(0)
33 Reviews View type:
Fits:- HONDA MONKEY125 JB02 All models
- HONDA glom JC61/75 All models
It's rare and common to miss a shift when moving up to 3rd or 4th gear because you can't raise your toes enough.I'd like to adjust the ROD, but the OEM is just a stick, not adjustable.The external pil...Read More- Fits:
- HONDA MONKEY125
As for the product, still, it has not arrived, but there is a product introduction of Black and Silver in the photograph on the Net screen, and it should have ordered Black Anodized seeing the photogr...Read More - Fits:
- HONDA MONKEY125 JB02 All models
- HONDA glom JC61/75 All models
[How is it used?"Enjoying a nice holiday in a quiet neighborhood. happen to ride MONKEY 125 It was attached to the(I don't commute or do long runs.)Was the one you received as per Image?Yes, it was as...Read More - Fits:
- HONDA 400X NC47
- HONDA CB1000R SC80
- HONDA CB1100 SC65
- HONDA CB125R 18-
- HONDA CB1300SF/SB SC54
- ...and more.
Excellent product. Good build quality. Easy to install. No modifications needed for installation. Simply bolt on. Much better than factory foot pegs. More grip, more control, more footing more everyth...Read More - Fits:
- HONDA MONKEY125
Beautiful quality machine work but my kit was missing two countersunk screws to attach master cylinder and the rear brake pedal lacks adjustment. It is too low.Read More - Fits:
- HONDA Monkey125 18-21
The texture and accuracy are both good, especially the Black Anodized.Before installation, it is recommended to read the manual and write the number on the manual with Magic before installation. I thi...Read More - Installed on MONKEY125I didn't like the squishy feel of NORMAL, so I installed this product.Pushing feeling has been changed and the direct feeling of Shift has been improved.However, please note that...Read More
- Fits:
- HONDA MONKEY125 JB02 All models
- HONDA glom JC61/75 All models
This is the second time to write a comment on Shift link made by KITACO.Impressions of the former and the latter, I also read the impressions of M company G company, but this price is made by FOR JAPA...Read More - Fits:
- HONDA MONKEY125 JB02 All models
- HONDA glom JC61/75 All models
Maybe it's different?It is the extent that the shift of Up and Down has changed, but the entry of N has improved.I think that it is a good product of the costumer because the shift position can be adj...Read More - Fits:
- HONDA MONKEY125 JB02 All models
- HONDA glom JC61/75 All models
[How is it used?I installed MONKEY125 in my car.It didn't change by Shift error due to lack of control and became Neutral everywhere, causing a blown out.The reason for this may be because the play of...Read More - Fits:
- HONDA MONKEY125 JB02 All models
- HONDA glom JC61/75 All models
The GEAR is too high for the standard position of GROM. First of all, I put it on the Rear Maintenance Stand, prepared 10mm Spanner etc., laid down on the rug and removed it. The manual says to remove...Read More - When I look at your reviews, it seems that each one feels differently, but I can feel the effect very well in my groms, and Shift change is settled pleasantly.Read More
- Fits:
- HONDA MONKEY125 JB02 All models
- HONDA glom JC61/75 All models
Shift Pedal's "Up. I bought it because it was hard for me.It's possible to lose it in OEM, but if you're going to lose it anyway, it's better to be able to fine tune it afterwards, so I built it in.If...Read More - I used it on my MONKEY125 that I just received a few days ago.A few years ago when I was driving my predecessor Grom, I often stepped on Pedal three times because I didn't feel Firmly when shifting ch...Read More
- Fits:
- HONDA MONKEY125
I bought the Rearset Kit. And its has some Scratches on the Heel. Webike and Over Racing accept to change for me with the heel. But when i receive the Turn Back Package, So very big Surprised, not onl...Read More - Fits:
- HONDA MONKEY125
- HONDA HORNET900
- HONDA HORNET600
- HONDA X4
- HONDA VTR800
- ...and more.
I lowered the Handlebar on MONKEY125 so the riding position is a little tighter.I didn't want to spend enough gold to change to Rear Sets, so I installed this one as a trial run and it became dramatic...Read More - Fits:
- HONDA 400X NC47 [Genuine part number]24781-KR3-770
- HONDA 400X NC47
Possible [Genuine part number 24781-KR3-770 - HONDA 400X NC56 [Genuine part number]24781-KR3-770
- HONDA BENLY CD125T (BENLY50) CD125T [stock number]24781-KR3-770
- HONDA CB1100 SC65 [Genuine part number]24781-KR3-770
- ...and more.
I bought it because it was too much trouble to look up the OEM Parts part number. I have no problems with the texture or anything else. It is cheap and this is enough for me because it is a consumable...Read More - Fits:
- HONDA MONKEY125 (JB02-1000001-)
- HONDA glom (JC61-1000001-1299999-)(JC75-1000001-)
- HONDA glom (JC61-1000001-1300001-)(JC75-1000001-)
- HONDA glom (JC61-1000001-1299999-)
- HONDA glom (JC61-1000001-1300001-)
- ...and more.
At first, I had no idea what the hell this product was Where in the world is this stick attached? The description makes sense, it's the stick that's stopping the footpeg, the footpeg's Base and the th...Read More - Fits:
- HONDA 400X 16-21 NC47 H type
- HONDA CB1100 SC65
- HONDA CB125R 18
- HONDA CB1300SUPERTouring SC54
- HONDA CB1300 SF SC54
- ...and more.
One day when I was happily riding the mountain roads in the groms, I was so lean that I scraped my footpegs I can't do it, but because of my riding habits, the toes of my Shoes get caught under the fo...Read More - Fits:
- HONDA glom JC61
- HONDA glom JC75
- HONDA MONKEY125 JB02
I bought it as an ingredient for making my own Rear SetsIt's sold as a Shift link for MONKEY 125 and Grom, but frankly This is a regular Pillow ballLINKI thought about buying it as a Single Item at Mo...Read More
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING