- Fits:
- HONDA
- HONDA
- HONDA
更换供电插头后,可以安装到NC750S Gen.1上,整车质感有提升。用料做工虽不及SP 武川,但价钱也比其更合理,物有所值。如果有熏黑外观的更好,与原车转向灯相搭配。Read More - Fits:
- HONDA CT125CT110 HUNTER CUB 20-23
- HONDA GROM
- HONDA MONKEY125 19-22
- HONDA PCX125 11-16
- HONDA PCX150 11-16
- ...and more.
I know hevy weight balancer is needed to reduce vibration during long touring, but I need to reduce weight for Hayabusa, I've replaced POSH solid bar end for Haya and I've reduced the weight by 600gr ...Read More - Fits:
- HONDA FORZA 18 MF13
- HONDA MONKEY125 19-22
- HONDA FORZA MF10
- HONDA FAZE
- HONDA CBR250R 11-18
- ...and more.
At 3 times the OEM bar end weights, it certainly helped to dampen vibrations to a more acceptable level. Fit and finish is very good. However wish the spacers for the Honda bar end could be better des...Read More - Fits:
- HONDA Forza350
- HONDA CB500X
- HONDA CBR500R
- SUZUKI GSX1400 01|06-07
- HONDA CB300R
- ...and more.
I use it on my Gixxer 150 and it's cool. Gixxer will come with one for Honda, just for reference.Read More - Fits:
- HONDA CBR500R
- HONDA Forza350
- HONDA CB300R
- HONDA CB500X
- SUZUKI GSX1300R -18
- ...and more.
I installed it on my ADV150.When I removed the OEM Bar End of ADV150, it weighed 220g and was quite heavy.I decided on this one because I felt the need to have a Bar End that was close in weight.(Befo...Read More - Fits:
- HONDA CBR500R
- HONDA Forza350
- HONDA CB300R
- HONDA CB500X
- SUZUKI GSX1300R -18
- ...and more.
배송이 빠르고 제품이 너무 만족스럽습니다.
저는 위바이크에서 정말 많은 제품을 주문했습니다.
하지만 이런 질좋고 상태 좋은 제품은 정말 믿을만 합니다.
바이크를 사랑하고 좋아하시는 여러분들 께서는
이제품을 추천 드립니다.
믿을수 있는 제품, 빠른 배송, 아주 만족스러운 결과가 나와서...Read More - Fits:
- HONDA CBR500R
- HONDA Forza350
- HONDA CB300R
- HONDA CB500X
- SUZUKI GSX1300R -18
- ...and more.
A very good product as it always is with made in Japan. Made with precision machining and precision fitment. No need for modifications for fitment. Simply bolt on. It has a nice weight to it compared ...Read More - Fits:
- HONDA Forza350
- HONDA CBR500R
- HONDA CB300R
- HONDA CB500X
- SUZUKI GSX1400 01|06-07
- ...and more.
I was hoping it would work with Heavy weight, but I wasn't sure.The OEM is also quite heavy, so it feels 20-30% heavier.It's a four-cylinder, so it may not be too numb to begin with.The non-heavy weig...Read More - Fits:
- HONDA CBR500R
- HONDA Forza350
- HONDA CB300R
- HONDA CB500X
- SUZUKI GSX1300R -18
- ...and more.
From the time of delivery. (OEM) The Bar End was floating a bit, and when I asked the dealership, they said it was normal for it to float a bit. So I rode it for a year and a half, but it got looser a...Read More - Fits:
- HONDA Forza350
- HONDA CB500X
- HONDA CBR500R
- SUZUKI GSX1400 01|06-07
- HONDA CB300R
- ...and more.
Here are some photos of it installedThis is the kind of Champagne gold that looks like thisLine of Gold on the Body with the Exactly shades and it's great!As I drove it further, I'll also write about ...Read More - Fits:
- HONDA Forza350
- HONDA CB500X
- HONDA CBR500R
- SUZUKI GSX1400 01|06-07
- HONDA CB300R
- ...and more.
The Bar End on the Left was lost while running and I needed to install a new one My CBR250R has the gold bar end as well as the gold bar end The color of this bar end is brighter gold which can be cal...Read More - Fits:
- HONDA Forza350
- HONDA CBR500R
- HONDA CB300R
- HONDA CB500X
- SUZUKI GSX1400 01|06-07
- ...and more.
You can pimp a 2018 NC42I thought it was just for looks, but the Handlebar vibration is clearly reducedA little expensive, but I recommend itRead More - Fits:
- HONDA Forza350
- HONDA CBR500R
- HONDA CB300R
- HONDA CB500X
- SUZUKI GSX1400 01|06-07
- ...and more.
I put it on the 2018 MODEL of the Ninja 650It is not suitable for this model of car, but it can be attached to the carIn the Pipe of the Handlebar, there is an Inner Weight with the Tap of M6 cut into...Read More - Fits:
- DUCATI HYPERMOTARD821 14
- KAWASAKI Ninja250 18-19
- KAWASAKI Ninja250SL 15-16
- KAWASAKI Z250SL 16-17
- KAWASAKI ZX-25R 21
- ...and more.
Installed on a 2016 Z1000The Lime green Filler Cap is a good fit for the Lime green body, says my self SatisfiedRead More - Fits:
- HONDA Forza350
- HONDA CB500X
- HONDA CBR500R
- SUZUKI GSX1400 01|06-07
- HONDA CB300R
- ...and more.
I switched to this product to give it an overall uniform lookI'm very happy with the product, build, Material and colorHowever, note that it's hard to get a NORMAL Bar EndInstead, this Bar End can be ...Read More - Fits:
- HONDA Forza350
- HONDA CBR500R
- HONDA CB300R
- HONDA CB500X
- SUZUKI GSX1400 01|06-07
- ...and more.
Single cylinder MONKEY has quite a bit of vibration of the handlebar at the time of neutral, and when running It is much reduced, but I chose the biggest and heaviest Posh for my concern The vibration...Read More - Fits:
- HONDA Forza350
- HONDA CBR500R
- HONDA CB300R
- HONDA CB500X
- SUZUKI GSX1400 01|06-07
- ...and more.
I have the intention to reduce the 'micro' vibrations of the handle bar by placing extra weight at the end of the bar. I am glad to say the result is good and better than expected especially at lower ...Read More - Fits:
- HONDA Forza350
- HONDA CBR500R
- HONDA CB300R
- HONDA CB500X
- SUZUKI GSX1400 01|06-07
- ...and more.
This POSH Ultra Heavy Weight Type Bar End is more than a double heavier than my stock bar end. It can improve the steering stability when I driving.Read More - Fits:
- HONDA Forza350
- HONDA CBR500R
- HONDA CB300R
- HONDA CB500X
- SUZUKI GSX1400 01|06-07
- ...and more.
i have honda ps250
mf06 forza brother model
this heavy weight bar end install
nothong problem very easy.
ans looks very nice
and handle bar vibrate delete...Read More - Fits:
- HONDA Forza350
- HONDA CB500X
- HONDA CBR500R
- SUZUKI GSX1400 01|06-07
- HONDA CB300R
- ...and more.
I don't know why the photo can not be uploaded previously.So i decided to upload again.
This POSH Solid Type Bar End perfectly fits my honda cb190r (year 2017). But the weight is a bit lighter than...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING