![PMC(Performance Motorcycle Creative) Casting Piston Kit [PMC Winter Sale]](http://img-webike-370429.c.cdn77.org/catalogue/10073/72-471_TS.jpg)
DAYTONA Red Pad Brake Pads
Used for z1.Rotor is externalJust the right amount of braking power.Aggressiveness to Rotor seems likely.It worked well on a rainy day.
 |  |  |
 | ||
It had emerged as the successor of Z1A which had changed its color in 1973, and its carburetor in 1974. The tail line has been raised to emphasize its emblem "900".
| Displacement | 903 | Engine Type | Air-cooled/4-stroke/DOHC/2 Valve/Parallel 4-cylinder |
| Maximum Output (ps) | 82ps(60.0 kw)/8500rpm | Maximum Torque (kgf/m) | 7.5kg・m(73.5N・m)/7000rpm |
| Vehicle Weight (Dry Weight) | 230 | Fuel Tank Capacity liter | - |
K-FACTORY Oil Filler Cap B Type
I've had my eye on this for a while and finally bought it.I think the Design and color are the coolest compared to other companies' products.It's a small product, but when you install it, it catches your eye.It's a little expensive, but I'm satisfied.
DOREMI COLLECTION Blow-by Filter
Hose, Oil catch tank, Valve and many other parts are available, but if you think about the trouble such as resistance, clogging, bending and crushing of Hose, this is the best.
NITRO RACING Reduction Kit (Engine Slider)
If you have a custom car that doesn't look like it was made in the 70's, it's probably not a good idea. I think it's still one of the less assertive products in the same category. I've lost a lot of weight recently and don't have confidence in my physical strength, so I put it on for now.
ALCAN hands iGrip for Grip Φ22
Fit with my bike Honda Rs150r, easy to install. Very comfortable with the this rubber. Fast delivery, wrap well and good quality with the price.
YOSHIMURA MIKUNI TMR36 Carburetor
I installed it on my Z1.It's a replacement for the CR33, but it's as if Motorcycle became something else. "Sharp. It will beIt can be driven normally with a pontoon, but the Throttle is much lighter, and at first it will thump as if it were High Solo.I think you will be surprised if you open it with...
![PMC(Performance Motorcycle Creative) Speedometer Gear for 17/18-inch Z Series [PMC Winter Sale]](http://img-webike-370429.c.cdn77.org/catalogue/18936/43-931-934_TS.jpg)
PMC(Performance Motorcycle Creative) Speedometer G...
I think that the cable connection should have a little more offset.More or less, it has been Offset.What we are looking for is a long term MaintenanceFreeThere is no quick answer.It's well made and I have no worries.It's a necessary part when replacing 19-inches to 18-inches, soI'm glad you offered ...
![PMC(Performance Motorcycle Creative) Z1/Z2 Brake Pad Shim [PMC Winter Sale]](http://img-webike-370429.c.cdn77.org/catalogue/15947/81-3311_TS.jpg)
PMC(Performance Motorcycle Creative) Z1/Z2 Brake P...
Because I used OEM Brake Pads until now, I did not have the problem of Brake's weeping, but because OEM Pads are out of date, I replaced them with external Pads this time. Shim of OEM is small in diameter and moves behind the Pad, so I bought this Other Brand Product. The size is also suitable for t...
DAYTONA Replace Oil Filter Built-in Type (KAWASAKI...
A very ordinary Oil Filter.Given that there are cheaper products out there, I'd say the cost is normal.
M-TEC Chukyo Handlebar Switch
The paint job was damaged by brake fluid from years of use, so I decided to replace it with MRS Replace and Refresh. I'm very happy with the price.I used a Nipper to pluck out the positioning botch against the Handlebar for installation. This is necessary if you are using an external Handlebar.
(4.0)
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING