- Fits:
- KAWASAKI ZRX400 -04
- KAWASAKI ZrX1200ZrX1200 DAEG
- KAWASAKI ZRX1200R
- KAWASAKI ZRX1100II
- KAWASAKI ZRX1100
- ...and more.
As always the package reached on time. Tool is very light and serves it purpose. Quality and craft of tool is great and will stand for a long period of time. Great product and recommended to have.Read More - Fits:
- KAWASAKI ZRX400II 94-08
- KAWASAKI ESTRELLA -06
- KAWASAKI ZR-7/S 99-02
- KAWASAKI ZRX400 94-08
- KAWASAKI ZEPHYR750 RS 91-07
- ...and more.
I used it on the Bar End of a Φ22mm Made by HURRICANEHandlebar. It is a very important part because it will be a guard in case of tipping over. It is inexpensive and easy to replace.Read More - Fits:
- SUZUKI GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used.
- KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- ...and more.
[How is it used?I changed XJR400R from OEM Handlebar to this Condor Handle.Was the one you received as per Image?The precision of the construction is good and the shape is cool.Was the installation di...Read More - Fits:
- Others Universal
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- SUZUKI GRASS TRACKER Big Boy -08-8(Carburetor)*Drilling of switch hole is required|*You can use stock side cap. |*It is necessary to change the direction of the throttle cable
- clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
- SUZUKI GRASS TRACKER 09-12 (FI car)*You can use stock side caps.
- ...and more.
Not a lot you can say about handlebars. They look good and seem to be of a high quality, time will tell. However there are a few points worth mentioning. There is a manufacturers sticker where the gri...Read More - Fits:
- SUZUKI GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used.
- KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- ...and more.
Separate Handlebars were out of stock, so I put the Condor Handle on backwards and tilted it forward. It is very forward leaning and narrow, so I think it will be strange to use Large until I get used...Read More - Fits:
- Others Universal
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- SUZUKI GRASS TRACKER Big Boy -08-8(Carburetor)*Drilling of switch hole is required|*You can use stock side cap. |*It is necessary to change the direction of the throttle cable
- clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
- SUZUKI GRASS TRACKER 09-12 (FI car)*You can use stock side caps.
- ...and more.
I replaced Handlebar to immeChain.The height of the handlebar is now much lower.It's so much easier to ride.Read More - Fits:
- YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
- YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
- YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- ...and more.
I put it on my st250, but the OEM handlebar made me look awkward when riding.The quality is not luxurious, but it feels solid!Read More - Fits:
- HONDA FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable.
- HONDA CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID)
- HONDA CB400SF 99-07 NC39 VTEC *Processing of the switch hole is required|* Required side cap (for 18mm ID)
- HONDA CB400SUPER BOLDOR 05-07 NC39 *Processing of switch hole required|* Required side cap (for 18mm diameter)
- HONDA CB400SF 99-07 NC39 VTEC III* requires drilling of switch hole|* requires side cap (for 18mm ID)
- ...and more.
This is a change from Plating of the same type.On the LeftGrip side, there is a paper seal with the product number, ManufacturerMain and product name, which is still difficult to remove.If you could m...Read More - Fits:
- HONDA CB1300 SF 98-02 SC40
- HONDA CB750 92-08 RC42
- HONDA PCX125 12-13 (eSP Engine)
- HONDA PCX150 12-13 KF12
- HONDA VFR400R 89-95 NC30
- ...and more.
I installed it on my Retro Motorcycle.The texture is good and Simple.Read More - Fits:
- KAWASAKI VULCAN900Custom 07-16 VN900B
- KAWASAKI VULCAN900Custom 07-16 VN900B (VN900B)
- KAWASAKI NINJA2 Helmet50RR 08-12 EX250K
- KAWASAKI ESTRELLA CUSTOM -06
- KAWASAKI NINJA250R 13-16 EX250L
- ...and more.
Cables and connectors are fine. Work excelent.
Clamps are included, so it's easy to install.
These cables are for swapping handlebar from low to very high, so if you'd like to install classic medium s...Read More - Fits:
- YAMAHA Bolt CSpecifications 15-16 VN04J
- HONDA STEED600 88-98
- HONDA STEED400 VSE
- HONDA STEED400 VLX
- HONDA STEED400 VLS
- ...and more.
I bought this because the footpeg I was using was damaged in a fall. I ride a Shadow slasher 400 and was able to replace it with no problem. The footpeg itself feels quite heavy. I haven't seen the ex...Read More - Fits:
- KAWASAKI VULCAN900Custom 07-08 VN900B
- KAWASAKI VULCAN900 CLASSIC400 95-03 (VN400A)
- KAWASAKI VULCAN400II 95-03 (VN400A)
- KAWASAKI VULCAN800 95-00
- KAWASAKI VULCAN800 CLASSIC 95-00
- ...and more.
Because Rubber of OEM footpeg has deteriorated, I am thinking whether to change Rubber or footpeg, and I bought this one to change footpeg at all.I thought it would be more suitable for Eliminator or ...Read More - Fits:
- KAWASAKI ESTRELLARS -06 (24mmUP17mmBACK)
- KAWASAKI ESTRELLARSCustom -06 (24mmUP17mmBACK)
- KAWASAKI ESTRELLA 07-16 (FI)(24mmUP 17mmBACK)
- KAWASAKI ZRX400II 94-08 24mmUP 17mmBACK
- KAWASAKI ZRX400 94-08 24mmUP 17mmBACK
- ...and more.
This Part replaces the existing Handlebar Post and changes the position of the Handlebar to a more forward position.It only replaces the existing Handlebar Post.Since the Handlebar is closer to the fr...Read More - Fits:
- YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
- YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
- YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- ...and more.
Replaced the Handlebar width to make it narrower for the VANVAN200 Custom.The Image is approximately half a fist inside and one handful down from OEM.As a result, it is easy to slip through and I am g...Read More - Fits:
- KAWASAKI ZRX400II *Requires drilling of switch hole|*Applicable side cap (for 18mm dia.)|*Cannot be installed on models 05 and later due to interference with the cowl.
- KAWASAKI W400 *Required Switch Hole Drilled
- KAWASAKI ZRX400 -04 *Processing to drill switch holes is required|* Required side cap (for 18mm I.D.)|*Not available for the models after 05 due to interference with the cowl.
- HONDA MONKEY 84-07 (Z50J-1600008-|AB27-1000001-1899999)*With Top Bridge H30 Holder or MONKEY Handle Holder required
- HONDA HORNET250 *Need to drill switch hole
- ...and more.
I reverse engineered it on my XJR1300.I was not satisfied with the position and appearance of the Tommaselli separate handlebar I had previously installed, so I changed to a Pipe Handlebar.This was th...Read More - Fits:
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
- YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- ...and more.
So far, I had installed an ez-fit bar for the zrx1200r, which I happened to find on sale cheap, because I wanted to make the Handlebar black. This bar was a replacement for the Hardy Load Bar medium, ...Read More - Fits:
- KAWASAKI ZRX400 -04
- KAWASAKI ZrX1200ZrX1200 DAEG
- KAWASAKI ZRX1200R
- KAWASAKI ZRX1100II
- KAWASAKI ZRX1100
- ...and more.
When I tried to make a hole without using Hole Guide before, I couldn't make a hole well, but I can make a hole well by using this Hole Guard.Read More - Fits:
- KAWASAKI ESTRELLARS -06 (24mmUP17mmBACK)
- KAWASAKI ESTRELLARSCustom -06 (24mmUP17mmBACK)
- KAWASAKI ESTRELLA 07-16 (FI)(24mmUP 17mmBACK)
- KAWASAKI ZRX400II 94-08 24mmUP 17mmBACK
- KAWASAKI ZRX400 94-08 24mmUP 17mmBACK
- ...and more.
I installed it on my ESTRELLA2017, I was a little worried if the wiring would be enough, but I was able to install it with room to spare. riding position became easier and more natural.There is no pro...Read More - Fits:
- KAWASAKI ESTRELLA CUSTOM 92-06
- KAWASAKI ESTRELLARSCustom 92-06 Estrella RS Custom
- KAWASAKI ESTRELLARS 92-06
- KAWASAKI ESTRELLA 92-06
- KAWASAKI ESTRELLA 07-16 (FI)
It works great and looks great. I've removed it now because it interfered with my Seat when I replaced it with the Kawasaki Reto Solo seat, and it was difficult to remove.Read More - Fits:
- SUZUKI GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used.
- KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- ...and more.
The installation was no problem and I like using it without feeling any fatigue.Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING