- Fits:
- KAWASAKI Z1000R 17-19
- KAWASAKI Z1000 03-16
- KAWASAKI VULCAN S CAFE 17-22
- KAWASAKI Ninja H2R 15-23
- KAWASAKI VERSYS 1000 12-18
- ...and more.
These grips were purchased for a customer who wanted a little more bling on their bike. The copper colour was the one they wanted. Searching Webike and found these fairly easily and at a better cost t...Read More - Fits:
- KAWASAKI ER-6F 07-10
- KAWASAKI ER-4N 11-13
- KAWASAKI Z250 13-14
- KAWASAKI ZZR1400 (ZX-14) 06-11
- KAWASAKI ZZR1100/ZX-11 99-01
- ...and more.
The photo shows the connecting kit for a universal handlebar type, although the motorcycle fitment list showed only certain variants of Kawasakis. This led me to believe the listed Kawasaki models use...Read More - Fits:
- SUZUKI GSX250R 18-21 *A separate Kijima throttle pipe part number 201-5371 is useful for installation.
- SUZUKI V-STROM650 07-09|12|14-19 DL650/K7/K8/K9/L2/L4/L5/L6/L7/L8/L9 *If you have Kijima throttle pipe part number 201-5371 separately
- it will be useful for installation.
- SUZUKI GSX-S1000 17-18 L7/L8 *Special Kijima throttle pipe part number 201-5371 is useful for installation.
- SUZUKI GSX-R750 08-09|11-19 K8/K9/L1/L2/L3/L4/L5/L6/L7/L8/L9 *If Kijima throttle pipe part number 201-5371 is separately available for installation
- ...and more.
This is 3rd time i use Kijima grip heater.
I think this is the best grip heater, it is thin as original grips and included aluminum tape helps hold the grip quite strongly on the handlebar without ad...Read More - Fits:
- Others Universal
- HONDA CB1100SF 00-01 [Model]X11
- HONDA CB125R 18 [Model]JC79-100
- HONDA CB1300 SUPER FOUR 05
- HONDA CB1300SB 14-19 [Model]SC54 AE
- ...and more.
I replaced the old grip on my Suzuki Hayabusa with Kijima grip rubber. The grip is soft and resilent I can easily control the throttle. Hight quality and good price compared to performance.Read More - Fits:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...and more.
Best bang for your buck, works ok, and i like it works/plugs in with clamp on heated grips!
I have good luck with most all webike products.
I purchased 1 of these along with the associated heated lock...Read More - Fits:
- KAWASAKI NINJA250R 18-21 EX250P
- KAWASAKI NINJA400 (2014-) 18-21 EX400G
This is the only 'superbike kit' I could find for Ninja 400. Luckily, from Webike it's reasonably priced, given the low initial cost of the Ninja 400. The bike is said to have a relaxed riding positio...Read More - Fits:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...and more.
There were many subsidiary materials, so there was no difficulty in installing them, and I personally think the LED light is beautiful
I'm willing to install it on my other bike.Read More - Fits:
- KAWASAKI Ninja400 18-22|23
- KAWASAKI Ninja250 18-22|23
- KAWASAKI Ninja ZX-25R 20-22
- KAWASAKI M8 General-purpose
- KAWASAKI Z900RS 18-22|23
- ...and more.
The Yoshimura bar ends look so much nicer than the genuine Kawasaki part.
The service from Webike to Australia is incredible.
Shipping costs using EMS makes it so much cheaper as well.Read More - Fits:
- KAWASAKI Z650RS 24
- KAWASAKI ELIMINATOR 24
- KAWASAKI Ninja ZX-4R SE 23
- KAWASAKI Ninja ZX-4R RR 23
- KAWASAKI Ninja ZX-25R 21-24
- ...and more.
About quality and texture - not the best quality for price.
About the feeling of use - feels ok
Cost performance and comparison with other products - Too pricey.Read More - Fits:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...and more.
Second time use kijima heated grip. I used gh08 last time and this time gh10.
It is quite easy for install and internal switch makes handle bar clean.
Highly recommend this heated grip.Read More - Fits:
- HONDA CB1300ST 14-
- YAMAHA YZF-R125 08-13
- HONDA CBR500R
- BMW F800ST 06-13 There is a step in the mounting area
- use stock bolts.
- ...and more.
Mirrir is of great quality and will not.vibrate when rising. Clear mirror images. Large enough to see everything before changing lanes. Read More - Fits:
- YAMAHA FJR1300 01-05
- YAMAHA FZ-6S 07
- YAMAHA YZF-R1 09-14
- YAMAHA YZF-R125 08-13
- YAMAHA YZF-R15 11-
- ...and more.
This item has a lot of parts to fit different motorcycle. Installation is very easy and the instructions are easy to read. But if you buy, you need patient to install and setup. Read More - Fits:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...and more.
My motorcycle is HONDA CB650R, and I have always wanted to modify a heating handle. I am afraid of buying bad products on other websites, so I bought this KIJIMA heating handle from webike. This heati...Read More - Fits:
- HONDA CBR500R
- YAMAHA YZF-R3
- YAMAHA YZF-R3 19-
- YAMAHA YZF-R3 15-19
- YAMAHA YZF-R25 19-
- ...and more.
我的摩托车改装了前置后视镜,原车的后视镜就不能使用了。所以我在webike上购买了这款TANAX AEX7,这款后视镜安装方便,它配备了安装工具和螺丝。总体效果非常的好,视野开阔,还具备夜间防炫光的能力。webike上面购买价格比别的地方划算,连运费都有折扣。Read More - Fits:
- SUZUKI V-STROM 650 07-09 (Model DL650 K7
- K8
- K9
- L2
- L4
- ...and more.
KIJIMA VANS x CULT Collaboration Grip 7/8-inch
It goes well with the blue w800.
I'm very satisfied with the harmonious color.
The grip is moderate and not slippery.
It became a better w800 with a uniq...Read More - Fits:
- KAWASAKI ZX-6R 12-15
- KAWASAKI Ninja1000SX 11-13
- KAWASAKI Ninja1000 13-
- KAWASAKI Ninja1000 11-13
- KAWASAKI ER-6f 13-16
- ...and more.
我的摩托车时YAMAHA XMAX300,这台车我改装了前置后视镜支架,需要搭配这款webike购买的TANAX AEX8后视镜,这款后视镜视野非常好,它采用增强的防眩光性能,能有效抑制车灯对视线的影响,安装很稳固一点也不抖动。Read More - Fits:
- SUZUKI V-STROM 650 07-09 (Model DL650 K7
- K8
- K9
- L2
- L4
- ...and more.
这款我在webike购买的KIJIMA(田岛)VANS × CULT 7/8”握把套,安装在我的川崎Ninja ZX-6R上很合适,这是一款联名的握把套,结合VANS经典纹路,抓握很舒适。Read More - Fits:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...and more.
我的摩托是YAMAHA XMAX300,一直都想改装一款加热手把,在别的网站上害怕买到不好的产品,所以我在webike上购买了这款KIJIMA加热手把,这款加热手把支持各种型号的摩托安装,安装简便,需要注意的是需要专业人士接线。实际体验后加热效果很好。Read More - Fits:
- YAMAHA GEAR (GEAR) 4KN [Genuine part number]93501-04011 19 [Model name]BA50S/BA50ST [Type]4KN2/4KN3
- YAMAHA GEAR (GEAR) 4KN [Genuine part number]93501-04011 19 [Model name]BA50 [Type]4KN1
- YAMAHA FZR250R 3LN [Genuine Part Number]93501-04011 38(Top and Bottom combined) [Model Name]FZR250R [Type]3LN6/3LN7
- YAMAHA FZR250R 3LN [Genuine Part Number]93501-04011 38(Top and Bottom combined) [Model Name]FZR250R [Type]3LN3/3LN5
- YAMAHA FZR250R 3LN [Genuine Part Number]93501-04011 38(Top and Bottom combined) [Model Name]FZR250R [Type]3LN1
- ...and more.
these steel ball bearing look same as OEM. Buy with confident because IT'S MADE IN JAPAN.. My TW200 had 70k Kilometers done. I replaced my bike ball bearing at 40000km,after that never touched the bea...Read More - Fits:
- YAMAHA GEAR (GEAR) 4KN [Genuine part number]93501-04011 19 [Model name]BA50S/BA50ST [Type]4KN2/4KN3
- YAMAHA GEAR (GEAR) 4KN [Genuine part number]93501-04011 19 [Model name]BA50 [Type]4KN1
- YAMAHA FZR250R 3LN [Genuine Part Number]93501-04011 38(Top and Bottom combined) [Model Name]FZR250R [Type]3LN6/3LN7
- YAMAHA FZR250R 3LN [Genuine Part Number]93501-04011 38(Top and Bottom combined) [Model Name]FZR250R [Type]3LN3/3LN5
- YAMAHA FZR250R 3LN [Genuine Part Number]93501-04011 38(Top and Bottom combined) [Model Name]FZR250R [Type]3LN1
- ...and more.
As I was already replacing the old worn parts for the foot rests, I decided to go for these non genuine ones as they are just ball bearings and I needed a few.
Very well made, exact to specifications...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING