- Fits:
- KAWASAKI ZRX1200 99-05
- HONDA CB500X 16-19 (Models:3A
- A
- 2AC
- AC)
- ...and more.
This grip could not fit to your motorcycle.
Even if the product describes you can use this, it may not be on your bike.
I got one cuz it was supposed to fit my bike but it didn't. so I asked it selle...Read More - Fits:
- KAWASAKI KH250 ALL MODEL
- HONDA Silver wing(ALL MODEL)
- HONDA Night Hawk(ALL MODEL)
- HONDA DIO(ALL MODEL)
- HONDA CREA(ALL MODEL)
- ...and more.
I bought these to replace softer "comfort" grips the previous owner installed. Immediately, I noticed an improvement in fine throttle control, and feel more certain of my hand positioning. The materia...Read More - Fits:
- YAMAHA
- KAWASAKI
- KAWASAKI
Very happy with this product, these handlebars have a very comfortable riding position on my Royal Enfield Classic 500. I would order againRead More - Fits:
- SUZUKI V-STROM 650 07-09 (Model DL650 K7
- K8
- K9
- L2
- L4
- ...and more.
KIJIMA VANS x CULT Collaboration Grip 7/8-inch
It goes well with the blue w800.
I'm very satisfied with the harmonious color.
The grip is moderate and not slippery.
It became a better w800 with a uniq...Read More - Fits:
- SUZUKI V-STROM 650 07-09 (Model DL650 K7
- K8
- K9
- L2
- L4
- ...and more.
这款我在webike购买的KIJIMA(田岛)VANS × CULT 7/8”握把套,安装在我的川崎Ninja ZX-6R上很合适,这是一款联名的握把套,结合VANS经典纹路,抓握很舒适。Read More - Fits:
- KAWASAKI KH250 ALL MODEL
- HONDA Silver wing(ALL MODEL)
- HONDA Night Hawk(ALL MODEL)
- HONDA DIO(ALL MODEL)
- HONDA CREA(ALL MODEL)
- ...and more.
Recieved these grips quickly, I am in the United States. Excellent quality and feel great in your hand. Will buy more in the future. Read More - Fits:
- YAMAHA GEAR (GEAR) 4KN [Genuine part number]93501-04011 19 [Model name]BA50S/BA50ST [Type]4KN2/4KN3
- YAMAHA GEAR (GEAR) 4KN [Genuine part number]93501-04011 19 [Model name]BA50 [Type]4KN1
- YAMAHA FZR250R 3LN [Genuine Part Number]93501-04011 38(Top and Bottom combined) [Model Name]FZR250R [Type]3LN6/3LN7
- YAMAHA FZR250R 3LN [Genuine Part Number]93501-04011 38(Top and Bottom combined) [Model Name]FZR250R [Type]3LN3/3LN5
- YAMAHA FZR250R 3LN [Genuine Part Number]93501-04011 38(Top and Bottom combined) [Model Name]FZR250R [Type]3LN1
- ...and more.
these steel ball bearing look same as OEM. Buy with confident because IT'S MADE IN JAPAN.. My TW200 had 70k Kilometers done. I replaced my bike ball bearing at 40000km,after that never touched the bea...Read More - Fits:
- YAMAHA GEAR (GEAR) 4KN [Genuine part number]93501-04011 19 [Model name]BA50S/BA50ST [Type]4KN2/4KN3
- YAMAHA GEAR (GEAR) 4KN [Genuine part number]93501-04011 19 [Model name]BA50 [Type]4KN1
- YAMAHA FZR250R 3LN [Genuine Part Number]93501-04011 38(Top and Bottom combined) [Model Name]FZR250R [Type]3LN6/3LN7
- YAMAHA FZR250R 3LN [Genuine Part Number]93501-04011 38(Top and Bottom combined) [Model Name]FZR250R [Type]3LN3/3LN5
- YAMAHA FZR250R 3LN [Genuine Part Number]93501-04011 38(Top and Bottom combined) [Model Name]FZR250R [Type]3LN1
- ...and more.
As I was already replacing the old worn parts for the foot rests, I decided to go for these non genuine ones as they are just ball bearings and I needed a few.
Very well made, exact to specifications...Read More - Fits:
- KAWASAKI
I bought this to install on my Kawasaki Z125 pro. There's no suitable bracket for this bike so, I need to customize it. Stability was immediately noticed once installed. For such a small bike, I need ...Read More - Fits:
- SUZUKI V-STROM 650 07-09 (Model DL650 K7
- K8
- K9
- L2
- L4
- ...and more.
I bought this grips because it is the same as SolePattern by vans, so I expected the gripping power to be better. The grip may feel thicker than other grips, but the grips themselves are very flexible...Read More - Fits:
- HONDA
- HONDA
- HONDA
- HONDA
- KAWASAKI
- ...and more.
I had it on a cb400sb but the Image didn't fit me personally, so I ported it to a w175tr.Installation is not a problem.Self-satisfaction, I guess.Also, the key is harder to turn.Read More - Fits:
- HONDA MBX125(ALL MODEL)
- YAMAHA FAZER(ALL MODEL)
- SUZUKI DJEBEL ALL MODEL
- HONDA CB500F
- HONDA PCX150
- ...and more.
The product is as good as I imagined. I like it because it is the part I touch the most.Read More - Fits:
- SUZUKI ADDRESSV125 [ADDRESS]. g
- SUZUKI ADDRESSV125 [ADDRESS]. sadist
- SUZUKI
- SUZUKI
- SUZUKI
- ...and more.
I can't say how I feel about it because it was damaged before I used it or installed it.Read More - Fits:
- SUZUKI V-STROM 650 07-09 (Model DL650 K7
- K8
- K9
- L2
- L4
- ...and more.
정말 좋은제품입니다 작은 변화이지만 정말 마음에들게 변화했습니다 . 기존에있던 그림은 공기로 손쉽게 제거하였습니다. 별도의 공구없이 손쉽게 교체하였습니다 다만 흰색이라 더러워지는게 눈에 보일정도이지만 이뻐서 용서가 됩니다 .
----------------------------------------------------------
It's a re...Read More - Fits:
- HONDA MBX125(ALL MODEL)
- YAMAHA FAZER(ALL MODEL)
- SUZUKI DJEBEL ALL MODEL
- HONDA CB500F
- HONDA PCX150
- ...and more.
I have Large hands, so OEMGrip was too thin and made me tired. After changing to this product, I don't get tired even after riding for a long time.Read More - Fits:
- KAWASAKI ZRX1200 99-05
- HONDA CB500X 16-19 (Models:3A
- A
- 2AC
- AC)
- ...and more.
The same level of finish and temperature control as pure makes the user's hands comfortable. The best part is that there is no sense of alienation like pure love! It's very satisfying.Read More - Fits:
- HONDA MBX125(ALL MODEL)
- YAMAHA FAZER(ALL MODEL)
- SUZUKI DJEBEL ALL MODEL
- HONDA CB500F
- HONDA PCX150
- ...and more.
I have Large hands and the OEMGrip was too thin and very tiring, but this product has just the right grip.Read More - Fits:
- YAMAHA
- YAMAHA
- YAMAHA
- YAMAHA Virago 250 (XV250) sadist
- YAMAHA
- ...and more.
I really like it
I'll buy it again
Packaging is neat and delivery is fast
I'll spread it around
I'm going to brag
I'll buy it again Read More - Fits:
- SUZUKI ADDRESSV125 [ADDRESS]. g
- SUZUKI ADDRESSV125 [ADDRESS]. sadist
- SUZUKI
- SUZUKI
- SUZUKI
- ...and more.
Worst. I will never buy again. Never buy from them again. The ball adjusting tool is too limp to tighten it. I don't want to deal with this kind of thing.Read More - Fits:
- KAWASAKI ZRX400II 94-08
- KAWASAKI ESTRELLA -06
- KAWASAKI ZR-7/S 99-02
- KAWASAKI ZRX400 94-08
- KAWASAKI ZEPHYR750 RS 91-07
- ...and more.
I used it on the Bar End of a Φ22mm Made by HURRICANEHandlebar. It is a very important part because it will be a guard in case of tipping over. It is inexpensive and easy to replace.Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING