- Fits:
- BMW S1000RR 19-23
- BMW S1000R 21-23
收到货后第一时间打开看,非常开心,外包装很严实,做工一级棒,质感也非常好,螺丝配件齐全,logo清晰明显,安装的时候师傅需要认真点要使用配套的螺丝,原车原厂的不能用,装完以后很好看,发动机盖保活应该没什么问题。
----------------------------------------------------------
After receiving the goods, I ...Read More - Fits:
- BMW S1000XR 999cc All (2017)
- BMW S1000RR 999cc All (2017)
- BMW S1000R 999cc All (2017)
- BMW S1000XR 999cc All (2016)
- BMW S1000RR 999cc All (2016)
- ...and more.
I don't know if it's an individual difference, but in my case, it seemed to be a mismatch with the fuel conditioner. The intake sound was brisk, but there was a lag with the Axel opening, and it felt ...Read More - Fits:
- BMW RnineT 13-19 K21
- BMW S1000RR 10-18
- BMW R1250RS 18-19 K54
- BMW R1250GS 17-19
- BMW R1250GS ADV 17-19
- ...and more.
I am on the Boxer engine.We change the oil every 2,000 to 3,000km, but we want to keep the cost low.I've been paying a little over 2,000 yen for KIJIMA's Filter, but this one's less than 1,000 yen! (G...Read More - Fits:
- BMW S1000XR 14-20 K49
- BMW S1000RR 08-16 K46
- BMW S1000R 13-16 K47
- BMW R900 RT K26 05-13
- BMW R850RT 96-01 259
- ...and more.
I use it on my R nineT.Whenever you change the oil, you should change the gasket as well.It's inexpensive and I will be using this product next time around.Read More - Fits:
- BMW RnineT 13-19 K21
- BMW S1000RR 10-18
- BMW R1250RS 18-19 K54
- BMW R1250GS 17-19
- BMW R1250GS ADV 17-19
- ...and more.
Just because it's a BMW doesn't mean you have to use expensive wear and tear parts.All you have to do is replace it sparingly with something that fits the neat standard.I've been using KIJIMA's Magnet...Read More - Fits:
- HUSQVARNA NUDA 900R 898cc All 12
- HUSQVARNA NUDA 900 898cc All 12
- BMW S1000XR 999cc All 16-20
- BMW S1000XR 999cc All 17-20
- BMW S1000XR 999cc All 15-20
- ...and more.
I recommend the Glasses Wrench as it is all you need.Read More - Fits:
- YAMAHA YZF-R1 09-13 (for North America) Oil temperature sensor (sensor location/ oil gallery at lower right of crankcase)
- YAMAHA YZF-R1 09-13 (Domestic) Oil temperature sensor (sensor installation position and oil gallery at lower right of crankcase)
- YAMAHA YZF-R1 04-05 Oil temperature sensor (sensor installation position/crank case left oil gallery)
- YAMAHA XJR1300 98-10 Oil temperature sensor (sensor mounting position/oil pan right side gallery)
- YAMAHA XJR1200 93-97 Oil temperature sensor (sensor mounting position/oil pan right side gallery)
- ...and more.
I used it on my GS1200SS.Read More - Fits:
- SUZUKI RGV-Γ250 All years [Fitting size]M14 P=1.25 [Reference tightening torque]24N・m
- YAMAHA TZR250R 91-99 [Fit size]M10 P=1.25 [Reference tightening torque]18N-m
- HONDA NSR250R 88-99 [Fit size]M10 P=1.25 [Reference tightening torque]18N-m
- KAWASAKI ZX-4R 23-
- SUZUKI Wolf All years [Fitting size]M14 P=1.25 [Reference tightening torque]24N・m
- ...and more.
[How is it used?I bought it when I found out that Webike also started to handle SUPER NOW.You are famous for Attack in Tsukuba.Unfortunately, I don't have an On road vehicle, so I bought this one that...Read More - Fits:
- BMW S 1000 XR 18-19
- BMW S 1000 XR 14-19
- BMW R 1250 RS 14-19
- BMW R 1250 RT 13-19
- BMW S 1000 R 13-19
- ...and more.
Cheaper than OEM Parts and even cheaper with the summer big sail.You can use this product with confidence because it is made by KIJIMA, not by an unknown Other Brand Product.I bought this product to m...Read More - Fits:
- BMW S1000RR 10-11
- BMW S1000RR 12-14
- BMW S1000RR 15-16
I bought this to prevent RadiatorCore from collapsing.The Motorcycle I used to ride didn't have such a Guard, and that's why the fins would get crushed by stepping stones, etc. and not cool → going to...Read More - Fits:
- BMW R1200RT 06 1170 - All
- BMW R1200RT 07 1170 - All
- BMW R1200RT 08 1170 - All
- BMW R1200RT 09 1170 - All
- BMW R1200RT 10 1200 - All
- ...and more.
Good, no problem at all for Oil Filter function.There are two things that make me personally happy.One is that the tip has a protrusion so that it can be turned with a 17mm Wrench.The other is that it...Read More - Fits:
- BMW S1000RR 15-
I used it on my S1000RR Racer.I could not get used to the feeling of Brake through ABSUnit. In addition, when I was running with Circuit, I had a feeling that the heat drain was early, so I thought th...Read More - Fits:
- YAMAHA YZF-R1 09-13 (for North America) Oil temperature sensor (sensor location/ oil gallery at lower right of crankcase)
- YAMAHA YZF-R1 09-13 (Domestic) Oil temperature sensor (sensor installation position and oil gallery at lower right of crankcase)
- YAMAHA YZF-R1 04-05 Oil temperature sensor (sensor installation position/crank case left oil gallery)
- YAMAHA XJR1300 98-10 Oil temperature sensor (sensor mounting position/oil pan right side gallery)
- YAMAHA XJR1200 93-97 Oil temperature sensor (sensor mounting position/oil pan right side gallery)
- ...and more.
I bought this at the same time as YOSHIMURAMulti-temp meter.GS1200SS is attached to the Left SideOil pump feed side.It can be mounted on the Right, but I don't think it will give an accurate temperatu...Read More - Fits:
- YAMAHA YZF-R1 09-13 (for North America) Oil temperature sensor (sensor location/ oil gallery at lower right of crankcase)
- YAMAHA YZF-R1 09-13 (Domestic) Oil temperature sensor (sensor installation position and oil gallery at lower right of crankcase)
- YAMAHA YZF-R1 04-05 Oil temperature sensor (sensor installation position/crank case left oil gallery)
- YAMAHA XJR1300 98-10 Oil temperature sensor (sensor mounting position/oil pan right side gallery)
- YAMAHA XJR1200 93-97 Oil temperature sensor (sensor mounting position/oil pan right side gallery)
- ...and more.
[How is it used?This time I installed it on XJR1300C. The installation position is the same as the normal XJR, straddling the Right SideOil pan side.Was the one you received as per Image?I am very sat...Read More - Fits:
- BMW S1000RR 19-20
The stepless WavePattern is beautiful.But I'm concerned if Small stones or other objects get caught in it.It does not come with an Instruction Manual for handling.Installation can be a bit difficult.Read More - Fits:
- HUSQVARNA NUDA 900R 898cc All 12
- HUSQVARNA NUDA 900 898cc All 12
- BMW S1000XR 999cc All 16-20
- BMW S1000XR 999cc All 17-20
- BMW S1000XR 999cc All 15-20
- ...and more.
R1250GSA (19) I've used it on the BMW, and the packing texture is better than the BMW OEM.Read More - Fits:
- BMW S1000XR 20-
- BMW S1000XR -19
- BMW S1000RR 19-
- BMW S1000RR 17-18
- BMW S1000RR 15-16
- ...and more.
I came to purchase the OEM Drain bolt because it was nerfed. This is the only one in stock that fits the Webike and it was a bit expensive. If it's a domestic product, there might be cheaper ones, but...Read More - Fits:
- BMW S1000RR 19-20
Just like the OEM Product is just fit.The oil cooler guard was installed at the same time.It's quite a Gold amount, but it feels strong and secure.Read More - Fits:
- BMW S1000XR 14-20 K49
- BMW S1000RR 08-16 K46
- BMW S1000R 13-16 K47
- BMW R900 RT K26 05-13
- BMW R850RT 96-01 259
- ...and more.
It's a good product with no problems.It doesn't feel particularly cheap and is safe to use.It's a trustworthy brand, and it's a good cosmetic brand as well.I will continue to use it in the future.Read More - Fits:
- BMW R1200ST 1170cc All 07
- BMW S1000RR 990cc All 09
- BMW R900RT 900cc All 05
- BMW R1200S 1170cc All 07
- BMW R1200ST 1170cc All 06
- ...and more.
I was able to install it without any problems.I don't know what it feels like to use it.However, I will continue to use it because it is a reliable brand and a good cosmetic product.Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING