- Fits:
- HONDA
- HONDA
- HONDA SmartDio Z4
- HONDA SmartDio DX
- HONDA ZOOMER(ruckus)
- ...and more.
We will test the performance and durability in the futureThe OEM is 13g, so I bought 10g and planned to use half of it, but the OEM rollers got worn out and hand (of a clock)I used all of them because...Read More - Fits:
- HONDA
- HONDA
- HONDA
- HONDA
- HONDA
- ...and more.
Searching the Net for instructions before the AF 34 air cleaner replacement, Weight If you remove the GEAR? part, you will not have to worry about it Replacing the WR itself was so easy that even my 6...Read More - Fits:
- HONDA
- HONDA
- HONDA
- HONDA
- HONDA SmartDio Z4
- ...and more.
The Weight Roller is a consumable item and if it doesn't fit, I won't use it next time if it's in the middle of setting up, but it was a little worn out after 200m.Is it soft? Or is it just the way it...Read More - Fits:
- HONDA
- HONDA
- HONDA
- HONDA
- HONDA
- ...and more.
The Weight Roller is a consumable item and if it doesn't fit, I won't use it next time if it's in the middle of setting up, but it was a little worn out after 200m.Is it soft? Or is it just the way it...Read More - Fits:
- HONDA
- HONDA
- HONDA
- HONDA
- HONDA
- ...and more.
Weight Roller is a consumable item, and if it is set up, there is almost nothing to use next unless it runs, but if I ran as normal as 200 m, I was cutting a little.Is it soft or is it compatible with...Read More - Fits:
- HONDA
- HONDA
- HONDA
- HONDA
- HONDA
- ...and more.
Since it was cheap in stock with inventory, I tried it made by ALBA this time.From the price it is necessary to see how much durability is, but Quantity : 1 Set of 6pcs. So this price is attractive.Read More - Fits:
- HONDA Dio (2 Cycles) AF18
- HONDA Dio (2 Cycles) AF25
- HONDA Dio (2 Cycles) AF27
- HONDA Dio (2 Cycles) AF28
- HONDA Livudio SR AF28
- ...and more.
I installed it in the DIO of the AF62 which I bore up using Takegawa's Kit.Especially processing etc.. Also, it is not necessary.It was clearly lighter by OEM ratio, I felt Throttle's Response...Read More - Fits:
- HONDA
- HONDA
- HONDA
- HONDA
- HONDA
- ...and more.
I installed it on AF 27 type SUPER DIO. The immovable car is Large mortar, Lever is bent. This DIO was also bent. So it's an exchange. Brand did not pay particular attention, but could be installe...Read More - Fits:
- HONDA DIO AF18
- HONDA DIO AF25
- HONDA DIO AF27
- HONDA DIO SR AF28
- HONDA DJ-1 RR AF19
- ...and more.
Thank you very much for cylibder, very good quality. Now my bike is really good working! I set up it on Honda Dio AF 18!+AA+Read More - Fits:
- HONDA DIO AF18
- HONDA DIO AF25
- HONDA DIO AF27
- HONDA DIO SR AF28
- HONDA DJ-1 RR AF19
- ...and more.
A good quality product, and shipping was in good time to replace the honda gornio cylinder, simple installation and i will be ordering more of theseRead More - Fits:
- HONDA
- HONDA
- HONDA
- HONDA
- HONDA
- ...and more.
A run can also make attachment common satisfactorily especially.
Since it is a standard Weight, a Timing in variable speed is also equivalent to a NORMAL.
It is reasonable, and it also has a price i...Read More - Fits:
- HONDA
- HONDA
- HONDA
- HONDA
- HONDA
- ...and more.
Or [ that it is good for the direction where a best Setting is not decided to try on this for the time being ].Inside is deep-black when merely removing a Pulley after a long time. -- Although it is n...Read More - Fits:
- HONDA
- HONDA
- HONDA
- HONDA
- HONDA
- ...and more.
[Webike Monitor] It purchased to the drive-system Setting of the > Scooter.
Attachment was also one-shot OK, without structure being bad especially although I thought that it was quite cheap.
I thi...Read More - Fits:
- HONDA
- HONDA
- HONDA
- HONDA
- HONDA
- ...and more.
Since it was cheap anyhow, it purchased for setting to today AF61. Six pieces enter, we come out and this price is recommended. since the price is cheap, there is slight uneasiness in durability, but ...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING