- Fits:
- HONDA LITTLE CUB 99-13
- HONDA LITTLE CUB 98-13 Kick type
- HONDA CUB press 50 91-11
- HONDA DELUXE 91-11
- HONDA SUPER CUB70 91-99
- ...and more.
As per manufacturer, sprocket material able to last above 10000km & more. Pricing was reasonable for good material used.Have not install yet, will see how it goes & revert later on.Read More - Fits:
- HONDA GROM 13-18
- HONDA Monkey125 18-21
- HONDA SUPER CUB C125 18-21
Used for Grom in the first semester.The OEM changed it to 15-34 while I changed mine to 15-32. (Push it to the motorcycle shop.) Use.I tuned it to the highest speed.It's very durable, isn't it?I haven...Read More - Fits:
- HONDA LITTLE CUB 99-13
- HONDA LITTLE CUB 98-13 Kick type
- HONDA CUB press 50 91-11
- HONDA DELUXE 91-11
- HONDA SUPER CUB70 91-99
- ...and more.
[How is it used?I installed these on my 2015 Super Cub 110.OEM is 14T, so I installed 15T which is one up.Was the one you received as per Image?As per ImageCompared to the OEM, it was about a size lar...Read More - Fits:
- HONDA LITTLE CUB 99-13
- HONDA LITTLE CUB 98-13 Kick type
- HONDA CUB press 50 91-11
- HONDA DELUXE 91-11
- HONDA SUPER CUB70 91-99
- ...and more.
With the stock 2018 Honda Monkey 125cc engine the motorcycle would struggle with large hills in fourth gear. After some research it was suggested to either go down one tooth on the front sprocket or g...Read More - Fits:
- HONDA LITTLE CUB 98-13 Kick type 7.0mm offset (420 conversion setting)
- HONDA XR50 Motard 05-07 7.0mm offset (420 conversion setting)
- HONDA CustomSUPER CUB 50 91-98 7.0mm offset (420 conversion setting)
- HONDA SUPER CUB 50 91-19 7.0mm offset (setting for 420 conversion)
- HONDA CUB press 50 91-11 7.0mm offset (setting for 420 conversion)
- ...and more.
I wanted to run a little lower in the rpm when flushing at 50-60 km, so I made the change.The Driven is still at 34T, so you can feel a slight acceleration and a drop in top speed 。 It feels like it c...Read More - Fits:
- HONDA GROM 13-18
- HONDA Monkey125 18-21
- HONDA SUPER CUB C125 18-21
I used it on my Honda Grom, which I use for commuting and touring, and the Sprocket was getting low, so I bought this product and installed it. It was easy to install, even for me as an amateur! It lo...Read More - Fits:
- HONDA LITTLE CUB 99-13
- HONDA LITTLE CUB 98-13 Kick type
- HONDA CUB press 50 91-11
- HONDA DELUXE 91-11
- HONDA SUPER CUB70 91-99
- ...and more.
Changed front and rear Sprockets at the same time to replace the Chain I installed a MADE IN SUNSTAR Sprocket on a different motorcycle before I thought I'd make in sunstar for the CUB as well … but T...Read More - Fits:
- HONDA LITTLE CUB 99-13
- HONDA LITTLE CUB 98-13 Kick type
- HONDA CUB press 50 91-11
- HONDA DELUXE 91-11
- HONDA SUPER CUB70 91-99
- ...and more.
I bought it because I have used it on a large motorcycle, so I thought that durability is not a problem My 15T is an STD, but when I installed the AXIS lab tube, the torque was lost underneath As a re...Read More - Fits:
- HONDA LITTLE CUB 99-13
- HONDA LITTLE CUB 98-13 Kick type
- HONDA CUB press 50 91-11
- HONDA DELUXE 91-11
- HONDA SUPER CUB70 91-99
- ...and more.
Bore up the GROM and changed the power to Front16T Buy toThere are two types of screw holes for fixing (one wide and one narrow), but in the case of GROM OEM, the wide screw hole is used UseSprocket c...Read More - Fits:
- HONDA LITTLE CUB 99-13
- HONDA LITTLE CUB 98-13 Kick type
- HONDA CUB press 50 91-11
- HONDA DELUXE 91-11
- HONDA SUPER CUB70 91-99
- ...and more.
Since we exchange Chain and Rear sprocket, we exchanged at the same time.I think that it is durable because it was only a little decreasing.Read More - Fits:
- HONDA LITTLE CUB 99-13
- HONDA LITTLE CUB 98-13 Kick type
- HONDA CUB press 50 91-11
- HONDA DELUXE 91-11
- HONDA SUPER CUB70 91-99
- ...and more.
MONKEY 106cc I exchanged with Chain at the time of Bore up.After that, I ran over 2,500 km, but of course there was no 'waka' character.Originally from the OEM 13T as a countermeasure against ...Read More - Fits:
- HONDA LITTLE CUB 99-13
- HONDA LITTLE CUB 98-13 Kick type
- HONDA CUB press 50 91-11
- HONDA DELUXE 91-11
- HONDA SUPER CUB70 91-99
- ...and more.
Recommended if you do not put out 100 kmEven if you use it for 80 kilometers for people it is Front 13 Rear OEMAcceleration is totally differentYou should change Chain tooOEM extends quicklyOf course,...Read More - Fits:
- HONDA LITTLE CUB 98-13 Kick type 7.0mm offset (420 conversion setting)
- HONDA XR50 Motard 05-07 7.0mm offset (420 conversion setting)
- HONDA CustomSUPER CUB 50 91-98 7.0mm offset (420 conversion setting)
- HONDA SUPER CUB 50 91-19 7.0mm offset (setting for 420 conversion)
- HONDA CUB press 50 91-11 7.0mm offset (setting for 420 conversion)
- ...and more.
Hi all,
This product is of the highest quality and finish, fits and works great. I would highly recommend this item to anyone. Read More - Fits:
- HONDA LITTLE CUB 99-13
- HONDA LITTLE CUB 98-13 Kick type
- HONDA CUB press 50 91-11
- HONDA DELUXE 91-11
- HONDA SUPER CUB70 91-99
- ...and more.
Borrowing the wisdom of the predecessors, I am only Front sprocket but changed to 15 T of OEM 14 T → SUNSTAR.Then, how exactly, as the predecessors are verifying, it runs at the 2nd and 3rd speeds.I a...Read More - Fits:
- HONDA LITTLE CUB 99-13
- HONDA LITTLE CUB 98-13 Kick type
- HONDA CUB press 50 91-11
- HONDA DELUXE 91-11
- HONDA SUPER CUB70 91-99
- ...and more.
I also exchanged sports ROCKET with Chain when making T - Shonen 's Ronzui. The number of teeth is NORMAL. Shaft of Drive sprocket ROCKET got shaved after traveling about 5000 km and it became una...Read More - Fits:
- HONDA LITTLE CUB 99-13
- HONDA LITTLE CUB 98-13 Kick type
- HONDA CUB press 50 91-11
- HONDA DELUXE 91-11
- HONDA SUPER CUB70 91-99
- ...and more.
Since the Front side can be attached only by adjusting the chain,First I replaced Front.Manufacturer is good, durability is also good Manufacturer, so I think it is a very good product.Next time I wil...Read More - Fits:
- HONDA LITTLE CUB 99-13
- HONDA LITTLE CUB 98-13 Kick type
- HONDA CUB press 50 91-11
- HONDA DELUXE 91-11
- HONDA SUPER CUB70 91-99
- ...and more.
On the ascending slope it shows some mottling NORMAL's Grom.Just replacing FSprocket with 14T will improve considerably.The connection between GEAR is also improved, and it runs with Quickly.Is it...Read More - Fits:
- HONDA LITTLE CUB 99-13
- HONDA LITTLE CUB 98-13 Kick type
- HONDA CUB press 50 91-11
- HONDA DELUXE 91-11
- HONDA SUPER CUB70 91-99
- ...and more.
I usually use KITACO, but I tried it because the price did not change so much. I knew for the first time that SUNSTAR is doing an initiative to the Gold Infant Training Group Gold. From price, perform...Read More - Fits:
- HONDA LITTLE CUB 99-13
- HONDA LITTLE CUB 98-13 Kick type
- HONDA CUB press 50 91-11
- HONDA DELUXE 91-11
- HONDA SUPER CUB70 91-99
- ...and more.
I tried Small from Grom 's Drive sprocket from 15 T of OEM to 13 T.Is the feeling of Torque increased by 15% by experience, of course, the maximum speed is depressed, you can feel a strong vibrati...Read More - Fits:
- HONDA GROM 13-18
- HONDA Monkey125 18-21
- HONDA SUPER CUB C125 18-21
Previously, I bought things from Asia products but I was about to kill my life.We recommend that you buy a reliable Brand even after a little expensive.The weight is so light that it gets better.Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING