wide tires (160/60-18)
- KAWASAKI Z750 (air-cooled) 18-inches/Rim Width:This is a steel swing arm for 4.50 inch wheels
- ...and more.
Chain and Tire delicately cleaned up my friend's motorcycle so I bought this one because there is little clearance.Although it is 2 mm, it is completely different from a feeling.I hope the price i...Read More - Fits:
- KAWASAKI
- KAWASAKI
- KAWASAKI 750SS Mach IV (H2) (Drum brake)
- KAWASAKI
- KAWASAKI Z2 (750RS/Z750FOUR) 72-76
- ...and more.
I have purchased spoke kits for the Z1-900 model, from two other sellers. One on Ebay and another online via their website. Both where nothing like the originals. In fact, they weren\'t even close. Wh...Read More - Fits:
- KAWASAKI Z1 (900SUPER4)
- KAWASAKI Z2 (750RS)
- KAWASAKI Z900 (KZ900)
I bought this rearset as the PMC one was sold out. The linkages all seem to be well made & connect nicely. The pegs fold up which was a nice surprise. The casting isn\'t fantastic but what do you expe...Read More - Fits:
- KAWASAKI Z750FX
- KAWASAKI Z1000 MkII
- KAWASAKI Z900 (KZ900) 76-80
- KAWASAKI Z750 (air-cooled) 76-80
- KAWASAKI Z1000 (air-cooled) 76-80
- ...and more.
These wheels is realy a pice of art!!!
Thanks to webike superfast shippment!!Read More - Fits:
- KAWASAKI Z1 (900SUPER4)
- KAWASAKI Z2 (750RS)
- KAWASAKI Z900 (KZ900)
or [ that it is the same as the O present naked about a position and a run ] -- a little -- attack mind -- clever touch. O It is not too high, and the back does not pass but it is right just. O He doe...Read More - Fits:
- KAWASAKI Z1-R/Z1-RII Old Z series Z1R/Z 1000R/900/750GP ALL
- KAWASAKI Z1000R Old Z series Z1R/Z 1000R/900/750GP ALL
- KAWASAKI Z900 (KZ900) Old Z series Z1R/Z 1000R/900/750GP ALL
It is used for the kawasaki Z1. the 17-inch specification of my vehicles is modernistic -- not coming out custom -- rather -- that time -- a wind -- since clever touch is aimed at, this style without ...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING