![PMC(Performance Motorcycle Creative) ABS Side Cover [PMC Winter Sale]](http://img-webike-370429.c.cdn77.org/catalogue/10073/69-202_TS.jpg)
![JB POWER (BITO R&D) [MAGTAN] Magnesium Forged Wheel JB1](http://img-webike-370429.c.cdn77.org/catalogue/11318/JB1_TS.jpg)
KIJIMA Oil Filter
Used for Z1000MK2This is my first time using it, so I don't know how well it works.I'm counting on the power of the magnet.
 |  |  |
The MY79 Z1000 was named Mk-II. They had enlarged the bore of Z1 engine by 4mm to make it 1015cc. It had been completely remodeled into a sharp style, the straight line design of the second generation, and had adopted the full-transistor ignition system.
| Displacement | 1015 | Engine Type | Air-cooled/4-stroke/DOHC/4 Valve/4-cylinder |
| Maximum Output (ps) | 93ps(68.0 kw)/8000rpm | Maximum Torque (kgf/m) | 9.1kg・m(89.2N・m)/6500rpm |
| Vehicle Weight (Dry Weight) | 245 | Fuel Tank Capacity liter | 17.8 |
RK High Carbon Steel Premium Sprocket
Sprocket was also replaced along with 520Conversion.The design is good and the steel is hard to reduce.
SUNSTAR Chain&Sprocket Quantity:1 Set of 3-items
First of all, it is good to be able to purchase it without getting lost in this and that. Especially this time, I was saved because it was a product called for Conversion from 630. I think I would have made a mistake if I had thought of it myself. The chain is cut to the correct length so it is easy...
DOREMI COLLECTION Point Cover Gasket
I bought it because I like the color close to iron, but there is a difficulty in Size.There is a part that sticks out by 2-3mm.The front of the photo is made by PMC and the back is made by DOREMI.I don't like the color of the PMC but the Size is perfect.
NGK Iridium Plug BR8EIX 3669
I put Iridium plugs in my RZ-R. The acceleration was improved a little. However, I think that Windshield IRIDIUM plugs are not suitable for 2-stroke engine.
NGK Iridium Plug BR8EIX 3669
I put Iridium plugs in my RZ-R.Slightly, but it seems to be better than a normal Plug.However, Windshield IRIDIUM is a little easier to CUB.I don't like that little CUB re, so now I use Slit processing on regular Plug.
![PMC(Performance Motorcycle Creative) Z/KZ Side Stand [PMC Winter Sale]](http://img-webike-370429.c.cdn77.org/catalogue/15947/81-5230_TS.jpg)
PMC(Performance Motorcycle Creative) Z/KZ Side Sta...
The material is made of cast iron, but I didn't want it to fall again, so I took it off immediately.
NAGAI DENSHI Silicone Power Plug Code
Replaced 31 years of OEMPlug cord in ZEPHYR750.Recently, only the second cylinder became non-combustible and I changed to Ultra code.The Ultra cord was a little longer than the OEM #2 cord, but I installed it at the same length without cutting it. I was able to get a good fit without too much saggin...
NGK Power Cable (Plug Code)
Power cable NGK. I bought Minsk for a motorcycle. The spark is great. Before that there was another company, there was a very bad spark. But after installing the NGK power cable, the bike started to start better. The cable is long and thick. The quality is excellent. I advise!
![PMC(Performance Motorcycle Creative) Z/KZ Tachometer Port Release Lock Type [PMC Winter Sale]](http://img-webike-370429.c.cdn77.org/catalogue/10073/81-2235_TS.jpg)
PMC(Performance Motorcycle Creative) Z/KZ Tachomet...
Oil leak & Ntilde. from Tachometer extraction part;It took me a long time to remove it, but I was able to remove it safely in the end. It took me a while to remove it, but I was able to remove it without any problem. The OEM Tachometer has a single O-ring on the outside diameter and the MeterWire pa...
(4.0)
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING