- Fits:
- HONDA CBR500R
- YAMAHA MAJESTY250(SG03J) 00-02
- YAMAHA MAJESTY250(4HC) -99
- YAMAHA YZF750SP 95
- YAMAHA YZF-R1 98-01
- ...and more.
I installed it on my KATANA. I purchased the C Type because I modified the OilPressure part to install the Sensor.Read More - Fits:
- HONDA PRESS CUB 50 (CUB PRESS) C50 [Genuine part number]38110-GB4-701/38110-GB4-702 [Model name]C50BNJ-1 [Type]BN-1
- HONDA PRESS CUB 50 (CUB PRESS) C50 [Genuine part number]38110-GB4-701/38110-GB4-702 [Model name]C50BNDJ-1 [Type]BND-1
- HONDA PRESS CUB 50 (CUB PRESS) C50 [Genuine part number]38110-GAC-000/38110-GB4-702 [Model name]C50BNN-1 [Type]BN-1
- HONDA XR230 MD36 [Genuine part number]38110-KAY-008 [Model name]XR2309 [Type]J/2J
- HONDA PRESS CUB 50 (CUB PRESS) C50 [Genuine part number]38110-GAC-000/38110-GB4-702 [Model name]C50BNK-1 [Type]BN-1
- ...and more.
Replaced because it was rusted and no longer useful.It's compatible and Universal, but it's also very practical because it sounds decent.It's not expensive, so it's helpful.good pointIt is easy to ins...Read More - Fits:
- YAMAHA YZF-R3
- HONDA CBR500R
- YAMAHA MAJESTY250(SG03J) 00-02 Oil temperature sensor (sensor mounting position/left side of drain bolt)
- YAMAHA XG250 TRICKER XG250 Oil temperature sensor (sensor location/left drain bolt of crankcase)
- YAMAHA CYGNUS X SR All years Oil temperature sensor (sensor mounting position and oil pan drain bolt)
- ...and more.
Without it, Oil Temperature Meter is not available.I think it could be a little cheaper.Read More - Fits:
- YAMAHA YZF-R3
- HONDA CBR500R
- YAMAHA MAJESTY250(SG03J) 00-02 Oil temperature sensor (sensor mounting position/left side of drain bolt)
- YAMAHA XG250 TRICKER XG250 Oil temperature sensor (sensor location/left drain bolt of crankcase)
- YAMAHA CYGNUS X SR All years Oil temperature sensor (sensor mounting position and oil pan drain bolt)
- ...and more.
YOSHIMURA's PRO-GRESS1 Temp/Bolt Meter and Quantity for 4mini's Oil Temperature Control:SetUse.It's been about 3 years now and it still works fine.Since the wiring is facing downward, I was worried th...Read More - Fits:
- SUZUKI GSX-R1100 (GU74A)
- SUZUKI GSX-R1100 (GV73A)
- HONDA CBR250RR (MC22)
- HONDA CBR250R (1-light vehicle MC41)
- HONDA CBR125R (JC50)
- ...and more.
I felt that it became brighter, but it did not pass the inspection. I had to replace the light with a simple Orange light at a motorcycle shop to pass the inspection. It was expensive.Read More - Fits:
- HONDA SHADOW750 98-04 VT750
- HONDA VT250 SPADA (MC20 1000012-)
- HONDA MAGNA(V-TWIN MAGNA) (MC29) VT250
- HONDA SHADOW125 VT125
- HONDA VTR1000FVTR1000F FIRESTORM (SC36)
- ...and more.
I still think OEM is the way to go.Read More - Fits:
- HONDA SHADOW750 98-04 VT750
- HONDA VT250 SPADA (MC20 1000012-)
- HONDA MAGNA(V-TWIN MAGNA) (MC29) VT250
- HONDA SHADOW125 VT125
- HONDA VTR1000FVTR1000F FIRESTORM (SC36)
- ...and more.
It's an old motorcycle so I replaced it before it failed. The work is easy, just remove the Cowl and replace with OEM. The bolt holes for installation are Exactly the same, so there is no need for mac...Read More - Fits:
- SUZUKI GSX-R1100 (GU74A)
- SUZUKI GSX-R1100 (GV73A)
- HONDA CBR250RR (MC22)
- HONDA CBR250R (1-light vehicle MC41)
- HONDA CBR125R (JC50)
- ...and more.
It can be installed on B type 9R without any problem, but it is difficult to install without removing the Upper Cowl because the Spring that holds the Valve interferes with the Heat sink during instal...Read More - Fits:
- SUZUKI SKYWAVE250 burgman 98-05 CJ43A Water Temperature Gauge [Engine left thermo housing] (*3)
- YAMAHA YZF-R1 98-01 [water temperature gauge] [position:replace STD sensor]
- SUZUKI SKYWAVE650 burgman 02 [Water temperature gauge] [Position:radiator hose (adapter required)
- SUZUKI BANDIT1250 07-08 [Water temperature gauge] [Position:radiator hose (adapter required)] (*2)
- SUZUKI BANDIT250 -94 (with cowl) [water temperature gauge] [position:replace STD sensor]
- ...and more.
[How is it used?YOSHIMURA Required for Meter.You have to buy it.If you wrap the seal tape around the TaperScrew and install it, it won't leak so much.Easy electrical connectionWas the one you received...Read More - Fits:
- HONDA CBR500R
- YAMAHA MAJESTY250(SG03J) 00-02
- YAMAHA MAJESTY250(4HC) -99
- YAMAHA YZF750SP 95
- YAMAHA YZF-R1 98-01
- ...and more.
I installed it on my NSR250.The OEM has a 2-pole coupler compared to Bullet Terminal, so it is installed with Rose Wiring.Confirm that the water temperature gauge is working after installation.We'll r...Read More - Fits:
- SUZUKI GSX-R1100 (GU74A)
- SUZUKI GSX-R1100 (GV73A)
- HONDA CBR250RR (MC22)
- HONDA CBR250R (1-light vehicle MC41)
- HONDA CBR125R (JC50)
- ...and more.
It is written that it corresponds to H4 Valve, but it is inaccurate and it is not possible to install it without removing it to some extent with File, and it doesn't fit in the Headlight because it is...Read More - Fits:
- YAMAHA YZF-R1 RN24J [stock number]4HM-83980-00
- YAMAHA XJR400S 4HM [stock number]3FV-83980-00
- YAMAHA XJR400RII 4HM [stock number]3FV-83980-00
- YAMAHA XJR400R RH02J [stock number]4HM-83980-00
- YAMAHA XJR400R 4HM [stock number]3FV-83980-00
- ...and more.
It was broken before I knew it, so I replaced it. Normal Switch with nothing of note at all, thank goodness it's inexpensive, nothing to write 60 words on. Normal.Read More - Fits:
- HONDA CBR500R
- YAMAHA MAJESTY250(SG03J) 00-02
- YAMAHA MAJESTY250(4HC) -99
- YAMAHA YZF750SP 95
- YAMAHA YZF-R1 98-01
- ...and more.
It is easy to install. it is highly recommended that the WaterproofTape is pre-wrapped. Couplet-on so anyone can use it!Read More - Fits:
- HONDA CBR500R
- YAMAHA MAJESTY250(SG03J) 00-02
- YAMAHA MAJESTY250(4HC) -99
- YAMAHA YZF750SP 95
- YAMAHA YZF-R1 98-01
- ...and more.
I bought Progress and I bought this one as well for water temperature procurement.I think all the sensors are the same, but the coupler may be different depending on the object, so I have arranged the...Read More - Fits:
- SUZUKI GSX-R1100 (GU74A)
- SUZUKI GSX-R1100 (GV73A)
- HONDA CBR250RR (MC22)
- HONDA CBR250R (1-light vehicle MC41)
- HONDA CBR125R (JC50)
- ...and more.
I wanted a brighter headlight with the old VMAX, so I decided to use Multi-reflector and Large diameter head, but I wanted a brighter light with the current appearance and aimed for LED.I tentatively ...Read More - Fits:
- YAMAHA YZF-R1 RN24J [stock number]4HM-83980-00
- YAMAHA XJR400S 4HM [stock number]3FV-83980-00
- YAMAHA XJR400RII 4HM [stock number]3FV-83980-00
- YAMAHA XJR400R RH02J [stock number]4HM-83980-00
- YAMAHA XJR400R 4HM [stock number]3FV-83980-00
- ...and more.
After 20 years, the Brake switch has been extremely malfunctioning and seems to have reached its limits, a few years ago It was repaired in sections, but the contact point also deteriorated I gave up ...Read More - Fits:
- YAMAHA YZF-R3
- HONDA CBR500R
- YAMAHA MAJESTY250(SG03J) 00-02 Oil temperature sensor (sensor mounting position/left side of drain bolt)
- YAMAHA XG250 TRICKER XG250 Oil temperature sensor (sensor location/left drain bolt of crankcase)
- YAMAHA CYGNUS X SR All years Oil temperature sensor (sensor mounting position and oil pan drain bolt)
- ...and more.
i bought it at for MONKEYIt's nice and luxuriousThe wiring can't be removed, it's right out underneathI thought it would be nice if it was an inset PatternRead More - Fits:
- SUZUKI GSX-R1100 (GU74A)
- SUZUKI GSX-R1100 (GV73A)
- HONDA CBR250RR (MC22)
- HONDA CBR250R (1-light vehicle MC41)
- HONDA CBR125R (JC50)
- ...and more.
I've been interested in it for a while, so I bought it to try it out! 。 Since there is a Large heat sink compared to the Halogen bulb, you can avoid it and use it as a heat sink Quantity lock Bracket:...Read More - Fits:
- DUCATI 350F3
- DUCATI 400 F3 Oil temperature gauge] [Position:oil pan drain bolt] (*1)
- DUCATI 400SS Oil temperature gauge] [Position:oil pan drain bolt] (*1)
- DUCATI 748 Oil temperature gauge] [Position:Oil pan drain bolt] (*1)(*5)
- DUCATI 750F1 Oil temperature gauge] [Position:oil pan drain bolt] (*1)
- ...and more.
使用车型;kawasaki ninja zx6r 2012年
我购买吉村TYPE-K油温表,由于ninja zx6r原车并没有配备油温传感器
所以需要另外购买匹配的传感器,否则TYPE-K油温表时不能工作的!
传感器是替换原装放油螺丝,型号是M12*1.5
Use model; kawasaki ninja zx6r 2012
I bought the Yicun TYPE-K oil ...Read More - Fits:
- KAWASAKI BALIUS2 98 [Frame No.] ZR250B-007001 to 014000
- KAWASAKI BALIUS2 97 [Frame No.] ZR250B-000001 to 007000
- KAWASAKI BALIUS2 05 [Frame No.] ZR250B-035001 to 038000
- KAWASAKI BALIUS2 04 [Frame No.]ZR250B-028001 or later
- KAWASAKI BALIUS2 03 [Frame No.] ZR250B-025001 to 028000
- ...and more.
Compared with OEM, WaterproofRubber is too big, so it's not easy to fit,Valve exchange etc etc. Light unit desorption at (3 places Bolt) It took three times more time.Because it is a work while pr...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING