- Fits:
- YAMAHA YZF-R1 04
- YAMAHA YZF-R6 04
- YAMAHA YZF-R1 05
- YAMAHA YZF-R6 05
- YAMAHA FZ1 06 S
- ...and more.
There were a couple of other parts that I wanted to get for my wife's MT09 which will help protect the bike if there is any accident. These are what I decided to get and the added bonus os that not on...Read More - Fits:
- DUCATI MONSTER S4R 07-08 *-'06 does not fit.*Does not fit S4RS.
- DUCATI MULTISTRADA 1000DS1260
- DUCATI MULTISTRADA 1000DS950
- DUCATI MULTISTRADA 1000DS1200 DVT
- DUCATI MULTISTRADA 1000DS1200
- ...and more.
It is perfect for the Front undercarriage support.Installation is also very easy!Read More - Fits:
- DUCATI MONSTER 821
- DUCATI MONSTER 1200
- DUCATI MONSTER 821 Stripe
- DUCATI MONSTER 1200S
- DUCATI MONSTER 1200R
- ...and more.
As I said, it is made by AELLA, so it has a good texture and elegant appearance.The work itself was not difficult, and I was able to install it smoothly, but I had to shift the Water Hose 1m Diameter ...Read More - Fits:
- YAMAHA General-purpose* All Yamaha vehicles since 1998
- TRIUMPH DAYTONA675 -09 *Measurement of hole diameter with caliper required
- DUCATI MONSTER S2821
- DUCATI Panigale 899.
- APRILIA SL750
- ...and more.
The aprilia RS250 First Model Type LD0, which I got second hand, can be attached to the screw hole that was originally on the Rear Swing Arm without any problem.I don't know how it works as a slider s...Read More - Fits:
- DUCATI
- DUCATI
- DUCATI
- DUCATI
- DUCATI
- ...and more.
I use it on my ninja1000sx. I have short legs and the bar that pays with the OEMSTAND leg is too short, so it was very difficult to raise and lower the Side Stand. With this product installed, it was ...Read More - Fits:
- YAMAHA General-purpose* All Yamaha vehicles since 1998
- DUCATI MONSTER S2821
- TRIUMPH DAYTONA675 -09 *Measurement of hole diameter with caliper required
- DUCATI Panigale 899.
- APRILIA RSV1000 Series
- ...and more.
Works great with JTrip StandRead More - Fits:
- DUCATI MONSTER 821
- DUCATI MONSTER 1200
- DUCATI MONSTER 821 Stripe
- DUCATI MONSTER 1200S
- DUCATI MONSTER 1200R
- ...and more.
In the event of a fall, the damage to the vehicle body will be kept to a minimum!The look of the design is Parenthesis good ♪A little cheaper would be appreciated wRead More - Fits:
- DUCATI
- DUCATI
It is long and secure.Haven't gotten around to using it yet, but you should install it before you put a dent in your Tank! I think the Cost performance is high as insurance.Read More - Fits:
- DUCATI
- DUCATI
- DUCATI
- DUCATI
- DUCATI
- ...and more.
DUCATI doesn't have a stick to make the side stand easier, which is common in Japanese cars.It's hard to STAND.Thanks to thisParts for the help.Read More - Fits:
- DUCATI
- DUCATI
- DUCATI
- DUCATI
- DUCATI
- ...and more.
It is hard to get the STAND out and the height of the motorcycle is high, so it is very safe after installation.Read More - Fits:
- DUCATI Monster 1200
- DUCATI Monster 821
- DUCATI Multistrada 1200
- DUCATI SuperSport 939
- DUCATI 1198 Superbike
- ...and more.
I used it on my HYPERMOTARD 821, and the Engine Guard is also from them, and I felt very secure with the length of the slider and the wide range of protection. The price is reasonable and I would reco...Read More - Fits:
- DUCATI DESERTX 937 22
- DUCATI HYPERMOTARD 939 SP 16-18
- DUCATI HYPERMOTARD 939 16-18
- DUCATI HYPERMOTARD 950 SP 19-22
- DUCATI HYPERMOTARD 950 19-22
- ...and more.
I bought it to protect my car's water pump.Since the water pump will not work if it breaks by falling over, etc., I prepared for the unexpected.It's very easy to install, just replace the NORMAL bolts...Read More - Fits:
- YAMAHA YZF-R1 04
- YAMAHA YZF-R6 04
- YAMAHA YZF-R1 05
- YAMAHA YZF-R6 05
- YAMAHA FZ1 06 S
- ...and more.
I used it for MT-09SP. The compatibility with JTrip is not bad.I don't know how it will work with other STANDs.Yamaha for some reason is thin on the M6, so you shouldn't raise it up and straddle it wi...Read More - Fits:
- DUCATI MONSTER 821 *Cantilever swing arm|Fits vehicles with recessed mounting area
- DUCATI 959Panigale *Cantilever swing arm|Fits vehicles with recessed mounting area
- DUCATI 899Panigale *Cantilever swing arm|Fits vehicles with recessed mounting area
I was sent a different color. I want to return it and exchange it, but I get an error message and can't. Please take action as soon as possible.I'm not even sure where to contact you, I'll post it on ...Read More - Fits:
- DUCATI MONSTER 821 14-15
- DUCATI MONSTER 1200 14-15
After much debate, I decided to install the BABY FACE Frame Slider I had already installed the Axle Slider and I wasn't sure how effective it would be, but I decided to install the BABY FACE Frame Sli...Read More - Fits:
- DUCATI MONSTER 821 14-15
- DUCATI MONSTER 1200 14-15
I've been a customer of Panigale and CBR, so I'm going to use this one again because I trust it Manufacturer The installation is just screwed in, except for using Screw LockIt will also stop the impac...Read More - Fits:
- DUCATI MONSTER821 14-
- DUCATI MONSTER1200 14-
I went touring for the first time after the installation, but one of them came off and was lost It's exactly as described in the Instruction Manual, and the BoltBody is still intact Only the black par...Read More - Fits:
- DUCATI MONSTER 821 *Cantilever swing arm|Fits vehicles with recessed mounting area
- DUCATI 959Panigale *Cantilever swing arm|Fits vehicles with recessed mounting area
- DUCATI 899Panigale *Cantilever swing arm|Fits vehicles with recessed mounting area
As the name suggests, it was a Stand Hook&SliderAs a Slider, I'd prefer not to work, but just recently I was careless and what a standing joke!Front Axle Slider and Engine SliderThe cowl was not damag...Read More - Fits:
- DUCATI
- DUCATI
- DUCATI
- DUCATI
- DUCATI
- ...and more.
I installed it on a Monster1200s 2020When you put this on, it becomes very easy to put out the Side StandPretty much the Parts of Recommendation!Read More - Fits:
- DUCATI
- DUCATI
- DUCATI
- DUCATI
- DUCATI
- ...and more.
I felt that SCRAMBLER was difficult to take out Side Stand, but I was able to make Stand End I thought I could manage to put it on, but in the end I couldn't, so I installed it after a while since I b...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING