HONDA TL125 IHATOVO Custom Parts

Its engine adopted the CDI ignition system. It was persistent and good for trial rides. It adopts a semi-air system for its front suspension and an inverted pressurizing damper for its rear.

Displacement	124	Engine Type	Air-cooled/4-stroke/OHC/2 Valve/Single Cylinder
Maximum Output (ps)	8.5ps(6.0 kw)/8000rpm	Maximum Torque (kgf/m)	0.86kg・m(8.4N・m)/4000rpm
Vehicle Weight (Dry Weight)	95	Fuel Tank Capacity liter	-

Products Details

DENSO Iridium Power Plug IX24

How it was purchased.Before the ignition system was strengthened, it was NGK D8EA of OEM specification for more than 30 years, but now it is using Brisk ZC.I was looking for a JAPAN high performance Plug to replace it in the near future.Originally, I wanted to try the Moto DX with D-Shape electrodes...

Products Details

KITACO Full Exhaust System Gasket (1 Set of 2pcs.)

I used this product on my IHATOVO and I am satisfied with the size and the fact that I was able to replace the exhaust system without any problems.

Products Details

BRISK Brisk ZC/ZS Plug [BR14ZC]

The ZC is definitely a better fit for single cylinder motorcycles than the LGS, and you can feel the grainy explosion that is typical of the Uotani Coil.

Products Details

BRISK BRISK LGS Plug [BOR14LGS]

Because the motorcycle is still new, it is not possible to feel that it has dramatically improved or changed by changing the Plug, but I could understand the feeling that the torque has increased. It will change drastically if it exchanges with this Plug with an old motorcycle. It is a product that ...

Products Details

ALCAN hands iGrip for Grip Φ22

Fit with my bike Honda Rs150r, easy to install. Very comfortable with the this rubber. Fast delivery, wrap well and good quality with the price.

Products Details

BRISK BRISK LGS Plug [BOR12LGS]

I did a lot of research before deciding to buy it, but the good news is that it was only the beginning.I also tried to use Direct Ignition, but I couldn't even run the engine properly anymore. My motorcycle is oil cooled engine and TMR Carburetor.I'm not sure if it's a good thing or not, but I'm not...

Products Details

ALCAN hands Extreme Grip PCG-011

End cap may be a little Slant in structure.The dimensions of the Throttle side are too Exactly, so a lot of force is needed to insert it.Considering the strength of each part, I think you need to insert it slowly with PRESS.Also, if you insert it to the root, it will interfere with the Handlebar in ...

Products Details

NGK Iridium Plug DR8EIX 4816

If you have replaced the ignition system with NGK Racing cable, then the plug should be Windshield IRIDIUM.The Exhaust System is on fire.If it is a normal vehicle, Windshield IRIDIUM does not need to be replaced so quickly, so it may be just right for motorcycles with poor maintainability.

Products Details

ALCAN hands Black Rubber Grip Gamma

Does what it needs to do. I mean it's cheap and holds my hands just fine like the stock waffle grips. If you have a handguard, you have to cut it though. It isn't something like a proper enduro grip with removable covers and all. But for the price, this is hard to beat. Maybe I'll get another pair i...

(4.0)

(4.0)

(0.0)

(4.0)

(2.0)

(5.0)

(4.0)

(5.0)

(0.0)

(0.0)

(5.0)

(0.0)

(0.0)

(0.0)

(0.0)


Exhausts (6) 3.5	Engine Parts (11) 4.4	Handles & Control Parts (38) 4.1
Exhaust Gaskets (6)	Intake Parts (1) Engine (1) Ignition Parts (9)	Grips (34) Handlebars (2) Controls (2)
All Products	All Products	All Products


Electrical (47) 4.1	Suspensions / Rearsets / Wheels / Swingarms (3)
Lights (47)	Wheel Parts / Accessories (3)
All Products	All Products

HONDA TL125 IHATOVO

Recently viewed products