![PMC(Performance Motorcycle Creative) Φ330 S1 TYPE Disc Brake Kit TYPE-C [PMC Winter Sale]](http://img-webike-370429.c.cdn77.org/catalogue/z-pmc/type2C_TS.jpg)
![PMC(Performance Motorcycle Creative) Z/KZ Side Stand [PMC Winter Sale]](http://img-webike-370429.c.cdn77.org/catalogue/15947/81-5230_TS.jpg)
PMC(Performance Motorcycle Creative) Z/KZ Side Sta...
The material is made of cast iron, but I didn't want it to fall again, so I took it off immediately.
 |  |  |
 |  |  |
 | ||
The thrid Lawson Replica which has a CV carburetor along with the GPz1100 engine. The vehicle body is the same as Z1000R2 but adopts 18-inch for its front.
| Displacement | 1089 | Engine Type | Air-cooled/4-stroke/DOHC/2 Valve/Parallel 4-cylinder |
| Maximum Output (ps) | 114ps(84.0 kw)/8500rpm | Maximum Torque (kgf/m) | 10.2kg・m(100N・m)/7000rpm |
| Vehicle Weight (Dry Weight) | 237 | Fuel Tank Capacity liter | - |
NAGAI DENSHI Silicone Power Plug Code
Replaced 31 years of OEMPlug cord in ZEPHYR750.Recently, only the second cylinder became non-combustible and I changed to Ultra code.The Ultra cord was a little longer than the OEM #2 cord, but I installed it at the same length without cutting it. I was able to get a good fit without too much saggin...
H.Craft High Power Ignition Coil 3Ω Dual Lead
Replacement from DYNACoil.It works fine, but the High-Tension Cord (Plug Cord) Press-in work is required forIt might be hard if you can't do Crimp or press fit, but some people break Bracket or Body, so you might as well just ask a Motorcycle shop to put the code in.There is no handling instruction ...
ALCAN hands iGrip for Grip Φ22
Fit with my bike Honda Rs150r, easy to install. Very comfortable with the this rubber. Fast delivery, wrap well and good quality with the price.
SUNSTAR Rear Sprocket Duralumin
I replaced the OEMSprocket with +1 gun MADE IN SUNSTAR.It's so smooth that you can tell as soon as you start driving.You can feel the high precision as expected.It also has a large effect on dress-up of the feet.
ALCAN hands Extreme Grip PCG-011
End cap may be a little Slant in structure.The dimensions of the Throttle side are too Exactly, so a lot of force is needed to insert it.Considering the strength of each part, I think you need to insert it slowly with PRESS.Also, if you insert it to the root, it will interfere with the Handlebar in ...
SUNSTAR Rear Sprocket Duralumin
我的车是KAWASAKI的ZX-6r，为了增大低扭，就换了个47齿的牙盘（原厂是43齿的），哈哈。SUNSTAR牙盘之前用过，做工非常好，再加上还喜欢这个金色，配上DID的金色链条，非常的好看。牙盘加大后，起步更加有劲了。
----------------------------------------------
My car is a KAWASAKI ZX-6r, in order to increase low torque, on the change of a crankset 47 teeth (43 teeth in the original), ha. SUNST...
----------------------------------------------
My car is a KAWASAKI ZX-6r, in order to increase low torque, on the change of a crankset 47 teeth (43 teeth in the original), ha. SUNST...
Factory Mameshiba ULF Clutch Wire
There is no difference with other manufacturers. If there is a difference after replacement, it means that the original wire had deteriorated considerably.
M-TEC Chukyo O-ring Type Oil Filter
I have never compared it to the more expensive Oil Filter, but I have always bought this product and it is a good, inexpensive product with no engine malfunctions.
(4.0)
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING