- Fits:
- HONDA FTR250 86 /II [Application Areas/Number of Discs]Front/Single Disc [Compatibility]◎
- HONDA FTR223 00-15 [Place of use/Number of discs]Front/Single disc [Compatibility]○ ○
- HONDA CB223S 08-15 [Position/Number of discs]Front/Single disc [Goodness of fitment]◎
- HONDA CB250RS 85 [part used/number of discs] Front/single disc [degree of fitment
- SUZUKI SKYWAVE400 burgman 99 AN400X [part used]Rear [fitment]◎
- ...and more.
[How is it used?Exchanged.Was the installation difficult?I did not do it alone because it is a life-threatening part around the Brake, but installed it with a skilled person.How was your experience wi...Read More - Fits:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...and more.
I've been sticking with the Tokico 6 pods. This time I adopted CaliperOverhaul and baked paint instead of OEM. I think it's a good corrosion protection. I've heard that some people use seal tape to pr...Read More - Fits:
- SUZUKI Sky Wave 400 98-00
- SUZUKI Sky Wave 250 98-00
- SUZUKI Sky Wave 250 02
- SUZUKI RM250 88
- HONDA Lead 50 98-01
- ...and more.
[How is it used?Used on FTR223.Applications:Touring, Circuit, FlatDirtI bought and used two repeats as Front Brake Pads.Was the one you received as per Image?The color was just as I had imagined, and ...Read More - Fits:
- HONDA FTR250 86 /II [Application Areas/Number of Discs]Front/Single Disc [Compatibility]◎
- HONDA FTR223 00-15 [Place of use/Number of discs]Front/Single disc [Compatibility]○ ○
- HONDA CB223S 08-15 [Position/Number of discs]Front/Single disc [Goodness of fitment]◎
- HONDA CB250RS 85 [part used/number of discs] Front/single disc [degree of fitment
- SUZUKI SKYWAVE400 burgman 99 AN400X [part used]Rear [fitment]◎
- ...and more.
[How is it used?Used on FTR223.Applications:Street riding, Touring, Circuit, FlatDirtWas the one you received as per Image?Just like the image. The base metal, gold, is also chic and nice.The surface ...Read More - Fits:
- YAMAHA TW200 ALL MODEL
- YAMAHA TDR50 88
- YAMAHA RZ50 98-00
- YAMAHA SDR200 87
- YAMAHA MT-25 16
- ...and more.
I changed the Handlebar and strengthened the brake to go to Circuit.The performance may be the same as the OEM, but it is clearly better than the Parenthesis.It gives a great feeling of being tweaked....Read More - Fits:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...and more.
The OEM Bleeder Bolt is always going to Rust and Decay, so this Material:It is safer to replace it with Stainless Steel.Be sure to bleed the air and refill the fluid in the MASTER after replacement.Th...Read More - Fits:
- HONDA XL400VTRANSALP 92 ND06 [Frame No.]ND06-1000001 or later [Use part]Caliper side
- HONDA ST1100ST1100 PAN EUROPEAN 00 [part used] Caliper side
- HONDA X4 97-00 SC38 [part used]Caliper side
- HONDA X4 97 SC38 [Frame No.]SC38-1000001 or later [Use part]Caliper side
- HONDA XL400VTRANSALP 91 ND06 [Frame No.]ND06-1000001 or later [Use part]Caliper side
- ...and more.
ZrX1200 DAEG OEMHydraulic Clutch Bleeder Bolt This Material:I replaced it with a Stainless Steel one. The OEM Bleeder Bolt is made of steel and will always rust over time, so it's best to replace it. ...Read More - Fits:
- HONDA AX-1 87-89
- HONDA NC750X TypeLD 14
- SUZUKI GSR250S 14-15
- SUZUKI GSX250R 17-21 2BK-DN11A 2017 Model
- SUZUKI GSR250F 15
- ...and more.
Après avoir remplacé l'étrier et le disque de ma vieille moto par du matériel Beringer plus moderne qui conserve le look d'origine, le maitre cylindre d'origine en 1/2 pouce procurait un freinage manq...Read More - Fits:
- HONDA XL400VTRANSALP 92 ND06 [Frame No.]ND06-1000001 or later [Use part]Caliper side
- HONDA ST1100ST1100 PAN EUROPEAN 00 [part used] Caliper side
- HONDA X4 97-00 SC38 [part used]Caliper side
- HONDA X4 97 SC38 [Frame No.]SC38-1000001 or later [Use part]Caliper side
- HONDA XL400VTRANSALP 91 ND06 [Frame No.]ND06-1000001 or later [Use part]Caliper side
- ...and more.
It's a little bit expensive, but I think it's not a bad idea to change it because it's a part where corrosion is a concern. It is my personal impression that the dress-up effect is not so hopeful to b...Read More - Fits:
- HONDA XL400VTRANSALP 92 ND06 [Frame No.]ND06-1000001 or later [Use part]Caliper side
- HONDA ST1100ST1100 PAN EUROPEAN 00 [part used] Caliper side
- HONDA X4 97-00 SC38 [part used]Caliper side
- HONDA X4 97 SC38 [Frame No.]SC38-1000001 or later [Use part]Caliper side
- HONDA XL400VTRANSALP 91 ND06 [Frame No.]ND06-1000001 or later [Use part]Caliper side
- ...and more.
I bought this as a replacement from OEMvery high (Lol) Expensive for nothing. (Lol)The color of 64Titanium material of the same size is SilverTitanium and about 1000 yen.Quantity Stainless this time:2...Read More - Fits:
- HONDA Spacey 250 Freeway 84-92
- HONDA Lead 100 98-01
- HONDA Lead 50 98-01
- SUZUKI RM250 88
- SUZUKI Sky Wave 250 02
- ...and more.
I used it to maintain my FTR223 which I got from a friend but neglected. it is very helpful to have cheap and proper parts because OEM parts are hard to get. I test rode it and it was as good as the O...Read More - Fits:
- HONDA AX-1 87-89
- HONDA NC750X TypeLD 14
- SUZUKI GSR250S 14-15
- SUZUKI GSX250R 17-21 2BK-DN11A 2017 Model
- SUZUKI GSR250F 15
- ...and more.
I replaced the OEMMASTER because it was getting saggy.The Lever adjuster provides better touch and improved usability.Isn't Nissshin's good point that we have a wide range of repair parts and custom p...Read More - Fits:
- HONDA CB1100 SC11 [Genuine part number]35340-MA5-671 [Model name]CB1100FD [Type]U
- HONDA CB1100 SC11 [Genuine part number]35340-MA5-671 [Model name]CB1100FD [Type]SA
- HONDA CB1100 SC11 [Genuine part number]35340-MA5-671 [Model name]CB1100FD [Type]F
- HONDA CB1100 SC11 [Genuine part number]35340-MA5-671 [Model name]CB1100FD [Type]ED/G/H/IT
- HONDA CB1100 SC11 [Genuine part number]35340-MA5-671 [Model name]CB1100FD [Type]DK/DM
- ...and more.
It stopped working about a month after the replacement.Phenomenon:Stop-lamp is still on even if you don't hold Lever.It seems to have developed a sticking inside. Lubrication did not improve it.Well, ...Read More - Fits:
- SUZUKI Sky Wave 400 98-00
- SUZUKI Sky Wave 250 98-00
- SUZUKI Sky Wave 250 02
- HONDA Lead 50 98-01
- SUZUKI RM250 88
- ...and more.
I used it on my XR50. Originally, this is a motorcycle for children to ride, so I didn't need a high performance pad, so I chose it because of the price and the trustworthy Daytona product.When I repl...Read More - Fits:
- SUZUKI Sky Wave 400 98-00
- SUZUKI Sky Wave 250 98-00
- SUZUKI Sky Wave 250 02
- SUZUKI RM250 88
- HONDA Lead 50 98-01
- ...and more.
I'm using it on the front brake of my FTR223. I think it is the standard of the standard and works better than OEM. The appearance of the parenthesis also becomes better and there is nothing to say. Y...Read More - Fits:
- HONDA FTR250 86 /II [Application Areas/Number of Discs]Front/Single Disc [Compatibility]◎
- HONDA FTR223 00-15 [Place of use/Number of discs]Front/Single disc [Compatibility]○ ○
- HONDA CB223S 08-15 [Position/Number of discs]Front/Single disc [Goodness of fitment]◎
- HONDA CB250RS 85 [part used/number of discs] Front/single disc [degree of fitment
- SUZUKI SKYWAVE400 burgman 99 AN400X [part used]Rear [fitment]◎
- ...and more.
I installed it on SPACY100I used to use KITACO's, but the remaining capacity has been reducedThis time I went with RKNo squeaks and good initial braking, so I'm happy with itThe other question is what...Read More - Fits:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...and more.
I replaced a 2006 K7 OEM BreederValve with a fluid blotch in the OEM BreederValveIt is made of stainless steel and looks greatI don't know if seal tape is necessary, but just in caseRead More - Fits:
- HONDA AX-1 87-89
- HONDA NC750X TypeLD 14
- SUZUKI GSR250S 14-15
- SUZUKI GSX250R 17-21 2BK-DN11A 2017 Model
- SUZUKI GSR250F 15
- ...and more.
Motive for purchasingThe tank of OEMMaster Cylinder was shaved off by falling down So I changed it to Nisshin's different body Master CylinderVTR250's OEM Master Cylinder has a Master Tank Although it...Read More - Fits:
- YAMAHA TW200 ALL MODEL
- YAMAHA TDR50 88
- YAMAHA RZ50 98-00
- YAMAHA SDR200 87
- YAMAHA MT-25 16
- ...and more.
I replaced it with a BigBrake Disc, but the OEM Master Cylinder It is soft and I didn't understand the difference between the two, but the Master Cylinder of Nisshin The moment I changed to a new mode...Read More - Fits:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...and more.
No functional problemsIt's a hobby to change from OEM as it's not used very oftenThe front brake is compatibleI installed it on a non-compliant rear brake for a test run, but the Fluid leakedThe OEM h...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING