- Fits:
- HONDA CBR600RR PC40 13M/PC40-1600001-
- HONDA NC750X 14- RC72 14M/RC72-1000001-
- HONDA VFR1200F DualClutchTransmission
- HONDA FAZE Type S JBK-MF11 MF11E
- HONDA CB1100 EX
- ...and more.
As winter is finally here, I decided to install these heat grips so as to avoid the need to use thick gloves. Installation was a hassle as most of the fairings and the oil tank had to be removed in o...Read More - Since I have exchanged all of the past Brakey MasterCylinderCap of Motorcycle this time as wellBlack is not bland (Lol)It is easy to install and remove, but I want the little point you want.1. Remove ...Read More
- Fits:
- HONDA CBX750 HORIZON (84-) RC 18 Required number:4
- BMW K1200 RS 97- Required number:4
- BMW K1200 LT 97- Required number:4
- BMW K1200 GT 97- Required number:4
- BMW K75 C 85-96 Required number:3
- ...and more.
Used for vehicles equipped with Wolani Coil on SEROW 225 WE.In terms of comparison with the Iridium plugs, I feel that it exceeds performance from Idling to high rotation.For numerical rather than sen...Read More - Fits:
- HONDA FORZA Z 07-12 for Rear
- HONDA FORZA Z ABS 07-11 for Rear
- HONDA FORZA (MF10) 08-09 for Rear
- HONDA FORZA 300 for Rear
- HONDA FAZE 09|11-12 for Rear
- ...and more.
The OEM's Made in TaiwanTire became deathI replaced it with a reliable Tire maker.OEM's Taiwan was unpopular in Impression but I thought it was not as bad as I thought at all, but when I chang...Read More - Fits:
- HONDA PHANTOM200 (Reverse Import) Required number:1 pc
- HONDA FORESIGHT EX MF04 97-07 Required number:1
- HONDA FORESIGHT MF04 97-07 Required number:1
- HONDA FORESIGHT SE MF04 97-07 Required number:1
- HONDA Fort Lux300EX (4 wheel Buggy) (94-) Required number:1 pc
- ...and more.
Improvement of startability, improvement of Throttle response, and elongation from medium to high speed became very smooth. It is more expensive than other companies' products, but I think that it...Read More - Fits:
- HONDA PHANTOM200 (Reverse Import) Required number:1 pc
- HONDA FORESIGHT EX MF04 97-07 Required number:1
- HONDA FORESIGHT MF04 97-07 Required number:1
- HONDA FORESIGHT SE MF04 97-07 Required number:1
- HONDA Fort Lux300EX (4 wheel Buggy) (94-) Required number:1 pc
- ...and more.
I used BOR 12 LGS of RISK so far, but I tried to change it to BR 14 ZC this time.Torque is thick in LGS, but ZC is still going up to the low speed Torque further, the vibration of the Engine is also r...Read More - Fits:
- SUZUKI SKYWAVE250 burgman Type S 01-05 for Front
- YAMAHA MAJESTY250 (SG20J) 07-09|12|14 for Front
- SYM RV250i 16 for Front
- SYM RV200i 16 for Front
- SYM RV180i 17 for Front
- ...and more.
Compared to other Manufacturer's Tire Pirelli decided to buy because Pirelli has a lot of evaluation that it will last long. I have not exchanged yet so I can not say clearly, but I'm looking ...Read More - Fits:
- KAWASAKI W650 [EJ650E] 04
- KAWASAKI ZRX400 03
- KAWASAKI BALIUS2 03
- KAWASAKI BALIUS2 00
- KAWASAKI BALIUS2 01
- ...and more.
It is cheaper than OEM so it is economically saved. I am using it for 2018 formula CB1300SB. I can not evaluate the performance because I can not feel it, but I can relieve because I am a long-establi...Read More - Purchase at Care before sudden death due to Battery's lifetimePurchase by watching various reputations at NetPrice is high, satisfaction is highBuy Charger at the same time!Read More
- First of all, I feel a light weight feeling when I pick up the box at the time of purchase, surprised by the amount of Sponge which occupies half of the capacity in the box, I have doubts that the cap...Read More
- Fits:
- SUZUKI ADDRESSV125GLIMITED 2008 [Frame No.] CF4EA-100047 or later
- YAMAHA CYGNUS-X SR FI (CYGNUS X) 2016 [Frame No.] SEA5J-
- SUZUKI ADDRESSV125G 2008 [Frame No.] CF4EA-101607 or later
- SUZUKI ADDRESSV125G 2007 [Frame No.] CF46A - 530175 or later
- SUZUKI ADDRESSV125G 2006 [Frame No.] CF46A-500001 or later
- ...and more.
I thought about installing it on Fender Eliminator on another vehicle but I could not install it without clearance with License Plate LightRead More - Fits:
- DUCATI 669 MONSTER S2 S4RS 08-
- HONDA FORZA Z ABS 07-
- HONDA FORZA Si 13-
- HONDA FAZE 09-
- HONDA FAZE Type S 09-
- ...and more.
Purchased to Plugfor Replacement of BMW R1200GS. As I checked the plug hole in advance, it was quite deep, and it was previously Socket for 16 mm (To KLX 250) I was satisfied with the texture when I b...Read More - Fits:
- HONDA PS250 MF09 04-07
- HONDA FORZA Z ABS MF10
- YAMAHA MAJESTY250 SV 95-06 (OEMHandlebar impossible)
- YAMAHA MAJESTY250 (SG03J) 5SJ 02-06
- YAMAHA MAJESTY250 (4HC) 95-06
- ...and more.
i have honda ps250
im install hurricane bracket
this parts chrome shining very well
install no problem
but chrome bolt cap coating weakRead More - Correspondence terrible and even telephone telephone bills are staggering and I tell customers that I will call TEL by e-mail, even if I send the product and confirm it, it will be set as cash on deli...Read More
- Fits:
- HONDA LITTLE CUB JBH-AA01 AA02E
- HONDA LEAD125 2BJ-JF45 JF45E
- HONDA Integra EBL-RC71 RC70E
- HONDA 2019YM X-ADV (RC95-1200001-)
- HONDA GYROX 2BH-TD02 TA03E
- ...and more.
This led was hard find bt i found from this site thank first for that web bike team. The security system link with that easy plug and fit it to near mirror clam it is very bright at the night. It is...Read More - Fits:
- HONDA CBR600RR PC40 13M/PC40-1600001-
- HONDA NC750X 14- RC72 14M/RC72-1000001-
- HONDA VFR1200F DualClutchTransmission
- HONDA FAZE Type S JBK-MF11 MF11E
- HONDA CB1100 EX
- ...and more.
加热把手还没有装,因为买回来后发现还缺少对应的附件,要买对应摩托车型号的附件才能装上去,因此已经下单了,要等附件到了后才知道使用的效果,到时候安装好了后再一起评价,不过从表面上来看,东西的做工还是很不错的,唯一让我有点不满意的就是电源线是跟着把手一起转动的,是否会影响把手的操作感,还需要安装上了后通过时间来检验!
Heating the handle has not been install...Read More - Fits:
- HONDA CBR600RR PC40 13M/PC40-1600001-
- HONDA NC750X 14- RC72 14M/RC72-1000001-
- HONDA VFR1200F DualClutchTransmission
- HONDA FAZE Type S JBK-MF11 MF11E
- HONDA CB1100 EX
- ...and more.
HondaOEM's Grip heater was attached to the ninja 1000.LeftGrip can not be inserted easily, difficulty. I managed to insert it by spraying GlassCleaner.Easy as RightGrip is integrated with Throttle...Read More - Fits:
- HONDA CBX750 HORIZON (84-) RC 18 Required number:4
- BMW K1200 RS 97- Required number:4
- BMW K1200 LT 97- Required number:4
- BMW K1200 GT 97- Required number:4
- BMW K75 C 85-96 Required number:3
- ...and more.
I have heard the reputation of this Plug, but I tried buying it to be handled by Webike.So far as Watani's designation OEM DPR Gap 1. I adjusted it to 3 mm and used it. Ignition system and lightin...Read More - Since there are two Motorcycle, it is the second purchase, the first Battery is still in use even in the fifth year. I can be satisfied with Cost like this alone.Read More
- Fits:
- HONDA CBR600RR PC40 13M/PC40-1600001-
- HONDA NC750X 14- RC72 14M/RC72-1000001-
- HONDA VFR1200F DualClutchTransmission
- HONDA FAZE Type S JBK-MF11 MF11E
- HONDA CB1100 EX
- ...and more.
I installed it in XSR 900.Switch part can be installed as Refreshing with Grip integral type, temperature adjustment also has three stages so it seems to be useful in various situations.For installati...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING