HONDA MSX125 (GROM) Suspensions / Rearsets / Wheels / Swingarms

Along with replacing the footpeg plate (OEM product in a different color), we also changed the footpeg itself. The price is not so bad, but I chose this product because I do not like the appearan...

* About quality and texture, Impressive looking shock with it's much larger in diameter spring coils are made from steel and powder coated red, while the shock body is made from steel and finishe...

Grom, which makes my butt hurt anyway.
OEMRear shock that will make you want to STAND after 30 minutes of riding.
Since the damping can be adjusted, I set it at around the second level from...

Compared to NORMAL, the movement will definitely be better.
I gave him two of Rear's Sprockets, but maybe the Chain link should have been 108?
(I made 110, but I felt it was a bit long)

This is one of the few products that can be set on the softer side, while many suspensions are stiffer than OEM. I like it because I want to move the suspension well anyway. I have no problem wit...

I bought a new Grom, and as a preliminary information, all the existing users "OEM sass is a free stick." I bought it even before I took delivery of the car because I was REVIEWING it.
OEM sus...

JC75

Everyone says to remove the Cowl, but the Cowl can be replaced without removing it at all.
I was able to remove the mudguard and replace it in less than an hour if I had one of the...

Replacement for the OEM BALI Kata GarbageShock.
The shock absorbing capacity has been improved to free you from the pain in your ass.
The cost is good, and if you look for something cheaper...

I put it on my Grom JC75.

I chose Mr. Mukawa for his peace of mind among many others.
I swapped it out to counter the Grom's unique butt-ache problem, but I wasn't impressed.

I t...

Disappointed in the quality of these, got scratches very easily and I was expecting more from takagewa. They should make it from better materials to withstand putting it on. Looks nice but unless...

Design feel premium. Bery solid build. The material really high quality. For most brand I've seen. I'll recommend the rear set for hrom riders

As I get used to riding the Grom, I feel uncomfortable with the footpeg that is closer to the front.
I felt the desire to put on Rear Sets and relieve my frustration.
I couldn't stand it an...

[How is it used?
Street Riding & Circuit

Was the one you received as per Image?
Almost as shown in the Image

Was the installation difficult?
The swing arm was misaligned wh...

About quality and texture: I am happy with the quality of the rearsets kit from Over Racing. A really nicely styled product that is machined from aluminium with a black anodised finish that compl...

[How is it used?
Circuit
Was the one you received as per Image?
Street Image
Was the installation difficult?
The structure of the footpeg cannot be removed without pulling out the ...

The cut-out appearance and the radial caliper give it a racing machine feel. The precision of the parts is high and the position of the caliper does not require any adjustment.
Instruction Man...

I really wanted to replace the OEM footpeg because it was too large and didn't look good, and most importantly, it was in a low position.
The installation took about 3 hours as I worked while ...

The foot position is not as far back as I thought it would be, which is really just fine.
(Position is still deFault).
Since the Tandem Footpeg part is a separate part, I removed and instal...

OVER's Rear Sets were introduced to the JC92 Grom.
Silver anodized texture is very good.
Also, before I bought it, it said 123mm Back, 57mm Up.
I thought it was too BACK.
The grom ori...

I installed it on my JC75.
Rear Sets for Down Type (For Type 2) There was also a
Because YOSHIMURADown Type is installed.
For Down Type Rear Sets, the mounting holes are
It's not a go...

I was able to get a tightly Shift feel.
It took me a little time to get used to the N outing because the feeling was different from the NORMAL one.

The work itself is easy, but you will...

Shift wobble is reduced by half, and GEAR can be easily inserted.
Recommendation.

[How is it used?
When changing tires or sprockets by removing the rear tire
Was the one you received as per Image?
Yes
Was the installation difficult?
It was very easy to replace t...

It was installed at the same time as Over's Rear Sets were installed.
I used to install KITACO's Shift link for about 6 months.
The GEAR can be raised and lowered more smoothly than in the ...

I was very pleased with the items and service from webike. The swingarm was perfect and exactly what I was expecting, fits perfectly and looks great. The shipping was fast to USA and customer ser...

In my case, since I put on this product after installing the Rear Sets, the shift feel has changed considerably, and the overall feel has changed to a snap feeling, making it much easier to enter...

Neutral is hard to enter and sometimes GEAR does not enter well, so I installed it to improve the situation. I was able to install it without any trouble by watching a you tube video for referenc...

My groms are set to reverse Change shiftSpec. which makes it even more difficult to change gears, even though it is difficult to change gears.
I did a test run after putting Mr. Firmly on and ...

In addition to the appearance, the Merit is that the suspension movement is less likely to be disturbed due to its high precision, the chain alignment is less likely to go out of alignment, the w...

* About quality and texture, This part is machined from solid aluminium, the design has a rib built-in for strength and the bearing is sealed requiring no maintenance. * About the feeling of u...