- Fits:
- SUZUKI SV650X 21 [Where used] Rear
- SUZUKI GLADIUS650400ABS 10-12 [Used in] rear
- SUZUKI SV650 19-21 [Where used]Rear
- SUZUKI SV650 16-18 [Used in] rear
- SUZUKI SV650 S 16-18 [Used in] rear
- ...and more.
Brembo are a cracking brand when it comes to brake pads. Honestly, they are absolutley awesome. This bike is one of my own and has Brembo retro fitted calipers which does brake heavy and thought I wou...Read More - Fits:
- YAMAHA FZ400
- YAMAHA TW 200E 91 (Models 2JL0
- 4CS1
- 4CS2
- 4CS3
- ...and more.
I put Kijima blade breeder dust cap on my Ducati StreetFighter 1098 and Hayabusa 1300R replacement for stock cap (Hayabusa with Brembo caliper). The stock cap is easy to lose when repalce bracke fruid...Read More - Fits:
- YAMAHA FZ400
- YAMAHA TW 200E 91 (Models 2JL0
- 4CS1
- 4CS2
- 4CS3
- ...and more.
我的摩托车是YAMAHA NMAX155,我在上次更换刹车油的时候把原厂的放空气橡皮冒弄坏了一直没有地方能买到,直到我在webike看到这个KIJIMA 放空气螺丝橡皮盖,这是一款通用的配件,适合大部分摩托车,红色的还比较好看。Read More - Fits:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...and more.
A bit longer than intended for the front caliper. Maybe the pin I received is for the rear. But it fits properly on the front caliper anyway.Read More - Fits:
- BUELL
- BUELL CYCLONE M2 [Cyclone]. 98-04
- BUELL FIREBOLT XB9R [Firebolt]. 02-05
- BUELL LIGHTNING XB9S [LIGHTNING]. 03-05
- BUELL LIGHTNING XB9SX [LIGHTNING]. 05-09
- ...and more.
I used the break pads for my bike and these are great break pads. Last longer and breaking quality is good. Overall performance is great as wellRead More - Fits:
- YAMAHA XJ6 DIVERSION 09 [Used in]Rear
- YAMAHA XJ6 DIVERSION 09 ABS [part used]Rear
- YAMAHA FZ6R 09 [Used in]Rear
- TRIUMPH DAYTONA675 08 [Used in]Rear
- TRIUMPH STREET TRIPLE 08 [Used in]Rear
- ...and more.
I changed my 88 Honda Bros front brakes with these. Excellent grip for a decent price. I would recommend it.
About quality and texture: Excellent
About the feeling of use: My brakes became more ...Read More - Fits:
- HONDA
- HONDA
- HONDA CB223S (MC40)
- HONDA CB400SS (NC41)
- HONDA CL400 (NC38)
- ...and more.
The Master cylinder cover is located on the front section. Black." I thought Balance was bad and bought it atAlthough it was not listed as being for a c125, I checked the size and decided that it woul...Read More - Fits:
- HONDA CB-1 89-91 [Used in]Rear
- HONDA CB400FOUR 97-00 [Used in]Rear
- HONDA BROS650 88-90 [Used in]Rear
- HONDA CB400F 13 [Used in] rear
- HONDA CB400F 13 ABS [part used] Rear
- ...and more.
[How is it used?I ride it in various places such as city driving, commuting, mountain road touring, etc.Was the one you received as per Image?What you receive is just as you see on the Image.Was the i...Read More - Fits:
- HONDA CBR400R 13-21
- HONDA CBR600F 95-98
- HONDA CBR400RR 88-99
- HONDA CBR400R 13-21
- HONDA CBR250RRR 17-21
- ...and more.
This is a replacement from the OEMDon't forget to check the part number and model number.There seem to be many types for CYGNUS, so it seems that we need to be careful not to buy the wrong one.I did t...Read More - Fits:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...and more.
today i change the rear brake rotor and overhaul the caliper. the brake pin has seriously rusted and damaged so i cleaning all the surface of caliper and (not changed caliper piston...and Oring) and l...Read More - Fits:
- SUZUKI GSX400Type S 94-96 [Used point]Front double disk
- HONDA Silver wing400 02-08 [Used in]Rear
- YAMAHA MAJESTY125 01-03 [Used point]Front
- YAMAHA MAJESTYS 14-21 Installed at the same time as the stock shim [Location]Front
- HONDA Silver wing 01-08 ABS [part used]Rear
- ...and more.
I replaced OEMPad→Metallica→brembo in that order, and the controllability etc. is fine, but the Brake squeal just before stopping. (Noise Level) The "A" was so unusual that it could not be used for to...Read More - Fits:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...and more.
First, let me say that this is a special case based on a combination of several conditions.After cleaning the Caliper, I put it back together, tightened the pad pin, and was finishing up by tightening...Read More - Fits:
- HONDA CBR400R 13-21
- HONDA CBR600F 95-98
- HONDA CBR400RR 88-99
- HONDA CBR400R 13-21
- HONDA CBR250RRR 17-21
- ...and more.
Neither good nor badBraking power was sufficient.Aggression to DISC does not seem to be that high.Read More - Fits:
- SUZUKI SV650X 21 [Where used] Rear
- SUZUKI GLADIUS650400ABS 10-12 [Used in] rear
- SUZUKI SV650 19-21 [Where used]Rear
- SUZUKI SV650 16-18 [Used in] rear
- SUZUKI SV650 S 16-18 [Used in] rear
- ...and more.
對brembo 這個品牌抱有一定期望,但當貨品來到時,看到剎車片的品質欠佳,表現出現氧化變色變質的感覺。不過,在送貨方面時間也算快,大概都是幾天工作天就已經送達,而且送貨員效率和服務也很高,整體上都是可以的,但產品的質素真的有待改善。
----------------------------------------------------------
It has some expec...Read More - Fits:
- HONDA CBR400R 13-21
- HONDA CBR600F 95-98
- HONDA CBR400RR 88-99
- HONDA CBR400R 13-21
- HONDA CBR250RRR 17-21
- ...and more.
I think it works better than NORMAL.Red is now the Accent color and looks great.Read More - Fits:
- HONDA CB-1 89-91 [Used in]Rear
- HONDA CB400FOUR 97-00 [Used in]Rear
- HONDA BROS650 88-90 [Used in]Rear
- HONDA CB400F 13 [Used in] rear
- HONDA CB400F 13 ABS [part used] Rear
- ...and more.
Replaced on a 16 year old HONDA400X. I mainly commute to work and ride around town, so I decided on this product after reading the impressions of many people. I was able to install it with only a litt...Read More - Fits:
- HONDA CBR400R 13-21
- HONDA CBR600F 95-98
- HONDA CBR400RR 88-99
- HONDA CBR400R 13-21
- HONDA CBR250RRR 17-21
- ...and more.
Used in CYGNUS.Personally, I prefer the way the braking force rises proportionally from the Brake lever input.It is recommended for those who make a kick rack to turn, enter a Corner while leaving a B...Read More - Fits:
- YAMAHA FZ400
- YAMAHA TW 200E 91 (Models 2JL0
- 4CS1
- 4CS2
- 4CS3
- ...and more.
Great product and quick delivery a pleasure to deal with, highly recommend. Great service from Webike Japan the product arrived to Australia in a few days, very happy!Read More - Fits:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...and more.
For those who want to upgrade with OEM replacementIt's hard to lick, hard to decay, and also cool.Recommended for people who ride Honda motorcycles, but be careful with the length.Read More - Fits:
- YAMAHA MT03 15-21 [Number of items used]6
- YAMAHA MT-10SP 17- [Number of units used]16
- YAMAHA MT-09 14-21 [Number of items used]12
- YAMAHA MT-07 14-21 [Number of items used]10
- YAMAHA MT-09SP 14- [Number of units used] 12
- ...and more.
How far can we use it?I want to know the wear limit value.It was rattling, but I could use it if I wanted to.If you say it's a life-saving part, I'll replace it as soon as possible.I would like to see...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING